Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

398 products found for "lager_0003"

Filter

Catalogue #1

Average rating of 0 out of 5 stars

Ball bearings for FG, sealed, diverse sizes
lager_0003 Size: y19611 For wheel bearing, 2 pieces
Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

€10.70*

Average rating of 0 out of 5 stars

y0884 Nitrided steel balls
Genuine HT spare/option part. Nitrided steel balls for FG 10 mm ball joints. These balls last significantly longer than their stock counterparts. You will notice the wear resistance most when used with offroad models where dirt is a real problem for those ball joints.The set fits all FG cars except EVO 04 and Formula 1.Contents:14 piece

€49.95*

Average rating of 0 out of 5 stars

y2012-32/04 Mecatech Lager 8x19x6, set of 4
Genuine HT spare/option part for the FW01.Wheel bearings front and rear, sealed on both sides.Content:1 Set

€14.90*

Average rating of 0 out of 5 stars

y2012-32/04LL Mecatech low-friction Lager 8x19x6, set of 4
Genuine HT spare/option part for the FW01.Low-friction Wheel bearings ABEC-7 front and rear, sealed on both sides.Content:4 pieces

€21.90*

Average rating of 0 out of 5 stars

2012-32 Mecatech Lager 8x19x6
Genuine Mecatech spare/option part for the FW01.Wheel bearings front and rear, sealed on both sides.Content:1 piece

€7.50*

Average rating of 0 out of 5 stars

y0003/01 Pin for Billet brake lever y0003 and y0015
Genuine HT spare/option part. Fits for the brake levers with the numbers y0003 and y0015.Contents:2 pieces

€2.90*

Average rating of 0 out of 5 stars

y0003 Billet brake lever, long
Genuine HT spare/option part. Fits HT Baja 5B premium brake and FG offroad models, race truck and Formula 1.Contents:2 pieces

€24.90*
%

Average rating of 0 out of 5 stars

HK0003, Hurrax Spacer for body mount 3, 4 pcs.
Mounting hole 4 mmHole spacing 16 mm Height 3 mmLength 30 mmWidth 10 mm

€3.98* €7.95* (49.94% saved)

Average rating of 0 out of 5 stars

E540003 UFRC Chassis reinforcement plate
Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€19.90*
%

Average rating of 0 out of 5 stars

HA0003, Hurrax Gear plate, 1 pce.

€14.98* €29.95* (49.98% saved)

Average rating of 0 out of 5 stars

SPMX50003S30H3 Spektrum 11.1V 5000 mAh 3S 30C Smart LiPo, Hardcase, IC3
LiPo batteries with Spektrum Smart technology practically take care of themselves. When combined with a Spektrum Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant its connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition. Thats a Smart Battery pack!Spektrum Smart technology is about offering a higher connection to your hobby. Its a connection that puts you in complete control, makes you more aware and more confident about the capability of your equipmentall the while making your hobby easier. The combined result will make you wish everything about your hobby was smarter. Spektrum Smart LiPo Batteries are a part of a wide series of Smart technology products now available.Feature OverviewYoull never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger Start button. Smart technology takes care of the rest.Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector thats conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.Spektrum Smart LiPo Batteries Store Unique Data, such as:Battery BrandBattery TypeBattery CapacityBattery C RatingIndividual Cell VoltageBattery TemperatureCharge/Discharge CyclesSpektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery youve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the Start button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.Specification:Application: SurfaceBattery Type: Smart LiPoBattery Voltage: 11.1VCapacity: 5000 mAhConnector Type: IC3Hard Case: YesHeight: 1.5 in. (39mm)Length: 5.5 in. (139mm)Maximum Continuous Discharge Rate: 30CNumber of Cells: 3Size: 5.5 x 1.8 x 1.5 in. (139 x 46 x 39mm)Weight: 0.90 lbs. (410g)Width: 1.8 in. (46mm)Contents:1 piece

€69.99*

Average rating of 0 out of 5 stars

y0784/138 Painted Stadium Jeep body shell Camouflage
Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

Average rating of 0 out of 5 stars

40003 Samba Moca carbon Airbox for Formula 1
Genuine Samba spare/option part. Moca Racing Airbox Carbon ultralight for Moca and Lightscale Formula 1 body shells.Very strong airbox, latest version which was revised in 2023. Contents:1 set

