4493/03 FG O-ring for servo saver
Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces
5014 FG RC-plate for 1:5/Truck/Leopard
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece
4478 FG Alloy riser plates for rear axle
Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces
4483/01 FG Alloy-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set
4483 FG CFK-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set
5013 FG Roll cage support left/right
Genuine FG spare/option part. A = 83 mm.Contents:2 pieces
4493 FG Alloy servo saver 04 complete
Genuine FG spare/option part.This servo saver is an improvement of the 04 version. The servo saver part A is now equipped with a flanged sleeve which prevents the servo saver spring from rubbing against the servo saver shaft.Suitable for all FG models.Contents:1 set
4493/32 FG Reinforced o-rings for FG servo saver, 3.5 mm
Genuine FG spare/option part. Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3.5 mm.Contents:4 pieces
5010/01 FG Alloy chassis Sportsline short wheelbase 465 mm
Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece
4494/03 FG Ball bearing 7x14x5 mm
Genuine FG spare/option part. Contents:2 pieces
4530/07 FG Titanium wishbone turnbuckle M7x64 mm
Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Contents:2 pieces
4494/04 FG Ball bearing 7x11x3 mm
Genuine FG spare/option part. Fits 10353/02.Contents:1 piece
4497 FG Alloy front bulkhead A
Original FG Ersatz-/Tuningteil.Für alte FG EVO/Competition/Sportsline Modelle.
4516 FG Titanium steering rod left/right 6x65 mm
Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Fits all 1/5 models and race trucks.Content:2 pieces
4510 FG Titan Rear lower wishbone pin 6x63mm
Genuine FG spare/option part.Contents:2 pieces
4493/06 FG O-ring for servo saver, 6x13x4 mm
Genuine FG spare/option part.Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3 mm. The use of these o-rings increases servo saver hardness. For use in combination with metal gear servos only! Dimensions:Inner diameter: 6 mm.Outer diameter: 13 mm.Material thickness: 4 mm.Contents:4 pieces
4476 FG Alloy rear diff mount left/right 2 parts
Genuine FG spare/option part.Replacement for plastic rear axle mounts FG 6061 and FG 6062.For the installation in 1:6 Off-Road models you need (FG 6920/12) shorter mounting screws.Contents:1 set
4540 FG Titanium camber rod M8 / M10 x 100 mm
Genuine FG spare/option part. Contents:2 pieces
4475/01 FG Rear alloy shock mount 08
Genuine FG spare/option part. Rear alloy damper plate with several adjusting possibilities of the shock absorbers. Through assemly of the corresponding guide bushes the wishbone pin or respectively the upper wishbone can be adjusted to 2°, 3° and 4°.Use the spacer bushing only for installation of the rear shock in twin shock applications, f. e. for the Monster models.Replacement for FG plastic rear shock tower FG 7072/01Contents:1 piece
4478/01 FG Alloy riser plates for rear axle, Race Truck
Genuine FG spare/option part. Especially for FG Race-Truck. With a height from 18 mm.Content:2 pieces (right and left
4493/07 FG O-ring for servo saver 6x13x3,5 mm
Genuine FG spare/option part. Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3 mm. The use of these o-rings increases servo saver hardness. For use in combination with metal gear servos only! Dimensions:Inner diameter: 6 mm.Outer diameter: 13 mm.Material thickness: 3,5 mm.Contents:4 pieces
4492/01 FG Spacer bushing 4x8x15 mm
Genuine FG spare/option part. Spare part for4492.Contents:2 pieces