FG

y0781 Dry-Fluid Extreme especially for RC-Cars, 20 ml

Dry lubricant instead of oilWe did not think that today its still possible to make a real improvement in lubricants!DryFluid Extreme is especially designed for remote control model cars, with the aim to maintain the functionality and durability of these little racers as long as possible or to even extend significantly.The effect of the new lubricants for shafts, bearings, guides and ball joints starts where other lubricants reach their limits. Low friction, high lubricity and minimal attractivity to dust or dirt were the main developmental targets. Recent findings in aerospace and automotive technology as well as the experience of RC car drivers are the mentors of innovation of this new lubricant.What is DryFluid Extreme RC-Cars?DryFluid lubricant is more of a solid lubricant than a classic fluid one. DryFluid is not a wax, not oiling, non-greasy and free of silicones. The use of dry particles, polymer lubricants and high-end lubricating fluids results in a previously unknown lubricity without binding dust and dirt. Ease of application and long-term effects of DryFluid Extreme will delight any modeler.DryFluid Extreme product featuresReduces the power losses of shafts, bearings and ball joint systems and guarantees a long life of the treated componentsLowest friction for smooth operation and wear reductionMultistage lubricant system with immediate and long-term lubrication effectsDoes not bind any dust or dirtExtremely good penetrating abilityHighest compatibility with all common materials like metals, plastics and rubberExcellent adhesion and corrosion protection propertiesThe use of DryFluid Extreme RC-CarsThe main effect of DryFluid Extreme is the reduction of friction and wear on shafts, bearings, guides and ball joint systems. The dry components do not bind any dust or dirt and ensure best possible long term lubrication effects.For best results the parts to be treated should be thoroughly cleaned and the fluid applied sparingly. Repeated use increases the long-term effect.Before use, shake bottle vigorously for a short time!Nanotec lubricant for joints, shafts, bearings and gears of rc-cars. Excellent long term lubrication effects. Use included put-on canula for fine dosing. Let dry for several minutes after application and close bottle tightly. Shake well before use Attention:Keep out of reach of children. Do not swallow. Avoid contact with eyes. Keep away from ignition sources. Keep bottle closed tightly.

Content: 20 Milliliter (€845.00* / 1000 Milliliter)

€16.90*

Ball bearings for FG, sealed, diverse sizes

lager_0003 Size: y19610-rs For alloy differential, 2 pieces+ 5.4EUR

Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

Variants from €10.70*

€16.10*

4411/06 FG bearing set with grease filling EVo/Competition

Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€47.50*

y0462 Ceramic - Hybrid bearings for FG 4WD tensioning pulley, 1 pcs.

Single spare parts to replacement number: y0460Ceramic ball bearings suitable for the aluminum and plastic shaft bearings of the clamping roller in the back tension roller housing for all 4WD models FGDimensions: 10 x 19 x 7 mm

€29.90*

FG /Carson ball bearing set, shielded, set of 14

lager_0001 Version: y0121 For cars with alloy differential case+ 4.6EUR

Contains all bearings for the specified car.Complete ball bearing set for all FG touring / offroad 2WD cars (not Formula 1) and all Carson 2WD large scale cars (offroad and touring cars).Your choice of plastic or alloy diff case.The set includes:- wheel bearing, 8 pcs., 8x22x7 mm- clutch bell bearing, 2 pcs., 10x22x6 mm- layshaft bearing, 2 pcs., 10x19x7 mm- diff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

Variants from €26.20*

€30.80*

10411 FG Ball bearing set for F1

fg_10411 Version: 10411SL Sportsline, sealed

Genuine FG spare/option part. Suitable for Formula 1. The set contains all ball bearing which are necessary for one model.Contents:10411SL Sportsline:10411CO Competition:2x 8x16x6 mm4x 10x19x7 mm8x 8x22x72x 12x28x8 mm3x 8x16x5 mm4x 10x19x7 mm8x 8x22x7 mm2x 15x28x7 mm

€40.95*

y0464 Seal bearing set for the FG 4WD sportsline models, set

Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell5 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 12 x 28 x 8 mm - Differential6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 110,30 EUR

€74.90*

4411/15 FG ball bearing set for 1/5, 1/6 4WD, sealed, 23 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 6 x 15 x 5 mm2 pieces: 10 x 22 x 6 mm5 pieces: 10 x 19 x 7 mm8 pieces: 8 x 22 x 7 mm4 pieces: 12 x 28 x 8 mm2 pieces: 17 x 26 x 7 mm

€79.50*

4411/11 FG ball bearing set for Leopard 2 Competitio, sealed, 16 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm6 pieces: 8 x 22 x 7 mm2 pieces: 17 x 26 x 7 mm2 pieces: 15 x 28 x 7 mm

€57.95*

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set

lager_0002 Car: y19600-RS Version for plastic diff excepting F1

Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€69.90*

4411/16 FG ball bearing set for electro, sealed, 21 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 22 x 6 mm4 pieces: 6 x 15 x 5 mm3 pieces: 10 x 19 x 7 mm2 pieces: 17 x 26 x 7 mm4 pieces: 12 x 28 x 8 mm6 pieces: 8 x 22 x 7 mm

€50.90*

4411/14 FG ball bearing set for 1/6 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm8 pieces: 8 x 22 x 7 mm2 pieces: 9 x 22 x 6 mm2 pieces: 17 x 26 x 7 mm2 pieces: 12 x 28 x 8 mm

€47.50*

y0460 Ceramic - hybrid bearings kit for 4WD FG models, set

Full ceramic bearing rate on the deflection and tension pulley. Extremely robust with ceramic balls. The existing strain in the fully enclosed housing of the belt 4WD FG Sport Line as Competition models are the requirements regarding friction and high heat! Fits all FG 4WD Sportsline and Competition models.Contents: 4 pieces, size: 6 x 15 x 5 mm 3 pieces, dimensions: 10 x 19 x 7 mmRetail prices; 102,30 EUR !!!

€44.90*

y0098 Ceramic ball bearings, sealed, set

y0098 Set content: y0098/1 - set of 6

Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Available sets: Set consists 6 bearings, includes bearings for FG clutch bell, layshaft and differential (alloy case only!).Set includes:2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mmSet consists 14 bearings, includes all bearings from a standard FG-car (not Formula 1) with alloy differential.Set includes:8 pcs. 8x22x7 mm2 pcs. 10x22x6 mm2 pcs. 10x19x7 mm2 pcs. 15x28x7 mm

€92.30*

y4494/03 Sealed bearing f. ball raced servo saver

Seal bearings are robust and keep the dirt from the camps better out than ordinary bearings. This is suitable for the upper part of the servo savers. Bulk: 7 x 14 x 5 mm

€14.90*

4411/10 FG ball bearing set for EVO, sealed, 14 pcs.

Genuine FG spare/option part.Content:2 x layshaft bearing 10 x 19 x 72 x clutch bell bearing10 x 22 x 6 8 x wheel bearing 8 x 22 x 72 x aluminum differential bearing 15 x 28 x 7

€48.95*

4411/12 FG ball bearing set for Leopard 4 Competition, sealed, 23 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:4 pieces: 6 x 15 x 5 mm5 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm6 pieces: 8 x 22 x 7 mm2 pieces: 17 x 26 x 7 mm4 pieces: 15 x 28 x 7 mm

€79.95*

y0461 Ceramic - Hybrid bearings for FG 4WD front axle housing, 4 pcs.

Single spare parts to replacement number: y0460Ceramic ballbearing fits on the alloy and plastic front axle housing for all FG 4WD models.Dimensions: 6 x 15 x 5 mm

€19.90*

y0463 Seal bearing set for the FG 4WD competition models

Genuine HT spare/option part. Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use:4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell6 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 15 x 28 x 7 mm - Differentialv6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 116,25 EUR

€79.90*

Filter products

FG