€119.90*
%

Average rating of 0 out of 5 stars

AXI00003T1 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green
Product Details Push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Unique 4WS modes, extreme articulation, oversize tires, and more let you crawl over bigger obstacles and pull tougher lines than any other 1/24 scale rig. Key Features Three 4-wheel steering (4WS) modes give all drivers new terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. Rockster wheels and Rock Lizards tires produce trail-taming traction. Fully equipped — you can hit the trails almost immediately! In The Box (1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler (1) Spektrum SLT3 2.4GHz 3-Channel Radio System (2) Axial AS-1 Servo (1) Spektrum 2-in-1 ESC/Receiver Combo (1) 0.5 Amp USB Charger (1) Dynamite 88T Brushed Electric Motor (1) Dynamite 350mAh 2S 7.4V LiPo (4) AA Transmitter Batteries (1) Miscellaneous Tools (1) 1/24 AX24 XC-1 4WS Manual Needed to Complete Nothing! Everything you need to begin having fun with the 1/24 AX24 XC-1 4WS Crawler is included! Features Three 4-wheel steering (4WS) modes give drivers new terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. Long travel coilover shocks keep wheels on the ground to maximize traction. 4-Link front and rear suspension reduces axle steer and torque twist. Front and rear lockers with worm gear setup increase ground clearance. Steel front and rear axles, stub axles, and dog bones provide strength. Splined and sleeved drive shafts increase suspension travel. Hinged body system offers easy access to on-board components. Rockster wheels and Rock Lizards tires produce trail-taming traction. No bushings — entire vehicle features sealed bearings. Dynamite 88T motor provides the torque to conquer steep climbs. Fully equipped — you can hit the trails almost immediately! Overview Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails toward destinations far removed from the modern world. Their journey's end will reward them with beautiful views that only a select few ever see. But the best memories are made during the journey itself.Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if most people would have trouble getting through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pushed to new limits. The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger obstacles and pull tougher lines than you can with any other 1/24 scale rig. The new AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to maneuver over or around almost anything in your way. This system gives all drivers new terrain conquering ability! In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires. The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger obstacles than our SCX24 platform rigs). Newcomers will find it to be a fun and highly capable mini crawler to run on indoor or outdoor courses. It's also a great way for full-scale off roading enthusiasts to exercise and refine their skills. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully assembled and equipped, you can start today. FOUR-WHEEL STEERING (4WS) The unique AX24 4-wheel steering system gives all drivers new terrain conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to maneuver over or around anything in your way. SIDE PLATE CHASSIS The durable side plate chassis is engineered to allow high clearance and generous articulation. Angled rock sliders also help you maneuver past rocks, roots, ledges, and other large obstacles. Driving the AX24 XC-1, you go where you want to go! LED LIGHTS LED rock lights mounted in the rock sliders keep your path visible in low light. You'll be able to see and surmount obstacles you might not otherwise spot. Day or night, the AX24 XC-1 keeps your adventure alive. COILOVER SHOCK ABSORBERS Longer, 51mm coilover shocks are new for the AX24 platform. Mounted at a lay back angle in the side plate chassis, they allow increased articulation to keep the wheels on the ground and maximizing traction over uneven surfaces. 4-LINK FRONT AND REAR SUSPENSION The suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and reduce axle steer and torque twist. WORM GEARS The front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance. DURABLE STEEL AXLES Steel front and rear axles, stub axles and dog bones provide the strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTS The drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.HINGED BODY SYSTEM The hinged body system provides fast, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up. ROCKSTER WHEELS & ROCK LIZARDS TIRES In 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.FULL BALL BEARINGS Although the AX24 is smaller than many other Axial RC crawlers, it still measures up to our highest quality standards. For example, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the entire vehicle. AXIAL AS-1 SERVOS Axial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while protecting the servo gears in the event of a bind or impact.DYNAMITE 88T BRUSHED MOTOR The Dynamite 88T brushed electric motor provides the right amount of torque to conquer steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the gears. IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of multiple other rigs without worrying about interference. A new throttle port serves as an ESC bypass for using aftermarket ESCs without having to buy a new receiver. Product Specifications Tire Tread Axial Rock Lizards Vehicle Type Rock Crawler Charger Included Differential Worm Gear 16T/4T Receiver Included Shock Type Coil-over 1.35-2.0 in (35-51mm), Plastic Power Type Electric Servos Included Front Track 4.5 in (113mm) Product Width 4.5" (114 mm) Radio Included Motor Type Brushed Rear Track 4.5 in (113mm) Speed Control Included Wheelbase 5.3" (135 mm) Battery Included Connector Type PH 2.0 (High-Current Ultra Micro) Ground Clearance 1.3" (34mm) Product Length 7.8" (198 mm) Spur Gear 55T Steering Type 4WS Suspension Solid Axle, Front and Rear Wheel Width 0.5 in (12.5mm) Body XC-1 Screened Brakes Integral with ESC Pinion 11T Scale 1/24 Ball Bearings Complete Vehicle Chassis Side Plate Completion Level Ready-To-Run Drivetrain 4WD Drive Type Forward/Brake/Reverse Product Height 3.7" (94 mm)

