Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD

Product information "Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD"

Genuine HT spare/option part.

Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).

You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.

Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping.
Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.

Set includet:


Contents:
  • 1 set


018ddb1a8ead7040b0e8c7eafd382b85.jpg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1528 Bearing puller for differentials
Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

8505 FG Mounting tool for bevel gear wheels - 1pce.
We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

Average rating of 0 out of 5 stars

y0809 Klüber high performance grease for differentials
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Similar products

Average rating of 0 out of 5 stars

2015-Light Mecatech Active Differential for 1/5 scale cars
Genuine Mecatech spare/option part.New design for the Active Diff! It is lighter, smaller and it haven´t the adjustment screw. The inner parts are the same of the standard version.Heavy-duty, torque dependent self-locking differential with various possibilities for adjustment.The use of four satellite gears distributes the load on four ramps, increasing their service life compared to already existing solutions. Needle bearings on the back of the satellite gears ensure smooth operation of the ramp system.For adaption to the grip conditions you can choose from two different pairs of steel and carbon friction disks and ramp bells. The latter have 3 different ramp angles per pair of bells. All versions are included.Differential spur gear and ball bearings are vehicle-dependent and therefore not included.Content:1 x complete Mecatech Active Diff assembled with bell B for high grip2 x bell A for low grip4 x Carbon discs outer diameter 30 mm4 x Steel discs inner diameter 24 mm1 x Bottle of diff oil

€449.90*

Average rating of 0 out of 5 stars

LOS252070/01 Losi Front Differential complete, Super Baja Rey 2.0
Genuine Losi spare/option part. Complete mounted and filled.Contents:1 piece

€104.90*

Average rating of 0 out of 5 stars

104963 HPI Complete HD alloy diff gear Baja 5SC
Genuine HPI spare/option part. Assembled alloy diff wit 100er silicon oil.Seriously beef up your Baja drivetrain with the Complete HD Alloy Diff Gear Set! This is standard equipment on the Baja 5SC but will easily fit the Baja 5B, Baja 5B 2.0, Baja 5B SS and Baja 5T to dramatically increase the longevity and strength of your buggy or truck's drivetrain. The Baja 5SC features all-new Super Heavy Duty drivetrain parts that dramatically increase the fun you can get out of your Baja, plus an all-new one-piece rear hub carrier (#104781) that features adjustable rear toe inserts for extra race tuning!Contents:1 piece

€170.50*

Average rating of 0 out of 5 stars

8485/05 FG Alloy differential adjustable - 1pce.
Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.

€149.50*

Average rating of 0 out of 5 stars

8500/05 FG Alloy differential self-locking double - 1pce.
Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.

€186.95*

Average rating of 0 out of 5 stars

Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD
y0570 Typ: y0571 For Carson cars
Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set

€189.90*

Average rating of 0 out of 5 stars

ARA310937 ARRMA Assembled Diff Set F/R for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces

€134.99*

Average rating of 0 out of 5 stars

LOS252070/02 Losi Middle Differential complete, Super Baja Rey 2.0
Genuine Losi spare/option part. Complete mounted and filled.Contents:1 piece

€104.90*

Average rating of 0 out of 5 stars

8501/05 FG Alloy differential self-locking fourfold
Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool: 8505 FG for bevel gear installation.Contents:1 set

€219.95*

Average rating of 0 out of 5 stars

8483/05 FG Alloy differential for 1:5 and 1:6
Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€137.50*

Average rating of 0 out of 5 stars

68405 FG Alloy differential 4WD complete
Genuine FG spare/option part. Precise, solid and reliable, for use at competitions, not adjustable.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Content:1 set

€151.95*

Average rating of 0 out of 5 stars

LOS252055 Losi Center Differential Complete 67 Teeth MTXL
Genuine Losi spare/option part.Contents:1 piece

€119.90*

Customers also viewed

Average rating of 0 out of 5 stars

Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD
y0570 Typ: y0571 For Carson cars
Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set

€189.90*

Average rating of 0 out of 5 stars

8486 FG Alloy differential housing - 1pce.
Aluminium version solves the problem of tweaking differential cases under high torque applications.

€60.00*

Average rating of 0 out of 5 stars

6295 FG Rear alloy support roll for Monster-Truck models
Genuine FG spare/option part. Contents:1 piece

€99.95*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development