Genuine FG spare/option part. 1:/6 Off-Road Buggy tires, medium, glued on FG Off-Road buggy-rim white. Outer Ø 175 mm, width 80 mm, Suitable for the FG cars Marder, Off-Road Buggy, Beetle and Monster cars with 18 mm square wheel drive. Suitable for other 1/6 cars as well: please check the wheel drive regarding this matter. When the wheel change causes a significant change of the tire's outer diameter, adapting the gear ratio is recommended.Contents:2 pieces
Genuine FG spare/option part. 1:/6 Off-Road Buggy tires, medium, glued on FG Off-Road buggy-rim black. Outer Ø 175 mm, width 80 mm, Suitable for the FG cars Marder, Off-Road Buggy, Beetle and Monster cars with 18 mm square wheel drive. Suitable for other 1/6 cars as well: please check the wheel drive regarding this matter. When the wheel change causes a significant change of the tire's outer diameter, adapting the gear ratio is recommended.Contents:2 pieces
Genuine FG spare/option part. Wide Off-Road Buggy tires 80mm, ready glued on rims. Suitable for all 1:6 Off-Road Buggies. To mount them on FG Off-Road models you need the 18 mm square wheel driver y6106/01. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Dimensions:Diameter: 180 mmWidth: 80 mmContent:2 pieces
Genuine FG spare/option part. 1:/6 Off-Road Buggy tires, medium, glued on FG Off-Road buggy-rim black. Outer Ø 175 mm, width 80 mm, Suitable for the FG cars Marder, Off-Road Buggy, Beetle and Monster cars with 18 mm square wheel drive. Suitable for other 1/6 cars as well: please check the wheel drive regarding this matter. When the wheel change causes a significant change of the tire's outer diameter, adapting the gear ratio is recommended.Contents:2 pieces
Narrow Off-Road Buggy tires 65 mm, ready glued on rims. Suitable for all 1:6 Off-Road Buggies. To mount them on FG Off-Road models you need the 18 mm square wheel driver y0067. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing () if necessary is unavoidable.Durchmesser x Breite / diameter x width 180 x 60 mm
Genuine FG spare/option part. 1:/6 Off-Road Buggy tires, soft, glued on FG Off-Road buggy-rim black. Outer Ø 175 mm, width 65 mm, Suitable for the FG cars Marder, Off-Road Buggy, Beetle and Monster cars with 18 mm square wheel drive. Suitable for other 1/6 cars as well: please check the wheel drive regarding this matter. When the wheel change causes a significant change of the tire's outer diameter, adapting the gear ratio is recommended.Contents:2 pieces
Narrow Off-Road Buggy tires 60 mm, ready glued on rims. Suitable for all 1:6 Off-Road Buggies. To mount them on FG Off-Road models you need the 18 mm square wheel driver y0067. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing () if necessary is unavoidable.Diameter: 180 mmWidth: 60 mmContents:2 pieces
Genuine FG spare/option part. 1:/6 Off-Road Buggy tires, medium, glued on FG Off-Road buggy-rim black. Outer Ø 175 mm, width 65 mm, Suitable for the FG cars Marder, Off-Road Buggy, Beetle and Monster cars with 18 mm square wheel drive. Suitable for other 1/6 cars as well: please check the wheel drive regarding this matter. When the wheel change causes a significant change of the tire's outer diameter, adapting the gear ratio is recommended.Contents:2 pieces
Genuine FG spare/option part. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Contents:2 pieces
The new Stadium Truck tires S are characterized by a lot of grip and stability in curves. This was achieved through a newly developped, softer rubber mixture. The tires are glued on Stadium chrome rims. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.These Stadium tires have a bigger square depth, this reduces a cylindrical turning of the square wheel significantly. To mount these tires you need a 18 mm square wheel driver.Durchmesser x Breite / diameter x width 170 x 90 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Genuine FG spare/option part. The Killer tires are glued on genuine 1/6 scale FG buggy rims with extension ring! Suitable for all 1:6 Off-Road models, Monster and Stadium Trucks. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.This Killer tire is distinguished through a lot of grip and a long durability. Diameter x width: 165 x 65 mm.Rim with 18 mm square drive.Content:2 pieces
Item N° 6406/05 Off-Road tires Killer Soft glued - 2pcs.The Killer tires are glued on genuine 1/6 scale FG buggy rims with extension ring! Suitable for all 1:6 Off-Road models, Monster and Stadium Trucks. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.This Killer tire is distinguished through a lot of grip and a long durability. Diameter x width: 165 x 65 mm Rim with 18 mm square drive
Genuine GRP spare/option part.Glued on GRP off-road disc rim with 18 mm square (für FG, Smartech & other) or 24 mm hex (for Losi, HPI + Co.). GRP is one of the leading manufacturers of 1/5 and 1/6er street; and with its current off-road tires MICRO and CROSS he has the optimal solution for all track conditions and surfaces. As a recommendation: The dirtier the track or the colder the weather, the more grippy (softer) the rear tire should be.Note regarding the front tires: For 2WD cars it should be one to two steps harder than the rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is usually a good choice.Of course, as with all tires, it also applies to the GRP tires MICRO and CROSS: the softer the tire, the higher the wear.On rough pile carpet the GRP-CROSS tire is often a good alternative to the GRP Micro. Its coars tread it gives your off-roadcar the necessary grip on loose as well as on firmer soil, sand and also in case of a "worn-out" track.The following classification should help you with the tire selection, even though it is certainly