€149.99* €179.99* (16.67% saved)
%

Average rating of 0 out of 5 stars

AXI00003T2 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange
Product details Overcome obstacles and conquer new trails with the Axial AX24 XC-1 Rock Crawler RTR. Unique 4WS modes, extreme articulation, oversized tyres and more let you crawl over bigger obstacles and conquer tougher tracks than any other 1:24 scale car. Key Features Three 4-wheel steering modes (4WS) give the driver new ways to conquer any terrain. The sideplate chassis allows greater articulation for improved handling in rough terrain. LED rock lights mounted in the rock sliders ensure that your path is clearly visible in low light. Rockster rims and Rock Lizards tyres provide ground-breaking traction. Fully equipped - you can hit the trails almost immediately! In The Box(1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler(1) Spektrum SLT3 2.4GHz 3-Channel Radio System(2) Axial AS-1 Servo(1) Spektrum 2-in-1 ESC/Receiver Combo(1) 0.5 Amp USB Charger(1) Dynamite 88T Brushed Electric Motor(1) Dynamite 350mAh 2S 7.4V LiPo(4) AA Transmitter Batteries(1) Miscellaneous Tools(1) 1/24 AX24 XC-1 4WS Manual Needed to CompleteNothing! Everything you need to begin having fun with the 1/24 AX24 XC-1 4WS Crawler is included!FeaturesThree 4-wheel steering (4WS) modes give drivers new terrain conquering ability.Side plate chassis allows greater articulation for improved handling over rough terrain.LED rock lights mounted in the rock sliders keep your path visible in low light.Long travel coilover shocks keep wheels on the ground to maximize traction.4-Link front and rear suspension reduces axle steer and torque twist.Front and rear lockers with worm gear setup increase ground clearance.Steel front and rear axles, stub axles, and dog bones provide strength.Splined and sleeved drive shafts increase suspension travel.Hinged body system offers easy access to on-board components.Rockster wheels and Rock Lizards tires produce trail-taming traction.No bushings — entire vehicle features sealed bearings.Dynamite 88T motor provides the torque to conquer steep climbs.Fully equipped — you can hit the trails almost immediately!OverviewEvery weekend, groups of off-road rock crawling enthusiasts gather to follow trails toward destinations far removed from the modern world. Their journey's end will reward them with beautiful views that only a select few ever see. But the best memories are made during the journey itself.Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to maneuver up, over, and beyond. It doesn't matter if most people would have trouble getting through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pushed to new limits.The 1/24 scale Axial AX24 XC-1 speaks to the extreme crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger obstacles and pull tougher lines than you can with any other 1/24 scale rig.The new AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain.Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to maneuver over or around almost anything in your way. This system gives all drivers new terrain conquering ability!In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll enjoy how it takes on even steeper inclines and bigger obstacles than our SCX24 platform rigs). Newcomers will find it to be a fun and highly capable mini crawler to run on indoor or outdoor courses. It's also a great way for full-scale off roading enthusiasts to exercise and refine their skills.Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully assembled and equipped, you can start today.   FOUR-WHEEL STEERING (4WS)The unique AX24 4-wheel steering system gives all drivers new terrain conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to maneuver over or around anything in your way.  SIDE PLATE CHASSISThe durable side plate chassis is engineered to allow high clearance and generous articulation. Angled rock sliders also help you maneuver past rocks, roots, ledges, and other large obstacles. Driving the AX24 XC-1, you go where you want to go!  LED LIGHTSLED rock lights mounted in the rock sliders keep your path visible in low light. You'll be able to see and surmount obstacles you might not otherwise spot. Day or night, the AX24 XC-1 keeps your adventure alive.  COILOVER SHOCK ABSORBERSLonger, 51mm coilover shocks are new for the AX24 platform. Mounted at a lay back angle in the side plate chassis, they allow increased articulation to keep the wheels on the ground and maximizing traction over uneven surfaces.  4-LINK FRONT AND REAR SUSPENSIONThe suspension geometry uses a 4-link design that works together with the AX24 side plate chassis to increase articulation and reduce axle steer and torque twist.  WORM GEARSThe front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance.  DURABLE STEEL AXLESSteel front and rear axles, stub axles and dog bones provide the strength and durability needed to keep running with confidence during tough climbs and over rough trails.  SPLINED DRIVE SHAFTSThe drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.  HINGED BODY SYSTEMThe hinged body system provides fast, easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.  ROCKSTER WHEELS & ROCK LIZARDS TIRESIn 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for nostalgic looks and trail-taming traction.  FULL BALL BEARINGSAlthough the AX24 is smaller than many other Axial RC crawlers, it still measures up to our highest quality standards. For example, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the entire vehicle.  AXIAL AS-1 SERVOSAxial AS-1 servos are mounted just above the axle, with servo savers that allow for steering accuracy while protecting the servo gears in the event of a bind or impact.  DYNAMITE 88T BRUSHED MOTORThe Dynamite 88T brushed electric motor provides the right amount of torque to conquer steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and protect the gears.  IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEMThe included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of multiple other rigs without worrying about interference. A new throttle port serves as an ESC bypass for using aftermarket ESCs without having to buy a new receiver.   Product SpecificationsMotor TypeBrushedRear Track4.5 in (113mm)Speed ControlIncludedWheelbase5.3" (135 mm)Power TypeElectricServosIncludedBodyXC-1 ScreenedBrakesIntegral with ESCPinion11TScale1/24Ball BearingsComplete VehicleChassisSide PlateCompletion LevelReady-To-RunDrivetrain4WDDrive TypeForward/Brake/ReverseProduct Height3.7" (94 mm)BatteryIncludedConnector TypePH 2.0 (High-Current Ultra Micro)Ground Clearance1.3" (34mm)Product Length7.8" (198 mm)Spur Gear55TSteering Type4WSSuspensionSolid Axle, Front and RearWheel Width0.5 in (12.5mm)Tire TreadAxial Rock LizardsVehicle TypeRock CrawlerFront Track4.5 in (113mm)Product Width4.5" (114 mm)RadioIncludedChargerIncludedDifferentialWorm Gear 16T/4TReceiverIncludedShock TypeCoil-over 1.35-2.0 in (35-51mm), Plastic

