Models 1/7 and smaller

Produkt Details Take high-speed street bashing performance to another level with the 1/7 scale ARRMA® INFRACTION™ 6S BLX 4WD RTR. Capable of 80+ MPH speeds out of the box over on-road, dirt, and oval tracks, it now includes a handbrake and Spektrum® Smart electronics. Key Features • Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) • Spektrum® Firma™ 150A Smart ESC • dBoots® Hoons™ all-road tires • RTR Completion Level includes everything needed besides batteries and a compatible charger In The Box • (1) 1/7 ARRMA® INFRACTION™ Resto Mod Street Bash 6S BLX 4WD RTR • (1) Spektrum® Firma™ 150A Smart ESC (installed) • (1) Spektrum® Firma™ 4074 2050Kv Brushless Motor (installed) • (1) ARRMA® ADS-15M Waterproof* Servo (installed) • (1) Spektrum® SPMS650 Waterproof* Brake Servo (installed) • (1) Spektrum® SR6110AT AVC Receiver (installed) • (1) Spektrum® DX3™ DSMR® Radio • (1) 1/7 INFRACTION 6S BLX V2 All-Road Manual Needed to Complete • (2) 2S or (2) 3S LiPo Batteries with EC5™ or IC5™ connector • (1) Compatible Battery Charger • (4) AA batteries for Transmitter Features • Spektrum® 3-Channel DX3™ 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control™) • Compatible with Spektrum® Dashboard™ app for iOS or Android • ARRMA® ADS-15M Waterproof* Steering Servo • Spektrum® SPMS650 Waterproof* Brake Servo • Spektrum® Firma™ 150A Smart ESC • Spektrum® Firma™ 4074 2050Kv Brushless Motor with Safe-D pinion gears • New electronics module • New mechanical handbrake feature • Fresh street body look with matte gloss effect designs • Tunable wing for customizing the downforce Full-width front splitter balances downforce distribution • Rear diffuser increases downforce and grip for cornering faster and with confidence • Adjustable front and rear body mounts • 3mm Plate, 6061-T6 anodized aluminum chassis • Center brace for maximum durability • Heavy-duty drivetrain with durable steel driveshafts throughout • High-speed center driveshaft support • Rubber-shielded bearings • All-metal diff outdrives and gearbox internals • Updated internal gears with new tooth profile for increased strength • Lower internal gear ratio to reduce the center line transmission RPM, reducing center drive shaft resonance and increasing drivetrain durability • Oil-filled, adjustable, anodized aluminum shocks • Black-anodized aluminum front and rear shock towers • Waterproof* receiver box • Large battery trays • 5-spoke wheels • Durable wheel hubs • dBoots® Hoons™ all-road tires • 2-year limited warranty (see manual for details) * For details on waterproof standards, please refer to the product instruction manuals Overview The ready-to-run INFRACTION™ 6S BLX 4WD 1/7 scale truck tops off a tough and powerful ARRMA® brushless platform with stunning style — ideal for intermediate-level drivers who are eager to experience street bashing at 80+ MPH speeds (achievable in optimum conditions using a 6S LiPo and the included speed pinion gear). Its Spektrum® DX3™ radio and Smart brushless power system components provide real-time telemetry that also helps you reach and maintain maximum performance. Another feature new to the INFRACTION™ 6S BLX 4WD is a handbrake. The chassis includes a module for a rear vented disc brake and a powerful Spektrum® SPMS650 brake servo. You control the handbrake from a convenient switch on the DX3™ transmitter for thrilling drifting, "hooning" and stunt action. With its 4X4 traction, you can run the INFRACTION™ 6S BLX 4WD on all roads, in all conditions — over loose gravel, asphalt, smooth dirt, and short grass, in the sun, rain, and ice — while enjoying fresh RESTO MOD looks. The street body arrives factory-finished with new matte gloss effect designs. The included tunable wing lets you customize the downforce just the way you want it. To further enhance the aerodynamics, the chassis includes a full-width front splitter that balances downforce distribution. A rear diffuser increases downforce and grip, enabling you to corner faster and with confidence. Mounted on realistic 5-spoke wheels, the four dBoots® Hoons™ all-road tires keep their grip on the surface to pour on speed or stop on a dime. Underneath those streamlined Street Bash looks is a chassis which proves to the world, once again, that ARRMA® builds the most durable bashers. The 6061-T6 anodized aluminum chassis houses a heavy-duty drivetrain with steel driveshafts, plus all-metal diff outdrives and gearbox internals. Updated internal gears feature a new tooth profile for increased strength. A lower internal gear ratio reduces the center line transmission RPM, reducing the center drive shaft resonance and increasing drivetrain durability. Chassis toughness is reinforced with a center brace. Bearings are rubber-shielded, and the adjustable, oil-filled, anodized aluminum shocks are mounted on strong, black-anodized aluminum shock towers. ARRMA® has equipped the ready-to-run INFRACTION™ 6S BLX 4WD with the 3-channel Spektrum® DX3™ radio and an SR6110AT receiver featuring AVC® (Active Vehicle Control™) technology for high-speed stability. A convenient voltage level indicator is built into the transmitter which lets you easily track on-board Smart battery power. The vehicle's brushless power system also features Spektrum® Firma™ Smart components, so it's easy to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Just download the Spektrum® Dashboard™ app for iOS or Android, available for free at the App Store or Google Play. STUNNING NEW BODY PRINTS Two new striking color schemes to choose between. Which one will you pick? ALL-ROAD AGGRESSION dBoots HOONS tires designed for extreme all-road action. Classic 5-spoke wheels. FULLY INTEGRATED AERO Integrated chassis and diffuser for slick underside airflow DYNAMIC DUO Front bumper protection and aerodynamic splitter HANDBRAKE MODULE Innovative ARRMA design - mechanical rear brake operated by a thumb switch on the transmitter SPEKTRUM BRAKE SERVO • Strong, plastic gears used throughout • Waterproof, dustproof case • 23 tooth output spline • Torque: 6kg-cm (84oz-in) @6V • Speed: 0.12sec/60deg @6V • Dimensions: 40x38x20mm (industry standard size) WELL SUPPORTED The included center driveshaft high-speed support set prevents vibrations and increases drivetrain durability HEAVY DUTY Tough A-arms and drivetrain components that keep you bashing for longer CAPTURED & SEALED Captured ball ends that will never pop off and hub nut o-rings. SAFE-D FIRST Input gears are keyed to the drive cups composite sleeves to fortify the retention of the drive cup set screw HAVING IT LARGE Large battery trays allow you to fit up to 7.09" (180mm) x 2.17" (55mm) x 2.76" (70mm) size batteries ARRMA ADS-15M SERVO Strong, metal gears used throughout Waterproof, dustproof case 25 tooth output spline Torque: 14kg-cm (194oz-in) @6V Speed: 0.16sec/60deg @6V Dimensions: 40x38x20mm (industry standard size) SPEKTRUM FIRMA ESC