8485/05 FG Alloy differential adjustable - 1pce.

€149.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8485_05

EAN: 3410564522264

Product information "8485/05 FG Alloy differential adjustable - 1pce."

Item N° 8485/05
Alloy differential adjustable - 1pce.

Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1528 Bearing puller for differentials

Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*

8505 FG Mounting tool for bevel gear wheels - 1pce.

We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Similar products

2015-Light Mecatech Active Differential for 1/5 scale cars

Genuine Mecatech spare/option part.New design for the Active Diff! It is lighter, smaller and it haven´t the adjustment screw. The inner parts are the same of the standard version.Heavy-duty, torque dependent self-locking differential with various possibilities for adjustment.The use of four satellite gears distributes the load on four ramps, increasing their service life compared to already existing solutions. Needle bearings on the back of the satellite gears ensure smooth operation of the ramp system.For adaption to the grip conditions you can choose from two different pairs of steel and carbon friction disks and ramp bells. The latter have 3 different ramp angles per pair of bells. All versions are included.Differential spur gear and ball bearings are vehicle-dependent and therefore not included.Content:1 x complete Mecatech Active Diff assembled with bell B for high grip2 x bell A for low grip4 x Carbon discs outer diameter 30 mm4 x Steel discs inner diameter 24 mm1 x Bottle of diff oil

€449.90*

This product is no longer available.

ARA310937 ARRMA Assembled Diff Set F/R for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 pieces

€134.99*

Details

LOS252070/01 Losi Front Differential complete, Super Baja Rey 2.0

Genuine Losi spare/option part. Complete mounted and filled.Contents:1 piece

€104.90*

This product is no longer available.

8483/05 FG Alloy differential for 1:5 and 1:6

Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€137.50*

68405 FG Alloy differential 4WD complete

Genuine FG spare/option part. Precise, solid and reliable, for use at competitions, not adjustable.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Content:1 set

€151.95*

104963 HPI Complete HD alloy diff gear Baja 5SC

Genuine HPI spare/option part. Assembled alloy diff wit 100er silicon oil.Seriously beef up your Baja drivetrain with the Complete HD Alloy Diff Gear Set! This is standard equipment on the Baja 5SC but will easily fit the Baja 5B, Baja 5B 2.0, Baja 5B SS and Baja 5T to dramatically increase the longevity and strength of your buggy or truck's drivetrain. The Baja 5SC features all-new Super Heavy Duty drivetrain parts that dramatically increase the fun you can get out of your Baja, plus an all-new one-piece rear hub carrier (#104781) that features adjustable rear toe inserts for extra race tuning!Contents:1 piece

€170.50*

This product is no longer available.

Fully assembled alloy diff incl. reinforced diff. tube and bevel diff. gearwheel for FG 2WD/4WD + Carson/Smartech 2WD

y0570 Typ: y0570 For FG cars

Genuine HT spare/option part. Fully assembled Alloy differential including reinforced differential-tube and "inner-workings", such as original planetary gears, differential bevel gears, bevel differential wheel axles, sealed bearings, differential shafts with needle bearings (high-speed needle bearing).You only have to insert your full-floating axle (halfshafts). Since the FG and Carson are having different internal teeths by the planetary gears, different versions for FG and Carson/Smartech 2WD are available.Even on heavy off-road use and especially on jumps there are often problems with the original plastic differential. Noticeable is also the relatively thin differential-tube of the serial-equipping. Therefore our special offer for the complete Alloy differential including extra reinforced differential-tube.Set includet:8486 Alloy differential housing6068 Bevel differential gear axle6066/01 Differential bevel gear A, spline drive 6067 Differential bevel gear BFG ball bearings, sealed, y19610-rsReinforced differential tube for FG buggy differential, y09028498/01 Needle bearing for alloy differentialContents:1 set

€189.90*

LOS252070/02 Losi Middle Differential complete, Super Baja Rey 2.0

Genuine Losi spare/option part. Complete mounted and filled.Contents:1 piece

€104.90*

8501/05 FG Alloy differential self-locking fourfold

Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool: 8505 FG for bevel gear installation.Contents:1 set

€219.95*

8500/05 FG Alloy differential self-locking double - 1pce.

Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.

€186.95*

Elcon differential with quick-release axles for ball drive, used

Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Including ball bearings. Condition see photos. For many FG and Carson Models.

€99.00*

H103 Carson Complete alloy Diff for Wild GP Attack/HPI Baja 5B

Genuine Carson spare/option part. Contents:1 piece

€169.90*

Customers also viewed

8500/05 FG Alloy differential self-locking double - 1pce.

Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.

€186.95*

3014/01 FG Body mounts rear, Evo/Competition 510

Genuine FG spare/option part. The cutout is made to clear the exhaust's tail pipe. For Evo / Competition with medium wheelbase up to 510 mm in combination with FG tuned pipe # 7406.Dimensions:Total length: 115 mmLength until body support: approx. 95 mmContents:2 pieces

€17.90*

1100 Samba Formel 1 tuned pipe for FG, Harm and Genius

Genuine Samba spare/option part. Fits FG cars only in combination with a body shell from Samba or Lightscale!Our unique design for Formula 1 cars. The outlet tube is pointing under the car.B.I. is standing for Blown In. Best to use with the Moca F1 Carbon diffusor Contents:1 piece

€239.90*

Details

10456/02 FG Gear box flange for quick fix system F1

Genuine FG spare/option part. Spare part for 10456.Content:1 piece

€79.70*

y1605 SPEED TEC CRANK Team-Edition Zenoah 30,5 Tuning engine

The SPEED TEC CRANK genuine Zenoah engine is optimized for performance by hand with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Team Edition version modifications: Cylinder & case:Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust, the intake is flow-optimized the case is specially matched with enlarged and flow-optimized cross section towards the ports Piston:Transfer port area optimized for flow, weight reduced and the piston-roof is polishedCrankshaft:is adjusted, aligned and balancedFlywheel and ignition:Latest SPEED TEC CRANK SV ignition system for rc-car race engines with air baffles, a special balanced 62 mm diameter flywheel, modified ignition coil mount and special ignition system allows for the extremely fast revving of the SPEED TEC team edition engine and guarantees a significantly improved performance.The machined and more than 30% lighter than stock CRANK flywheel with fins on both sides contributes to the optimized engine cooling.Gaskets:Premium quality gaskets installed. Cylinder gasket installed using elastic gasket sealer.Insulator:Special matched and raised insulator Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€999.00*

y0351 Losi Offroad tuning spring Dirt-Spring for Losi 5ive-T/2.0/ Mini and UFRC Growler GX1

y0351 Version: y0351/11 - Losi long, silver

Genuine HT spare/option part. Fits Losi 5ive-T und Mini, UFRC Growler GX1, Carson Gas Devil/ Hell Devil 4x4. Not for Thunderbolt!.Dimensions:Socket: approx 33 mmInner diameter: approx 31 mmOuter diameter: 37 mmLength short spring: 103 mmCoils short spring: 8 StückLength long spring: 143 mmCoils long spring: 10 StückFront axle:TypeMeasuresColorItem N°Losi2.3 x 103 mmyellowy0351/01Losi2.4 x 103 mmredy0351/02Losi2.6 x 103 mmbrowny0351/03Losi2.75 x 103 mmbluey0351/04Losi2.8 x 103 mmsilvery0351/05Losi2.9 x 103 mmblacky0351/06Rear axle::TypeMeasuresColorItem N°Losi2.3 x 143 mmyellowy0351/07Losi2.4 x 143 mmredy0351/08Losi2.6 x 143 mmbrowny0351/09Losi2.75 x 143 mmbluey0351/10Losi2.8 x 143 mmsilvery0351/11Losi2.9 x 143 mmblacky0351/12Contents:2 pieces

€17.90*