recommended to find the best possible tire for your individual setup by your own test drives on the track.GRP-CROSS GW91-P1 soft for astro turf/carpet tracks, in colder weather and low grip conditionsGRP-CROSS GW91-P3 medium for astro turf/carpet tracks, but at higher temperatures and good grip GRP-CROSS GW91-S1 soft for clay soil, on colder days and less grip on the track GRP-CROSS GW90-S3 medium also suitable for natural terrain, at normal temperatures and good grip. GRP-CROSS GW91-S5 hard, for good to very good grip conditions and/or good weatherBut as already said: "The proof is in the pudding", which means that a GRP-MICRO-S tire can also prove to be the best on a specific astro turf track, depending on the tracks condition and weather! And, of course, vice versus with a GRP-MICRO P tire. This applies especially to race tracks with a mix of carpet/astro turf and sorts of natural soil surface sections.As with full scale racing, in RC-car races, the right selection of tires often decides on victory or defeat.Technical note: The outside shoulder of the tires is reinforced and is labeled "OUT" by GRP!Contents:2 pieces
Genuine GRP spare/option part.GRP is one of the leading manufacturers of 1/5 and 1/6er street; and with its current off-road tires MICRO and CROSS he has the optimal solution for all track conditions and surfaces. As a recommendation: The dirtier the track or the colder the weather, the more grippy (softer) the rear tire should be.Note regarding the front tires: For 2WD cars it should be one to two steps harder than the rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is usually a good choice.Of course, as with all tires, it also applies to the GRP tires MICRO and CROSS: the softer the tire, the higher the wear.On rough pile carpet the GRP-CROSS tire is often a good alternative to the GRP Micro. Its coars tread it gives your off-roadcar the necessary grip on loose as well as on firmer soil, sand and also in case of a "worn-out" track.The following classification should help you with the tire selection, even though it is certainly recommended to find the best possible tire for your individual setup by your own test drives on the track.GRP-CROSS GW91-P1 soft for astro turf/carpet tracks, in colder weather and low grip conditionsGRP-CROSS GW91-P3 medium for astro turf/carpet tracks, but at higher temperatures and good grip GRP-CROSS GW91-S1 soft for clay soil, on colder days and less grip on the track GRP-CROSS GW91-S3 medium also suitable for natural terrain, at normal temperatures and good grip. GRP-CROSS GW91-S5 hard, for good to very good grip conditions and/or good weatherBut as already said: "The proof is in the pudding", which means that a GRP-MICRO-S tire can also prove to be the best on a specific astro turf track, depending on the tracks condition and weather! And, of course, vice versus with a GRP-MICRO P tire. This applies especially to race tracks with a mix of carpet/astro turf and sorts of natural soil surface sections.As with full scale racing, in RC-car races, the right selection of tires often decides on victory or defeat.Technical note: The outside shoulder of the tires is reinforced and is labeled "OUT" by GRP!In our shop selection, the GRP off-road tires are also available mounted and glued on the original GRP Race disc rim. Dimensions:Outside diameter approx: 175 mmInside diameter approx: 135 mmWidth approx 70 mmContents:2 pieces
Item N° GWH71 GRP 1:6 Buggy "BULDOG" tire glued, 2 pcs.medium aggressive knobby treadgood directional stabilitygood lateral tractiongood propulsionfor solid surfacesTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.
Item N° GWK71 GRP 1:6 Buggy "BULDOG" tire glued on yellow rims, 2 pcs.- medium aggressive knobby tread - good directional stability - good lateral traction - good propulsion - for solid surfacesTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.
mcd_m010701ro Version:
M010701RO/02 155 mm each one pair MCD Astro-Block tires / inlays and rims+ 18.3EUR
Also available mounted and glued in the options menu.The MCD Astro-Block tires feature 42 rows with a total of 230 approx. 5 x 5 x 5 mm ultra-strong lugs with different shape and orientation providing optimal grip, even on loose surfaces like sand or soil.Due to the extreme stress created by the MCD Astro-Block tire, careful bonding is recommended on reinforced 1/6 rims like FG # 6105/01.The tires come with a molded rigid inserts which transmit the applied force while maintaining the tires shape.The MCD Astro-Block competition tire is particularly suitable for tracks with loose soil and sandy surface. The tread design allows for extremely fast cornering and excellent propulsion on these surfaces.By cutting the tread you can perfectly fine-tune your car with the MCD Astro-Block tires. The partially or nearly complete caps cutting of the outside lugs has a tremendous effect on the cars handling characteristics when cornering grip.In a nut shell: cutting the lugs of MCD Astro-Block tires on the front axle reduces steering and makes your car usually less aggressive (more drivable). In cases of extreme oversteer (i.e. common in high grass etc.) additional cutting of the lugs on the inside shoulder may help to counteract traction rolling.The excellent grip and thereby accumulated strain on the bonding of the MCD Astro-Block tires requires careful control of the bonding after each use.Recommended tire repair kit: y0067.Dimensions:Outer diameter (glued) approx. 155 mmInner diameter (glued) approx. 110 mmWidth approx. 65 mmContent:2 pieces
CROSS BOND 170 x 80 mm and 170 x 60 mm tires mit MadMax Extreme 20 bolt-beadlock rims with 18 mm wheel square and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!