Waterproof, dustproof design 150A, 6S LiPo ready (3S, 4S, & 6S compatible) Spektrum Smart Technology Fitted with reliable IC5 connectors (EC5 compatible) Integrated fan for reduced heat during extreme running High Quality 10awg wires Low voltage cut-off and thermal overload protection User programmable punch, brake, BEC, LVC sensitivity, reverse speed, and motor timing settings SPEKTRUM FIRMA MOTOR 2050Kv 4074 size 6S brushless motor Beautifully etched aluminum can 4-pole construction for smooth, consistent power 4mm gold bullet connectors for reliable and efficient connection Black anodized aluminum motor can for increased heat dissipation Super strong 5mm shaft Groove at the end of the motor shaft allows the installation of a pinion retaining E-clip SPEKTRUM DX3 RADIO & SR6110AT AVC RECEIVERErgonomic steering wheel for precise control On-the-fly adjustable AVC gain for personalized handling Lightweight and ergonomic design for long bashing 3 channel radio system 2.4GHz connection built around DSMR technology Full-range telemetry capabilities Produkt FeaturesBattery Sold Separately Connector Type IC5 Ground Clearance 0.59" (15mm) Internal Gear Ratio 2.8:1 Motor Size Firma™ 4074 2050Kv Brushless Motor Product Length 27.36" (695 mm) Spur Gear 46T Suspension Independent Ball Bearings Full set Chassis 0.12 in (3mm) Plate, 6061-T6 Aluminum Completion Level Ready-To-Run Drivetrain 4WDDrive Type Forward/Brake/Reverse Product Height 7.87" (200 mm) Top Speed 80+ Wheel Hex Size 17mm Bushing Material Metal Charger Sold Separately Differential Three oil-filled metal gear Max Battery Dimensions 5.5 x 1.85 x 1.5" (140 x 47 x 38mm) Receiver Included Shock Type 3.03 in (77mm) FR, 3.43 in (87mm) RR. aluminum body, oil-filled Power Type Electric Product Weight 11lb (5kg) Tire Tread Hoons Vehicle Type On-Road Water-Resistant Yes Battery Tray Dimensions 5.45 x 1.83 x 1.38 in (138.5 x 46.5 x 35mm) Front Track 12.13" (308mm) Power System 6S Product Width 12.2" (310 mm) Radio Included Technology AVC SMART Body INFRACTION, Screen printed, Decaled, Trimmed Brakes Integral with ESC / Metal Disk with Pads (Hand Brake) Pinion 15T Scale 1/7 Final Drive Ratio 8.58:1 Motor Type Brushless Rear Track 12.01 in (305mm) Speed Control Included Wheelbase 15.98 in (406mm) Gear Pitch 1.0MOD Servos Included

The performance, style, and value of the SCX24 Jeep Wrangler JLU are now even better than before. Oil-filled shocks, Spektrum electronics, and new body colors have been added for exciting indoor and outdoor adventuring that everyone can enjoy.Detailed Jeep Wrangler JLU polycarbonate body in two new color optionsNew oil-filled shocksDurable metal chassisSpektrum SLT2 2.4GHz radio systemSpektrum 350mAh LiPo battery and USB chargerIn The Box(1) 1/24 SCX24 Jeep Wrangler JLU 4X4 Rock Crawler Brushed RTR(1) Spektrum SLT2 2.4GHz radio system(1) Spektrum 10A Brushed ESC / SLT Receiver Combo(1) Spektrum 350mAh LiPo Battery and USB Charger(1) Dynamite 88T Brushed Motor(1) Axial AS-1 Micro Servo(4) AA Transmitter Batteries(1) SCX24 Jeep Wrangler JLU 4X4 Product ManualNeeded to Complete(1) Absolutely nothingFeaturesDetailed Jeep Wrangler JLU polycarbonate body in two new color optionsNew oil-filled shocksDurable metal chassisSpektrum SLT2 2.4GHz radio systemSpektrum 350mAh LiPo battery and USB chargerLicensed KMC Machete WheelsLicensed Nitto Trail Grappler M/T tiresTwo LED lights in the front bumper030-size brushed motorStrong, realistic steel frame railsTrue, full-time 4-wheel driveWorm drive gear on front and rear axles3-Link front and 4-link rear suspensionFully equipped and ready-to-runOverviewNo matter where you are, the Axial SCX24 Jeep Wrangler JLU makes it the scene for rock crawling fun. If you’re stuck at work, go crawling on your desk. A messy room becomes a challenging obstacle course. Take your rig outside and set up an exciting trail with a few holes, rocks, and twigs.Just like the full-size Jeeps that embody adventure, the 1/24 scale SCX24 Jeep JLU is ideal for tackling almost any terrain, indoors or outdoors — and looks great while doing it. It’s completely assembled, fully equipped, and a perfect choice for hobby beginners as well as for experienced Axial RC crawling enthusiasts.One of the most successful micro rock crawlers of all time, the SCX24 Jeep JLU is also one of the best values in RC. Now, Axial has updated the popular rig to make it even better. Plush oil-filled shocks have been added for a suspension that smoothly absorbs bumps and stays stable over the roughest terrain. Reliable Spektrum electronics are included, and there are two hot new body colors to choose from.And it still has all the performance advantages of the proven Axial SCX24 platform. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase the ground clearance. Realistic steel frame rails on the C-channel chassis stand up to hard knocks.The SCX24 Jeep JLU performs like a winner and looks like one, too. The realistic scale body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. Two LEDs in the front bumper light up the trail for night-time crawling. For quick battery access, just remove one clip to tilt back the body.Inside the box, in addition to the assembled and finished rig, you’ll find a Spektrum 2.4GHz transmitter, 350mAh LiPo battery, and handy USB charger. Four AA batteries are even included for the transmitter. The SCX24 Jeep Wrangler JLU is the complete micro rock crawling package. Think small, and get ready for big Axial adventures! JEEP WRANGLER JLU BODYLike the full-size Jeep Wrangler JLU, the Axial SCX24 Jeep Wrangler JLU embodies adventure. Its detailed scale body comes factory-finished in two new color options. For quick battery access, just remove one clip to tilt back the body.  WORM GEARSThe front and rear differentials house metal worm gears for durability, increased ground clearance, and strong drag brakes.  STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned.  FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a 3-link front and 4-link rear setup.  4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist.  OIL-FILLED SHOCKSNew oil-filled shocks allow the suspension to articulate smoothly over rough terrain. You can adjust the preload with 1mm, 2mm, and 4mm spacers to fine-tune your rig for your handling needs.  DURABLE STEEL AXLESSteel front and rear axles, front stub axles, and dogbones provide the strength and durability needed to keep going during tough climbs and over rough trails.  SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.  DYNAMITE BRUSHED MOTORThe included Dynamite 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears.  SPEKTRUM SLT2 2.4GHz RADIO SYSTEMThe Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The ready-to-run package is so complete, even AA transmitter batteries are included.  FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here. The drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle. 

Product information The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system. About the Model • This is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm. • The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.• The TT-02 is a highly versatile and easy-to-maintain chassis. • Separate parts are included to recreate dynamic rear wing and unique door mirrors. • Comes with black 10-spoke wheels. • Includes body markings and masking stickers for use when painting the model. • A wide range of option parts is available to tune and customize TT-02 Chassis cars. • Please note that R/C equipment and battery pack are separately required. Technical details:- 1/10 scale kit model - Wheelbase 257mm - Detailed polycarbonate body (includes window masking film for painting) - Robust TT-02 chassis - 4WD shaft drive with protected drive train - Incl. electronic speed controller - Powerful 540 Torque Tuned motor Attention: Not suitable for children under 14 years.

Product Details Push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Unique 4WS modes, extreme articulation, oversize tires, and more let you crawl over bigger obstacles and pull tougher lines than any other 1/24 scale rig. Key Features Three 4-wheel steering (4WS) modes give all drivers new terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. Rockster wheels and Rock Lizards tires produce trail-taming traction. Fully equipped — you can hit the trails almost immediately! In The Box (1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler (1) Spektrum SLT3 2.4GHz 3-Channel Radio System (2) Axial AS-1 Servo (1) Spektrum 2-in-1 ESC/Receiver Combo (1) 0.5 Amp USB Charger (1) Dynamite 88T Brushed Electric Motor (1) Dynamite 350mAh 2S 7.4V LiPo (4) AA Transmitter Batteries (1) Miscellaneous Tools (1) 1/24 AX24 XC-1 4WS Manual Needed to Complete Nothing! Everything you need to begin having fun with the 1/24 AX24 XC-1 4WS Crawler is included! Features Three 4-wheel steering (4WS) modes give drivers new terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. Long travel coilover shocks keep wheels on the ground to maximize traction. 4-Link front and rear suspension reduces axle steer and torque twist. Front and rear lockers with worm gear setup increase ground clearance. Steel front and rear axles, stub axles, and dog bones provide strength. Splined and sleeved drive shafts increase suspension travel. Hinged body system offers easy access to on-board components. Rockster wheels and Rock Lizards tires produce trail-taming traction. No bushings — entire vehicle features sealed bearings. Dynamite 88T motor provides the torque to conquer steep climbs. Fully equipped — you can hit the trails almost immediately! Overview Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails toward destinations far removed from the modern world. Their journey's end will reward them with beautiful views that only a select few ever see. But the best memories are made during the journey itself.Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if most people would have trouble getting through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pushed to new limits. The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger obstacles and pull tougher lines than you can with any other 1/24 scale rig. The new AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to maneuver over or around almost anything in your way. This system gives all drivers new terrain conquering ability! In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires. The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger obstacles than our SCX24 platform rigs). Newcomers will find it to be a fun and highly capable mini crawler to run on indoor or outdoor courses. It's also a great way for full-scale off roading enthusiasts to exercise and refine their skills. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully assembled and equipped, you can start today. FOUR-WHEEL STEERING (4WS) The unique AX24 4-wheel steering system gives all drivers new terrain conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to maneuver over or around anything in your way. SIDE PLATE CHASSIS The durable side plate chassis is engineered to allow high clearance and generous articulation. Angled rock sliders also help you maneuver past rocks, roots, ledges, and other large obstacles. Driving the AX24 XC-1, you go where you want to go! LED LIGHTS LED rock lights mounted in the rock sliders keep your path visible in low light. You'll be able to see and surmount obstacles you might not otherwise spot. Day or night, the AX24 XC-1 keeps your adventure alive. COILOVER SHOCK ABSORBERS Longer, 51mm coilover shocks are new for the AX24 platform. Mounted at a lay back angle in the side plate chassis, they allow increased articulation to keep the wheels on the ground and maximizing traction over uneven surfaces. 4-LINK FRONT AND REAR SUSPENSION The suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and reduce axle steer and torque twist. WORM GEARS The front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance. DURABLE STEEL AXLES Steel front and rear axles, stub axles and dog bones provide the strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTS The drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.HINGED BODY SYSTEM The hinged body system provides fast, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up. ROCKSTER WHEELS & ROCK LIZARDS TIRES In 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.FULL BALL BEARINGS Although the AX24 is smaller than many other Axial RC crawlers, it still measures up to our highest quality standards. For example, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the entire vehicle. AXIAL AS-1 SERVOS Axial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while protecting the servo gears in the event of a bind or impact.DYNAMITE 88T BRUSHED MOTOR The Dynamite 88T brushed electric motor provides the right amount of torque to conquer steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the gears. IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of multiple other rigs without worrying about interference. A new throttle port serves as an ESC bypass for using aftermarket ESCs without having to buy a new receiver. Product Specifications Tire Tread Axial Rock Lizards Vehicle Type Rock Crawler Charger Included Differential Worm Gear 16T/4T Receiver Included Shock Type Coil-over 1.35-2.0 in (35-51mm), Plastic Power Type Electric Servos Included Front Track 4.5 in (113mm) Product Width 4.5" (114 mm) Radio Included Motor Type Brushed Rear Track 4.5 in (113mm) Speed Control Included Wheelbase 5.3" (135 mm) Battery Included Connector Type PH 2.0 (High-Current Ultra Micro) Ground Clearance 1.3" (34mm) Product Length 7.8" (198 mm) Spur Gear 55T Steering Type 4WS Suspension Solid Axle, Front and Rear Wheel Width 0.5 in (12.5mm) Body XC-1 Screened Brakes Integral with ESC Pinion 11T Scale 1/24 Ball Bearings Complete Vehicle Chassis Side Plate Completion Level Ready-To-Run Drivetrain 4WD Drive Type Forward/Brake/Reverse Product Height 3.7" (94 mm)

Product details Overcome obstacles and conquer new trails with the Axial AX24 XC-1 Rock Crawler RTR. Unique 4WS modes, extreme articulation, oversized tyres and more let you crawl over bigger obstacles and conquer tougher tracks than any other 1:24 scale car. Key Features Three 4-wheel steering modes (4WS) give the driver new ways to conquer any terrain. The sideplate chassis allows greater articulation for improved handling in rough terrain. LED rock lights mounted in the rock sliders ensure that your path is clearly visible in low light. Rockster rims and Rock Lizards tyres provide ground-breaking traction. Fully equipped - you can hit the trails almost immediately! In The Box(1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler(1) Spektrum SLT3 2.4GHz 3-Channel Radio System(2) Axial AS-1 Servo(1) Spektrum 2-in-1 ESC/Receiver Combo(1) 0.5 Amp USB Charger(1) Dynamite 88T Brushed Electric Motor(1) Dynamite 350mAh 2S 7.4V LiPo(4) AA Transmitter Batteries(1) Miscellaneous Tools(1) 1/24 AX24 XC-1 4WS Manual Needed to CompleteNothing! Everything you need to begin having fun with the 1/24 AX24 XC-1 4WS Crawler is included!FeaturesThree 4-wheel steering (4WS) modes give drivers new terrain conquering ability.Side plate chassis allows greater articulation for improved handling over rough terrain.LED rock lights mounted in the rock sliders keep your path visible in low light.Long travel coilover shocks keep wheels on the ground to maximize traction.4-Link front and rear suspension reduces axle steer and torque twist.Front and rear lockers with worm gear setup increase ground clearance.Steel front and rear axles, stub axles, and dog bones provide strength.Splined and sleeved drive shafts increase suspension travel.Hinged body system offers easy access to on-board components.Rockster wheels and Rock Lizards tires produce trail-taming traction.No bushings — entire vehicle features sealed bearings.Dynamite 88T motor provides the torque to conquer steep climbs.Fully equipped — you can hit the trails almost immediately!OverviewEvery weekend, groups of off-road rock crawling enthusiasts gather to follow trails toward destinations far removed from the modern world. Their journey's end will reward them with beautiful views that only a select few ever see. But the best memories are made during the journey itself.Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if most people would have trouble getting through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pushed to new limits.The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger obstacles and pull tougher lines than you can with any other 1/24 scale rig.The new AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain.Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to maneuver over or around almost anything in your way. This system gives all drivers new terrain conquering ability!In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger obstacles than our SCX24 platform rigs). Newcomers will find it to be a fun and highly capable mini crawler to run on indoor or outdoor courses. It's also a great way for full-scale off roading enthusiasts to exercise and refine their skills.Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully assembled and equipped, you can start today.   FOUR-WHEEL STEERING (4WS)The unique AX24 4-wheel steering system gives all drivers new terrain conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to maneuver over or around anything in your way.  SIDE PLATE CHASSISThe durable side plate chassis is engineered to allow high clearance and generous articulation. Angled rock sliders also help you maneuver past rocks, roots, ledges, and other large obstacles. Driving the AX24 XC-1, you go where you want to go!  LED LIGHTSLED rock lights mounted in the rock sliders keep your path visible in low light. You'll be able to see and surmount obstacles you might not otherwise spot. Day or night, the AX24 XC-1 keeps your adventure alive.  COILOVER SHOCK ABSORBERSLonger, 51mm coilover shocks are new for the AX24 platform. Mounted at a lay back angle in the side plate chassis, they allow increased articulation to keep the wheels on the ground and maximizing traction over uneven surfaces.  4-LINK FRONT AND REAR SUSPENSIONThe suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and reduce axle steer and torque twist.  WORM GEARSThe front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance.  DURABLE STEEL AXLESSteel front and rear axles, stub axles and dog bones provide the strength and durability needed to keep running with confidence during tough climbs and over rough trails.  SPLINED DRIVE SHAFTSThe drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.  HINGED BODY SYSTEMThe hinged body system provides fast, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.  ROCKSTER WHEELS & ROCK LIZARDS TIRESIn 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.  FULL BALL BEARINGSAlthough the AX24 is smaller than many other Axial RC crawlers, it still measures up to our highest quality standards. For example, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the entire vehicle.  AXIAL AS-1 SERVOSAxial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while protecting the servo gears in the event of a bind or impact.  DYNAMITE 88T BRUSHED MOTORThe Dynamite 88T brushed electric motor provides the right amount of torque to conquer steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the gears.  IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEMThe included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of multiple other rigs without worrying about interference. A new throttle port serves as an ESC bypass for using aftermarket ESCs without having to buy a new receiver.   Product SpecificationsMotor TypeBrushedRear Track4.5 in (113mm)Speed ControlIncludedWheelbase5.3" (135 mm)Power TypeElectricServosIncludedBodyXC-1 ScreenedBrakesIntegral with ESCPinion11TScale1/24Ball BearingsComplete VehicleChassisSide PlateCompletion LevelReady-To-RunDrivetrain4WDDrive TypeForward/Brake/ReverseProduct Height3.7" (94 mm)BatteryIncludedConnector TypePH 2.0 (High-Current Ultra Micro)Ground Clearance1.3" (34mm)Product Length7.8" (198 mm)Spur Gear55TSteering Type4WSSuspensionSolid Axle, Front and RearWheel Width0.5 in (12.5mm)Tire TreadAxial Rock LizardsVehicle TypeRock CrawlerFront Track4.5 in (113mm)Product Width4.5" (114 mm)RadioIncludedChargerIncludedDifferentialWorm Gear 16T/4TReceiverIncludedShock TypeCoil-over 1.35-2.0 in (35-51mm), Plastic

Product DetailsAxial® reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24™ platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, it’s a must for Ford fans and RC enthusiasts of all ages!Key FeaturesFactory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and “AA” transmitter batteries includedOffcially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tireBonus second decal sheet for optional customizationNitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheelsWorking lights in front, with molded lenses on all four corners of the body In The Box(1) Axial® SCX24™ Ford Bronco 1/24 Scale 4WD RTR(1) Horizon Hobby® 2.4GHz 3-Channel Radio System(1) Axial® AS-1 Micro Servo(1) Horizon Hobby® ESC/Receiver Combo(1) Dynamite® USB LiPo Charger(1) Dynamite® 88T 030-Size Brushed Electric Motor With Pinion(1) Dynamite® 350mAh 2S 30C 7.4V LiPo Battery(4) AA Batteries for Transmitter(2) Decal Sheets(1) 1/24 SCX24 2021 Ford Bronco 4WD Manual Needed to CompleteNothing — everything is included in the box!FeaturesFactory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries includedOfficially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tireBonus second decal sheet for optional customizationNitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheelsWorking lights in front, with molded lenses on all four corners of the bodyTrue full-time 4-wheel driveDurable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performanceWorm drive gears in front and rear differentials increase ground clearanceSturdy steel C-channel frame rails with bracing for added strength and proper alignmentDurable steel axles provide strength and durability to match tough climbs and rough trails2-Year limited warranty (see product manual for details)Axial® Scales New Peaks in SCX24™ Realism!The first sport utility vehicle developed by Ford Motor Company, the Bronco enjoyed an uninterrupted production run that lasted five generations from 1966 through 1996. After a short absence, it returned to the Ford lineup in 2021 — and this new generation has quickly re-established the Bronco as one of the auto industry's premier "go-to" off-road vehicles.Now every auto enthusiast who admires the full-size Bronco can own and drive their own officially licensed, 1/24 scale RC version: the Axial® SCX24™ Ford Bronco 4WD RTR.No previous radio control experience is needed because it's easy to drive, fully assembled, and ready-to-run. The truck is built on the proven Axial® SCX24™ chassis, so even the most dedicated RC crawling fan will be proud to have it in their lineup. And serious scale modelers will be excited to find that this Ford Bronco not only looks great and performs well, but also brings a whole new level of scale realism to the SCX24™ platform.With the SCX24™ Ford Bronco, Axial® introduces an exceptionally detailed and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. Complementing the detail of the scale Ford Bronco body, Axial® includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.The SCX24™ Ford Bronco 4WD makes any spot the perfect setting for RC adventures. If you're stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Test your skills on an indoor "crawl course table" or take your SCX24™ Ford Bronco outdoors, where its water-resistant electronics are safe from the elements. You can set up an exciting trail in minutes with a few holes, twigs, and rocks.Whatever course you follow, the SCX24™ chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite® 88T 030-size motor and 2S LiPo battery. A 3-channel 2.4GHz radio system is included for precise, dependable control.The Ford Bronco comes complete with everything needed to hit the trails right out of the box — transmitter, receiver, ESC, motor, servo, batteries, and USB charger. The authentic scale body is available in three color options based on current Ford Bronco factory colors. Enjoy the view from the peak of 1/24 scale realism with the Axial® SCX24™ Ford Bronco 4WD!     DETAILED SCALE FORD BRONCO HARD BODYThe Axial® SCX24 Ford Bronco achieves a whole new level of scale realism with its officially licensed, exceptionally detailed, and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish.  STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned.  DYNAMITE® BRUSHED MOTORThe included Dynamite® 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears.  WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.  FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.  DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails.  SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.  COILOVER SHOCK ABSORBERSEven at this small scale, the combination of coilover shocks with simulated reservoirs and durable composite suspension links delivers the crawling performance you expect from an Axial® vehicle.  LIGHTS AND MOLDED LENSESFor maximum realism, working lights are included on the front corners of the scale Ford Bronco body and in the front bumper. All four corners of the body feature molded lenses.  4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist.  FACTORY FORD WILDTRAK WHEELS & NITTO TRAIL GRAPPLER M/T TIRESComplementing the exceptional detail of the scale hard body, Axial® has outfitted the SCX24™ Ford Bronco with officially licensed Wildtrak wheels and Nitto Trail Grappler M/T tires. They offer a fantastic blend of off-road performance while retaining excellent composure for on-road use.  HINGED BODY SYSTEMThe hinged body system provides easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up.  FULL BALL BEARINGSJust because the SCX24™ is small doesn't mean its features follow suit. There are no bushings here — the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.  AXIAL® AS-1 SERVOMounted just above the front axle is the Axial® AS-1 servo, with a servo saver that allows for steering accuracy while protecting the servo gears in the event of a bind or impact.   Product SpecificationsReceiverIncludedShock TypeCoil-Over .9-1.3 in (24-33.4mm), CompositeBushing MaterialPlasticChargerIncludedDifferentialWorm Gear 16T/4TPower TypeElectricServosIncludedFront Track3.938 in (100.0mm)Inner Tire / Outer Wheel Diameter1.0 inProduct Width3.875" (98 mm)RadioIncludedBodyAxial® Ford Bronco Hard BodyPinion10TScale1/24BatteryIncludedConnector TypePH 2.0 (High-Current Ultra Micro)Motor Size030 Brushed Electric MotorProduct Length8.75" (222 mm)Spur Gear55TSteering Type2WSSuspensionSolid Axle, Front and RearBall BearingsFullChassisStamped Steel Chassis RailsCompletion LevelReady-To-RunDrivetrain4WDDrive TypeForward/Brake/ReverseMakeFordProduct Height4.625" (117 mm)Tire TreadNitto Trail Grappler M/T TiresVehicle TypeRock CrawlerMotor TypeBrushedRear Track3.938 in (100.0mm)Speed ControlIncludedWheelbase5.19" (132 mm)

The Mercedes-AMG GT-3 is another model in the large GT-3 series on a TT-02 chassis. The original was used on the race tracks in the GT-3 class in 2016. It has a 6.3 litre V8 engine. This vehicle took 4th place in the 24-hour race at the Nürburgring. 4WD kit model, TT-02 chassis, electr. Speed controller, 540 torque tuned motor, polycarbonate bodyshell with add-on parts, cardan drive, struts, independent suspension, slick tyres, tub frame chassis, instructions Warnings: Read and understand all instructions before starting assembly. If a child is assembling the model, a supervising adult should also have read the instructions. Tools including knives are used when assembling the kit. Special care should be taken to avoid injury. If difficulties arise during assembly, ask an adult to supervise the work or a modeller with RC experience or a specialist dealer. Only use tools for their intended purpose. There is a risk of injury if used incorrectly. If you use paint and/or glue (not included in the kit), observe and follow the instructions supplied with the kit. Keep the kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads.  Caution! Not suitable for children under 14 years of age. Product details Technical details: - 1:10 scale kit model - encapsulated 4WD all-wheel drive - prototypical, transparent Mercedes-Benz AMGGT-3 polycarbonate body - Powerful 540 electric motor- Independent front and rear suspension- New colour for the body: PS-63 Bright Gun metal(300086063). To achieve a matt finish, applyPS-55 must be sprayed onto the outside of the body. - Electronic speed control- Many optional tuning parts available

Axial® reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages! Product Details Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries includedOffcially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tireBonus second decal sheet for optional customizationNitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheelsWorking lights in front, with molded lenses on all four corners of the body Features Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Axial® Scales New Peaks in SCX24 Realism!The first sport utility vehicle developed by Ford Motor Company, the Bronco enjoyed an uninterrupted production run that lasted five generations from 1966 through 1996. After a short absence, it returned to the Ford lineup in 2021 and this new generation has quickly re-established the Bronco as one of the auto industry's premier "go-to" off-road vehicles.Now every auto enthusiast who admires the full-size Bronco can own and drive their own officially licensed, 1/24 scale RC version: the Axial® SCX24 Ford Bronco 4WD RTR.No previous radio control experience is needed because it's easy to drive, fully assembled, and ready-to-run. The truck is built on the proven Axial® SCX24 chassis, so even the most dedicated RC crawling fan will be proud to have it in their lineup. And serious scale modelers will be excited to find that this Ford Bronco not only looks great and performs well, but also brings a whole new level of scale realism to the SCX24 platform.With the SCX24 Ford Bronco, Axial® introduces an exceptionally detailed and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. Complementing the detail of the scale Ford Bronco body, Axial® includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.The SCX24 Ford Bronco 4WD makes any spot the perfect setting for RC adventures. If you're stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Test your skills on an indoor "crawl course table" or take your SCX24 Ford Bronco outdoors, where its water-resistant electronics are safe from the elements. You can set up an exciting trail in minutes with a few holes, twigs, and rocks.Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite® 88T 030-size motor and 2S LiPo battery. A 3-channel 2.4GHz radio system is included for precise, dependable control.The Ford Bronco comes complete with everything needed to hit the trails right out of the box transmitter, receiver, ESC, motor, servo, batteries, and USB charger. The authentic scale body is available in three color options based on current Ford Bronco factory colors. Enjoy the view from the peak of 1/24 scale realism with the Axial® SCX24 Ford Bronco 4WD! DETAILED SCALE FORD BRONCO HARD BODYThe Axial® SCX24 Ford Bronco achieves a whole new level of scale realism with its officially licensed, exceptionally detailed, and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned. DYNAMITE® BRUSHED MOTORThe included Dynamite® 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears. WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance. FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup. DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels. COILOVER SHOCK ABSORBERSEven at this small scale, the combination of coilover shocks with simulated reservoirs and durable composite suspension links delivers the crawling performance you expect from an Axial® vehicle.. LIGHTS AND MOLDED LENSESFor maximum realism, working lights are included on the front corners of the scale Ford Bronco body and in the front bumper. All four corners of the body feature molded lenses. 4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist. FACTORY FORD WILDTRAK WHEELS & NITTO TRAIL GRAPPLER M/T TIRESComplementing the exceptional detail of the scale hard body, Axial® has outfitted the SCX24 Ford Bronco with officially licensed Wildtrak wheels and Nitto Trail Grappler M/T tires. They offer a fantastic blend of off-road performance while retaining excellent composure for on-road use. HINGED BODY SYSTEMThe hinged body system provides easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up. FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle. AXIAL® AS-1 SERVOMounted just above the front axle is the Axial® AS-1 servo, with a servo saver that allows for steering accuracy while protecting the servo gears in the event of a bind or impact.