€149.99* €179.99* (16.67% saved)

Average rating of 0 out of 5 stars

LOS350003 Losi Front Hood, Clear, Super Baja Rey
Genuine Losi spare/option part. Contents:1 pieces

€59.99*

Average rating of 0 out of 5 stars

02.03.01 OSKART Flange bearing mount
Genuine OSKART spare/option part.Fits 1/2 scale OSKART.Contents:1 piece

€27.00*

Average rating of 0 out of 5 stars

LOS257003 Ball Bearing 8 x 16 x 5 mm 6IX
Genuine Losi spare/option part.Content:2 Stück

€15.99*

Average rating of 0 out of 5 stars

B56071 Bearing 10x15x4mm
Dimensionally identical with Losi LOSB5970Contents:2 piece

€6.90*

Average rating of 0 out of 5 stars

y19135 Ball Bearing Extractor
For ball bearings (diameter 8 x 22 mm) in steering blocks and uprights.Instructions:Remove the M5 bolt until the gap between the bolt's head and the top of the spindle is slightly more than the the width of the bearingInsert the spindle with the bolt into the bearing and srew the bolt in with an allen key from the opposite (do not tighten the bolt!)Now remove the bearing by just turning the spindle ccw

€34.90*

Average rating of 0 out of 5 stars

Ceramic ball bearings, sealed, 2 pcs.
y0097 Application: y0097/03 Clutch bell (exc. standard Formula 1) 10x22 mm+ 9.2EUR
Hybrid bearings with silicone nitride balls and steel inner and outer race. The bearings have an extremely low rolling resistance and a longer life than standard bearings. Please note that for installation only a shrink fit or a press fit via the outer race is allowed. Tapping them in will destroy the bearing.

Variants from €30.70*
€39.90*

Average rating of 0 out of 5 stars

B56072 Bearing 9 x 20 x 6, 2 St.
Dimensionally identical with Losi LOSB5974Contents:2 piece

€9.80*

Average rating of 0 out of 5 stars

86653 HPI Rubber bushing 6 x 9 x 10 mm
Genuine HPI spare/option part. Contents:6 pieces

€7.99*

Average rating of 0 out of 5 stars

Z970 HPI Bearing press tool 12 x 24 mm
Genuine HPI spare/option part. Use the Bearing Press Tool to install the front axle bearings for your Baja 5B. This makes installation quick, easy and safe. The Bearing Press Tool is included with the Baja.Content:1 pieces

€9.88*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency