Genuine Mecatech spare/option part.New design for the Active Diff! It is lighter, smaller and it haven´t the adjustment screw. The inner parts are the same of the standard version.Heavy-duty, torque dependent self-locking differential with various possibilities for adjustment.The use of four satellite gears distributes the load on four ramps, increasing their service life compared to already existing solutions. Needle bearings on the back of the satellite gears ensure smooth operation of the ramp system.For adaption to the grip conditions you can choose from two different pairs of steel and carbon friction disks and ramp bells. The latter have 3 different ramp angles per pair of bells. All versions are included.Differential spur gear and ball bearings are vehicle-dependent and therefore not included.Content:1 x complete Mecatech Active Diff assembled with bell B for high grip2 x bell A for low grip4 x Carbon discs outer diameter 30 mm4 x Steel discs inner diameter 24 mm1 x Bottle of diff oil
Genuine HPI spare/option part. Assembled alloy diff wit 100er silicon oil.Seriously beef up your Baja drivetrain with the Complete HD Alloy Diff Gear Set! This is standard equipment on the Baja 5SC but will easily fit the Baja 5B, Baja 5B 2.0, Baja 5B SS and Baja 5T to dramatically increase the longevity and strength of your buggy or truck's drivetrain. The Baja 5SC features all-new Super Heavy Duty drivetrain parts that dramatically increase the fun you can get out of your Baja, plus an all-new one-piece rear hub carrier (#104781) that features adjustable rear toe inserts for extra race tuning!Contents:1 piece
Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set
Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear, used.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard and many other models.
Genuine Lightscale spare/option part.The Lightscale STD (Smooth Traction Differential) is a limited slip differential. It uses the known design of ramps for the satellite gear shafts to reduce slippage. The development of the Lightscale STD already began in 2007. In 2008, the first prototypes were ready and tested. In these almost 10 years, we have intensively tested and refined the product to the production stage. In addition to weight optimization and stamina, easy use, simple maintenance and comfortable handling of the car were on the to-do list.We have succeeded in developing a differential which, depending on the setup, achieves a maximum blocking effect, but gives you a car which is very easy to drive. The blocking effect does not kick in as suddenly as you expect from differentials of this kind, but develops pleasantly and controllably. Hence the name "Smooth Traction Differential". The great advantage of the STD is that even under adverse conditions good traction can be achieved. The STD is easy to handle. Due to the design, you cannot assemble it the wrong way.To ensure a long life the ramps are made of hardened steel. Nevertheless, the STDs weight is on par with comparable differentials. With only one set of ramps you can chose from four different blocking modes. The ramps are directional, which means that each of the two V-notch sides has a different blocking effect depending on the mounting direction. This allows for a very simple and fast change of the blocking effect by just turning the differential in the vehicle. Only the spur gear must be bolted to the other side of the STD for a change from ramp 1 to ramp 2 or vice versa. The differential does not need to be opened.The STD fits in all well-known 1: 5 touring cars and Formula 1 cars. The spur gear mount is compatible with all known gears, either standard or fine pitch. Common differential shafts with spline drive fit the STD. FG, H.A.R.M., Lauterbacher and the old RS-5 can be used. Our recommended gear oil is included.Contents:1 set
Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.
Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool: 8505 FG for bevel gear installation.Contents:1 set
Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.
Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set
€137.50*
This website uses cookies to ensure the best experience possible. More information...
