7427 FG Plastic gearwheel 40 teeth
Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece
7439 FG Alloy gear carrier 52mm - 1pce.
Item N° 7439 Alloy gear carrier 52mm - 1pce.For 44T - 39T spur gears.For 10 mm diameter shafts.
7431 FG Steel gearwheel hardened 22 teeth - 1pce.
Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5
7432 FG Steel gearwheel hardened 24 teeth - 1pce.
Item N° 7432 Steel gearwheel hardened 24 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5
7474/05 FG Spacer bushing Ø13/10 x 5 mm
Genuine FG spare/option part. This spacer bushing goes into the gear plate between the two clutch bell bearings, preventing them from binding when installing the pinion on the clutch bell.Contents:1 piece
7424 FG Plastic gearwheel 38 teeth
Genuine FG spare/option part.Suitable for all 1:5 models. Requires gear carrier 7423.Dimensions:Diameter: 60 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Contents:1 piece
7425 FG Plastic gearwheel 39 teeth - 1pce.
Suitable for all 1:5 models.Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7427/01 FG Plastic gearwheel 40 teeth 2-speed - 1pce.
Suitable for all 1:5 models with 2-speed gear.Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5
7433 FG Steel gearwheel hardened 26 teeth - 1pce.
Item N° 7433 Steel gearwheel hardened 26 teeth - 1pce.Suitable for 38 teeth main gear wheel.Diameter 41.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5
7432/23 FG Steel gearwheel hardened 23 teeth - 1pce.
Item N° 7432/23 Steel gearwheel hardened 23 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7429 FG Plastic gearwheel 41 teeth - 1pce.
Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7432/25 FG Steel gearwheel hardened 25 teeth
Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece
7439/05 FG Alloy gear carrier 52mm special, 1 pce.
Item N° 7439/05 Alloy gear carrier 52mm special, 1 pce.Precision alloy gear carrier, exact support of the plastic gearwheels 39, 40, 41, 42 and 44 teeth. Very low height design. For 10 mm diameter shafts.Please note: competition layshaft 6041/05 is necessary for installation!
6733/06 FG Thread pin M6x6mm - 15 pcs.
Item N° 6733/06 Thread pin M6x6mm Tuflock - 15 pcs.
7450 FG 2-speed gear box 1:5 2WD
2-speed gear box, retrofotting is possible for Smartech/Carson C5, all 1:5 2WD FG models except Formula 1 + FG EVO 2020, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gearwheels with 16-26 teeth in alloy oder steel.If you use the gear wheels (38 teeth) you need the alloy hub A 47mm ().Contained pinions: 22 to 42 teeth and 24 to 40 teeth.Contents:1 piece
7422 FG Gear wheel protect for 38/40/42 teeth - set
Gearwheel protection in transpartent polycarbonate for all FG 1:5 scale models with the gear wheels 38, 40, 42 teeth. Protects the driving gear wheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.
7430/25 FG Alloy gearwheel 25 teeth - 1pce.
Extreme light alloy gear wheel in anodizing quality with 25 teeth suitable for the gear wheels with 39, 40 and 41 teeth.Diameter 38,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7452 FG 2-speed gear box 1:5 4WD for Sportsline 4WD, set
Genuine FG spare/option part.Fits FG cars with 510 mm and 535 mm wheelbase. Not suitable for Competition and Formular 1 models.Included gears:1st gear: 22T / 42T2nd gear: 24T / 40T2-speed gear box, retrofitting is possible for all FG 1:5 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel. If you use the gearwheel 7424/01 (38 teeth) you need the allow hub A 47 mm 7456/01.
7431/21 FG Steel gearwheel hardened 21 teeth - 1pce.
Item N° 7431/21 Steel gearwheel hardened 21 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7430/24 FG Alloy gearwheel 24 teeth
Genuine FG spare/option part. Extreme light alloy gear wheel in anodizing quality with 24 teeth.Suitable for the gear wheels with 39, 40 and 41 teeth.Dimensions:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1,5Contents:1 piece
7468 FG Spring/ball
Item N° 7468 Spring/ball.Suitable for all FG 2-speed gear boxes.Ball 5 mmSpring 4.6 mm diameter x 10 mm length
7430/23 FG Alloy gearwheel 23 teeth - 1pce.
Extreme light alloy gear wheel in anodizing quality with 23 teeth suitable for the gear wheels with 39, 40 and 41 teeth.Diameter 38,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.
7462/06 FG ball bearing 10x19x5 sealed, 2 pcs.
Genuine FG spare/option part.Suitable for all FG models and other makes.