GLO5T039/01 GPM Carbon fiber brake disk with brake pads for Losi 5ive-T and Mini
Genuine GPM spare/option part. Complete set for Losi 5ive-T and Mini and brake pads made from high strength aluminium with carbon fiber brake discs.Dimensions disc:Diameter: 60 mmMaterial thickness: 4,2 mmBrakedisk adapter: 16,5 x 27 mmContents:2 x Carbon fiber brake disc2 x outer brake pads2 x inner brake pads
Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used "1"
Condition see photos.
FG 4 jaws Teflon clutch adjustable, used "2"
Fg 4 jaw Teflon clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.
10530 FG 4-block clutch 05 adjustable, used "5"
Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.-used.See photos for condition and delivery.Adjustable and in many details improved 4-block clutch.This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.
Optional Speedometer DX2E ACTIVE, second-hand "as good as new"
The Spektrum™ DX2E ACTIVE™ Speedometer Module is an exclusive add on upgrade that actively displays real time MPH or KPH right in front of the driver. All that is needed is a telemetry capable receiver, such as the TM1500 Telemetry Module, and the easy to install Spektrum RPM Sensor.The Spektrum DX2E ACTIVE Speedometer Module features a simple one touch interface, allowing the driver to easily setup the speedometer and view the top speed at the touch of a button. The DX2E ACTIVE Speedometer Module is pre-configured for the Losi® TENACITY™ SCT, making it an exceptionally simple plug and play upgrade system that adds the immersion of brightly lit, heads up speedometer display to your DX2E ACTIVE Radio. And for other vehicles, setup is as simple as inserting your models motor pole count and tire roll out.1 piece, used
Toro Beast Brushless Motor 1090 kV, used
Specifications Max. Current: 195 A Max. Voltage: 27 V Max. Power: 5,200 W KV (RPM/Volt): 1090 KV Depth of the mounting holes: 8 mm Hole pattern: 4 x M4 on 30 mm bolt circle diameter each Housing diameter: 57.8 mm Housing length: 92 mm Length of shaft: 30 mm Shaft diameter: 8 mm Weight: 960g Connector plug: 8 mm diameter Connection cable: 8AWG Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 1 piece
TT70120 Top Tuning Beast Brushless motor 620 kV, used
Genuine Top Tuning spare/option part, used !- Factory tested - New price 299,90€, top used for 199,90€ ! - Connection cable has been shortened.Specifications:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mm and 40 mm bolt circleCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730gFeatures:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon SteelsSuper Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 piece
10520 FG 4-jaw clutch for Zenoah, as good as new
Original FG tuning clutch. As good as new, see photos. Suitable for FG and Carson, HPI and Losi models with long adapter. Suitable for Zenoah and Chung Yang engines. 1 piece
y122 Lauterbacher 4 -Backen Teflon Kupplung, gebraucht
See photos for condition and scope of delivery. Adjustable clutch for Zenoah and Chung Yang engines. Suitable for FG, Carson, Losi, HPI models with long adapter. (not suitable for F1 and Evo2020) 1 piece
y123 Lauterbacher adjustable 3-jaw clutch with linings, used
See photos for condition and scope of delivery. Adjustable clutch for Zenoah and Chung Yang engines. Suitable for FG, Carson, Losi, HPI models with long adapter. (not suitable for F1 and Evo2020) 1 piece
y124 Lauterbacher adjustable 3-jaw clutch with linings, used
See photos for condition and scope of delivery. Adjustable clutch for Zenoah and Chung Yang engines. Suitable for FG, Carson, Losi, HPI models with long adapter. (not suitable for F1 and Evo2020) 1 piece
Chung Yang 23cc engine, used
Chung Yang 23cc engine, 2-bolt mounting with Walbro 603B carburetor without choke. The engine has been used very little (only one tank of fuel). There is some tarnishing on the underside, but this is only a cosmetic defect. The engine has been checked by our workshop and has been test run. See photos for features and condition. 1 pieces
y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch, used
Condition and scope of delivery see photos.With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 149.90
y140 3-Kammer Tuning Resonanzrohr mit Stahlkrümmer und Halterung, gebraucht
Used complete exhaust system ‘as good as new’ with manifold, hose, clamps and variable mounting. Suitable for FG touring cars/GT vehicles with long wheelbase. The resonator pipe is designed for a 530 wheelbase. The diameter is 51 mm and the total length is approx. 300 mm. 1 set
y178 FG Tuning carbon rear spoiler, used
Condition and scope of delivery as shown in photos. Width 245 mm Depth 60 mm Height 50 mm 1 piece
y0558/10 HT Car Bag XXL, used
Product information "y0558/10 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL , used.The XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions:Length: 100 cmWidth: 57 cmHeight: 39 cm
y555 Transport and sports bag, used
See photos for condition and scope of delivery. Very nice and mint condition transport bag with plenty of storage space. Dimensions: - Length 900 mm - Width 400 mm - Height 400 mm 1 piece
y556 Weber transport bag, used
See photos for condition and scope of delivery. Very nice and mint condition transport bag from Weber. Dimensions: - Length 800 mm - Width 450 mm - Height 350 mm 1 piece
y560 IMAX B6AC Lipo Battery Charger B6 80W Digital LCD Lipo Charger, used
Small dent in display, but fully functional.See photos for condition and scope of delivery.Description: This balance charger input voltage monitoring for battery charging protection, supports the new generation of A123 system batteries (Li-Fe). Suitable for parallel charging of Li-polymer/Li-ion/Li-Fe/Ni-MH/Ni-Cd/lead batteries. Specification: Model: IMAX B6AC Operating Voltage Range: DC 10.0-20.0V Switching capacity: max. Charging power: 80 W / max. Discharge power: 10 W. Charging Current Range: 0.1" 6.0A Discharge current range: 0.1-2.0A LiPo balancing current: 300mAh/cell Li-ion/LiPo battery: 1-6 cells. NiCd/NiMH battery number: 1-15 cells. Pb battery voltage: 2-20 V. Package includes: 1 x balance charger T-plug charging cable set, 1 x manual (English language not guaranteed), 1 x adapter
Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Condition see photos.