Axial® reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages! Product Details Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries includedOffcially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tireBonus second decal sheet for optional customizationNitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheelsWorking lights in front, with molded lenses on all four corners of the body Features Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Axial® Scales New Peaks in SCX24 Realism!The first sport utility vehicle developed by Ford Motor Company, the Bronco enjoyed an uninterrupted production run that lasted five generations from 1966 through 1996. After a short absence, it returned to the Ford lineup in 2021 and this new generation has quickly re-established the Bronco as one of the auto industry's premier "go-to" off-road vehicles.Now every auto enthusiast who admires the full-size Bronco can own and drive their own officially licensed, 1/24 scale RC version: the Axial® SCX24 Ford Bronco 4WD RTR.No previous radio control experience is needed because it's easy to drive, fully assembled, and ready-to-run. The truck is built on the proven Axial® SCX24 chassis, so even the most dedicated RC crawling fan will be proud to have it in their lineup. And serious scale modelers will be excited to find that this Ford Bronco not only looks great and performs well, but also brings a whole new level of scale realism to the SCX24 platform.With the SCX24 Ford Bronco, Axial® introduces an exceptionally detailed and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. Complementing the detail of the scale Ford Bronco body, Axial® includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.The SCX24 Ford Bronco 4WD makes any spot the perfect setting for RC adventures. If you're stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Test your skills on an indoor "crawl course table" or take your SCX24 Ford Bronco outdoors, where its water-resistant electronics are safe from the elements. You can set up an exciting trail in minutes with a few holes, twigs, and rocks.Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite® 88T 030-size motor and 2S LiPo battery. A 3-channel 2.4GHz radio system is included for precise, dependable control.The Ford Bronco comes complete with everything needed to hit the trails right out of the box transmitter, receiver, ESC, motor, servo, batteries, and USB charger. The authentic scale body is available in three color options based on current Ford Bronco factory colors. Enjoy the view from the peak of 1/24 scale realism with the Axial® SCX24 Ford Bronco 4WD! DETAILED SCALE FORD BRONCO HARD BODYThe Axial® SCX24 Ford Bronco achieves a whole new level of scale realism with its officially licensed, exceptionally detailed, and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned. DYNAMITE® BRUSHED MOTORThe included Dynamite® 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears. WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance. FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup. DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels. COILOVER SHOCK ABSORBERSEven at this small scale, the combination of coilover shocks with simulated reservoirs and durable composite suspension links delivers the crawling performance you expect from an Axial® vehicle.. LIGHTS AND MOLDED LENSESFor maximum realism, working lights are included on the front corners of the scale Ford Bronco body and in the front bumper. All four corners of the body feature molded lenses. 4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist. FACTORY FORD WILDTRAK WHEELS & NITTO TRAIL GRAPPLER M/T TIRESComplementing the exceptional detail of the scale hard body, Axial® has outfitted the SCX24 Ford Bronco with officially licensed Wildtrak wheels and Nitto Trail Grappler M/T tires. They offer a fantastic blend of off-road performance while retaining excellent composure for on-road use. HINGED BODY SYSTEMThe hinged body system provides easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up. FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle. AXIAL® AS-1 SERVOMounted just above the front axle is the Axial® AS-1 servo, with a servo saver that allows for steering accuracy while protecting the servo gears in the event of a bind or impact.

The CARSON Virus 4.1 Brushless is the innovative 4WD buggy with a race chassis optimized for off-road slopes and a powerful brushless drive. To protect the steering servo from moisture, the housing was sealed. The robust 3 mm aluminum chassis is extra narrow and has a chassis brace at the front and rear. Solid wishbones and all-round dirt deflectors ensure long-lasting driving pleasure. The 2100 kV HOBBYWING brushless motor provides the all-wheel drive with plenty of power and accelerates the 4.1 to over 80 km/h. Big bore aluminum oil pressure dampers, the low center of gravity and numerous setup options ensure perfect traction and allow the CARSON Virus 4.1 Brushless to fly over all distances.Ready-to-drive model with decorated body, waterproof brushless drive up to 4S LiPo, 2.4 GHz RC system + 9 kg metal gear servo, 2x7.4V/3000 mAh LiPo driving battery, transmitter batteries, LiPo Compact 2 charger with balancer, instructions. Technical details: 3 differentials Extra narrow 3mm aluminum chassis 2.4 GHz RC system including failsafe 100 A HOBBYWING brushless set 4S 9kg servo with metal gearsTechnical data: Scale 1:8 Length 500 mm Width 315 mm Height 220 mm Wheelbase 340 mm Ground clearance 35 mm Weight 3072 g 4WD drive ball bearings Speed up to 80 km/h

The SCX24 1940s Dodge Power Wagon delivers strong trail performance at a great value. It has the looks of the full-size classic and brings new features to the SCX24 platform, including smooth oil-filled shocks and high-performance Pro-Line wheels and tires. Key Features Detailed Power Wagon 4-door molded ABS hard body Oil-filled shocks Pro-Line Interco Super Swamper tires Pro-Line Impulse Bead-Loc wheels Overlanding rack and accessories Needed to Complete Nothing! Everything you need to begin having fun with the SCX24 Dodge Power Wagon is included! Features Fully equipped and ready-to-run Assembled SCX24 chassis, drivetrain, and suspension Detailed Power Wagon 4-door molded ABS hard body Pro-Line Interco Super Swamper tires Pro-Line Impulse Bead-Loc wheels Oil-filled shocks Overlanding rack and accessories Spektrum SLT2 2.4GHz radio system 88-Turn brushed motor Spektrum 350mAh LiPo battery and USB charger Overview The innovative Dodge Power Wagon played a pivotal role in building America. Mass-produced rear wheel drive vehicles before WWII were less than ideal for demanding farm and construction work. During the war, battlefield soldiers used the 4x4 Power Wagon to move supplies and wounded troops. They discovered how valuable these trucks were and created demand that Dodge began meeting with civilian models in the mid-1940s. The Axial SCX24 1940s Dodge Power Wagon offers a unique take on this off-road classic, as a custom 4-door RC crawler built on the proven, go-anywhere SCX24 platform. It's an essential addition to any Axial fan's collection of SCX24 rigs, and the perfect choice for everyone who wants performance and value in an RC crawler. If you're a full-size classic auto enthusiast who's new to RC, you too will be thrilled by this rig's 1/24 scale accuracy and ready-to-run simplicity. Fully assembled and fully equipped, the Power Wagon tops off its muscular chassis with a molded ABS hard body in a custom 4-door design that's loaded with detail. An overlanding rack and accessories, included for optional installation, add to the realism. It looks ready to take on the wilderness and it is! The SCX24 Power Wagon has been engineered for unstoppable RC crawling whether indoors at home or outdoors on the trails. Axial improved the already proven SCX24 platform with several significant performance upgrades. Oil-filled shocks create a suspension system that smoothly absorbs bumps and remains stable over the roughest terrain. Pro-Line Interco Super Swamper tires on Pro-Line Impulse Bead-Loc wheels add the grip and clearance to conquer any challenge in your chosen line. Everything you'll need is included in the box a Spektrum SLT2 2.4GHz radio, Spektrum 350mAh 2S 30C 7.4V LiPo battery, handy Spektrum USB LiPo charger, and even four AA batteries for the transmitter. The value and performance make the SCX24 1940s Dodge Power Wagon an ideal RC rock crawler for anyone who's eager to hit the trails with a classic American truck. OFFICIALLY LICENSED 1940s DODGE POWER WAGON HARD BODYThe Power Wagon offers the high level of scale detail possible only with a molded ABS hard body. You can add to its realism by installing the included overlanding rack and accessories. OFFICIALLY LICENSED INTERCO SUPER SWAMPER PRO-LINE TIRES & IMPULSE BEAD-LOC WHEELSIncluded Pro-Line Super Swamper high performance tires mounted on easy-to-use, 3-piece Pro-Line Impulse beadlock wheels provide scale looks and superior traction. OIL-FILLED SHOCKSOil-filled shocks allow the suspension to articulate smoothly over rough terrain. You can adjust the preload to fine-tune your rig for your handling needs. SPEKTRUM SLT2 2.4GHz RADIO SYSTEMThe Spektrum SLT2 2-channel radio system offers high-end features such as throttle/steering travel adjust and throttle limiting. The RTR package is so complete, even AA transmitter batteries are included. STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned. DYNAMITE BRUSHED MOTORThe included Dynamite 88T brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears. WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance. FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup. DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels. 4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist. FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle.

Awarded the spiel gut® seal of approval for particularly good and long-lasting toys.With the Neo Fighter, TAMIYA presents the successor to the absolute bestseller among the 2WD RC buggies, the legendary Super Fighter G. This new entry-level racer offers optimal conditions for driving fun on any terrain. The model is particularly impressive in terms of quality and robustness, as it is also the standard model for the TAMIYA FIGHTER-CUP, the world's largest RC youth racing series.The 1:10 scale Neo Fighter, which weighs just over 1 kg, has become slightly longer at a good 40 cm and, thanks to the now larger wheelbase, offers even more directional stability when driving quickly. Its narrow, almost tubular DT-03 chassis contains well-protected electronics and mechanics. Independent suspension, differential, oil-filled shock absorbers and the flexible polycarbon body, which incorporates design elements from classic models, are standard. The highlight is the sensitively controllable electronic speed controller.Required accessories:PS paint, batteries and charger, RC system with servo2WD kit model, DT-03 chassis, electronic speed controller, 540 torque-tuned motor, polycarbonate body, oil pressure damper, rear pin-spike tires, front grooved tires, independent wheel suspension front/rear, rear axle with differential, instructions. Technical details: Impact-resistant tub frame chassis DT-03 Front impact protection Double wishbones Independent front and rear suspension Oil pressure shock absorbers 2WD rear wheel drive Differential gear Polycarbonate body Electric motor type 540 Torque Tuned electronic speed controller Pin spike tires at the rear Grooved tires at the frontTechnical data: Scale 1:10 Length 400 mm Width 248 mm Height 132 mm Wheelbase 287 mm Track v/h: 221/208 mm Wheel dimension WxØ: v 27x80 h 41x86 mm Warnings:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer.Only use tools for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glue (not included in the kit), note and follow the instructions provided there.Keep the kit away from small children. Prevent children from putting any components in their mouths or putting plastic bags over their heads.

Tamiya is delighted to announce another production of Item 47446, which is based upon the TT-02B buggy chassis featuring superb accessibility and high rigidity. The eye-catching pre-cut body is pre-painted in PS-23 Gun Metal, which is a popular color among R/C fans!Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer. Product details This is a 1/10 scale R/C model assembly kit. Length: 370mm, width: 250mm, height: 160mm. The stylish polycarbonate single-seater buggy body and wing are pre-painted in PS-23 Gun metal. The TT-02B chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 chassis. Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity. 4-wheel double wishbone suspension features long arms and CVA shock units, and is combined with high grip square spike tires to give excellent traction. Stickers share the Item 58630 design and color scheme. Front and rear gearboxes have differentials to ensure smooth cornering. A wide range of Hop-Up Option parts are available to tune the TT-02B chassis. Warning notices:Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Key Features Realistic 1967 Chevrolet C10 Truck body True, full-time 4-wheel drive 3-Link front and 4-link rear suspension for optimal handling Full ball bearing drivetrain Realistic steel frame rails for added strength Features Axial® AS-1 servo with servo saver Dynamite® 7.4V 350mAh 30C LiPo battery Dynamite® 030-size, 88T Brushed Electric Motor Realistic 1967 Chevrolet C10 Truck body Two bright LEDs in front bumper for night driving True, full-time 4-wheel drive 3-Link front and 4-link rear suspension for optimal handling Worm drive gears for front and rear axles that add ground clearance Realistic steel frame rails for added strength Hinged body system for easy access to on-board components Full ball bearing drivetrain Licensed wheels modeled after 1:1 Method Wheels Licensed tires modeled after 1:1 BF Goodrich Tires The detailed, ready-to-run 1967 Chevrolet C10 Truck is the latest model in the popular SCX24 series from Axial® Racing. Its compact, versatile 1/24 scale size opens up almost any environment to spur-of-the-moment RC crawling expeditions. When its time for a break at work, set up an obstacle course with items on your desk for the SCX24 Chevrolet C10 Truck to negotiate. Any room at home can also become the setting for exciting feats and contests. If youd rather run outdoors, go for it! Collect some twigs and marble-size rocks, dig a few holes, and soon youll have a challenging trail for fresh air adventuring. Your trucks water-resistant electronics save you from having to worry about wet track conditions when you crawl.With its realistic steel chassis frame rails, steel front and rear axles, and steel dogbones, this model has the strength to deliver Axial®-caliber crawling performance even in 1/24 scale. Its designed to keep right on running through rough trails and tough climbs. The SCX24 1967 Chevrolet C10 comes ready-to-run with all of the electronics, transmitter, receiver, servos, motor, ESC, batteries and charger included.

Inspired by the muscle cars that shaped the American auto industry in the 1960s and 70s, the 1/7 scale FELONY 6S BLX 4WD RTR tops off a tough and powerful ARRMA® brushless platform with stunning retro style ideal for intermediate-level drivers who are eager to experience street bashing or drag racing at 80+ MPH speeds (achievable in optimum conditions using a 6S LiPo and the included speed pinion gear). With its sleek muscle car body and large rear tires, the FELONY 6S BLX looks right at home blasting at high speeds on-road, over dirt roads and on oval tracks.The multi-part, undercut muscle car body design with an aerodynamically adjustable wing delivers standout street bashing style. It can also be customized with the included accessory kit and decals to provide scale muscle car looks the way YOU want them. The FELONY 6X BLX Street Bash RTR's eye-catching appearance extends to the realistic 5-spoke wheels mounted with dBoots® Hoons all-road tires. For authentic muscle car handling, ARRMA® engineers have included regular front and larger rear tires, with the front and rear gearbox ratios matched to the tire sizes.Underneath those streamlined Street Bash looks is a chassis which proves to the world, once again, that ARRMA® builds the most durable bashers. The 6061-T6 anodized aluminum chassis houses a heavy-duty drivetrain with steel driveshafts plus all-metal diff outdrives and gearbox internals. Its toughness is reinforced with a center chassis brace. The adjustable, oil-filled, anodized aluminum shocks are mounted on strong, black-anodized aluminum shock towers. Push the throttle to the max the FELONY 6S BLX Street Bash RTR is made to take it.Speaking of throttleARRMA® has equipped the FELONY 6S BLX Street Bash 4WD RTR with the 3-channel Spektrum® DX3 radio and an SR6110AT receiver featuring AVC® (Active Vehicle Control) technology for high-speed stability. A convenient voltage level indicator is built into the transmitter which lets you easily track on-board Smart battery power. The vehicle's brushless power system also features Spektrum® Firma Smart components, so it's easy to receive real-time updates of ESC temperature, receiver (BEC) voltage, drive pack voltage and motor RPM. Just download the Spektrum® Dashboard app for iOS or Android, available for free at the App Store or Google Play. Product DetailsThe 1/7 scale ARRMA® FELONY 6S BLX Street Bash 4WD RTR brings retro mod style to the BLX platform. Fast and tough, it can reach 80+ MPH speeds out of the box over on-road, dirt and oval tracks and includes telemetry-capable Spektrum® Smart electronics. Spektrum® 3-Channel DX3 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control) Compatible with Spektrum® Dashboard app for iOS or Android Spektrum® Firma 150A Smart ESC dBoots® Hoons all-road tires RTR Completion Level includes everything needed besides batteries and a compatible charger Features Spektrum® 3-Channel DX3 2.4GHz DSMR® radio and SR6110AT Receiver with AVC® (Active Vehicle Control) Compatible with Spektrum® Dashboard app for iOS or Android ARRMA® ADS-15M Waterproof Servo Spektrum® Firma 150A Smart ESC Spektrum® Firma 4074 2050Kv Brushless Motor with Safe-D input gears Muscle car handling with regular front and larger rear tires Front and rear gearbox ratios matched to tire sizes Customizable scale muscle car looks Includes interchangeable accessory kit and decals Multi-part undercut body design Adjustable front and rear body mounts Aerodynamically adjustable wing 3mm Plate, 6061-T6 anodized aluminum chassis Center brace for maximum durability Heavy-duty drivetrain with durable steel driveshafts throughout High-speed center driveshaft support Three oil-filled metal gear diffs All-metal diff outdrives and gearbox internals Oil-filled, adjustable, anodized aluminum shocks Black-anodized aluminum front and rear shock towers Front bumper and splitter Rear diffuser with exhaust detailing Waterproof receiver box Large battery trays Five-spoke wheels Durable wheel hubs dBoots® Hoons all-road tires CLASSIC MUSCLE Awesome resto-mod muscle car styling. CUSTOMIZE YOUR RIDE Change the look of your model with the included engine intake and cooling accessories pack. TUNABLE AERO Tune your wing"s aerodynamic stability how you want it DUAL-PURPOSE Front splitter adds downforce and stability. Highly detailed bumper adds awesome ARRMA looks. ALL-ROAD AGGRESSION dBoots HOONS tires designed for extreme all-road action. Classic 5-spoke wheels. BIGGER TIRES IN THE BACK Wider and larger diameter rear tires add to te resto-mod muscle car style. Front and rear gearbox ratios are matched to the tire size. WELL SUPPORTED The included center driveshaft high-speed support set prevents vibrations and increases drivetrain durability HEAVY DUTY Tough A-arms and drivetrain components that keep you bashing for longer CAPTURED & SEALED Captured ball ends that will never pop off and hub nut o-rings. SAFE-D FIRST Input gears are keyed to the drive cups composite sleeves to fortify the retention of the drive cup set screw HAVING IT LARGE Large battery trays allow you to fit up to 7.09" (180mm) x 2.17" (55mm) x 2.76" (70mm) size batteries ARRMA ADS-15M SERVO Strong, metal gears used throughout Waterproof, dustproof case 25 tooth output spline Torque: 14kg-cm (194oz-in) @6V Speed: 0.16sec/60deg @6V Dimensions: 40x38x20mm (industry standard size) SPEKTRUM FIRMA ESC Waterproof, dustproof design 150A, 6S LiPo ready (3S, 4S, & 6S compatible) Spektrum Smart Technology Fitted with reliable IC5 connectors (EC5 compatible) Integrated fan for reduced heat during extreme running High Quality 10awg wires Low voltage cut-off and thermal overload protection User programmable punch, brake, BEC, LVC sensitivity, reverse speed, and motor timing settings SPEKTRUM FIRMA MOTOR 2050Kv 4074 size 6S brushless motor Beautifully etched aluminum can 4-pole construction for smooth, consistent power 4mm gold bullet connectors for reliable and efficient connection Black anodized aluminum motor can for increased heat dissipation Super strong 5mm shaft Groove at the end of the motor shaft allows the installation of a pinion retaining E-clip SPEKTRUM DX3 RADIO & SR6110AT AVC RECEIVER Ergonomic steering wheel for precise control On-the-fly adjustable AVC gain for personalized handling Lightweight and ergonomic design for long bashing 3 channel radio system 2.4GHz connection built around DSMR technology Full-range telemetry capabilities SPEKTRUM DASHBOARD DX3 Radio system can be equipped with the Spektrum Dashboard Requires: Spektrum Bluetooth Module * DX3 Smart Phone mount * Smart Phone with the free Spektrum Dashboard App *Download the free Spektrum Dashboard app for your smart phone at your preferred app store* Optional items that need to be purchased separately