Genuine FG spare/option part. Factory painted Audi A4 DTM, "Albers" design with decals applied. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeigth: 240 mmWheelbase: 530 mmContents:1 piece
Painted Audi RS5 DTM body shell with Team Audi-Ultra paint sheme for 1/5 cars with 530/535 mm wheelbase.With rear wing, flaps and decal sets for car and Audi Ultra paint sheme.This Audi RS5 DTM body shell is also available clear with part number y1441.Required body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 3014 Body mounts Side body mount rear: FG 3014 Body mounts / for 4WD: FG 7014/02 Body mount
Suitable for all models with a 465 wheelbase. The body consists of the main part, front spoiler and 3-part rear spoiler.Required body mounts:Mount front: FG 5020/01 Front bumperRear body mount: FG 5152 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 850 mmWidth: front 380 mm / rear 400 mmHeigth: 230 mmWheelbase: 465 mm
Genuine FG spare/option part. The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The thickness of the body shell is 2.0 mm and fits for Sportsline models. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mmContents:1 set
Genuine FG spare/option part. The body kit consists of the main body part and partial front spoiler. The body is yellow painted. Required body mounts:Mount front: FG 7020/11 Front bumper Side body mount front: FG 7012 Body mounts Side body mount rear: FG 3014 Body mounts Rear body mount: FG 7155 Rear body mountMeasures:Length: 780 mmWidth: 392 mmHeight: 280 mmWheelbase: 510 mmContents:1 piece
Genuine FG spare/option part. The body kit consists of the main body part and partial front spoiler. The body is painted. Required body mounts:Mount front: FG 7020/11 Front bumper Side body mount front: FG 7012 Body mounts Side body mount rear: FG 3014 Body mounts Rear body mount: FG 7155 Rear body mountMeasures:Length: 780 mmWidth: 392 mmHeight: 280 mmWheelbase: 510 mmContents:1 piece
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm
Rare itemFord Capri Zakspeed RS 1/5 top quality body shell set, fits 1/5 touring cars with a wheelbase of 530mm.The body shell set includes main section, front air dam, rear section, rear wing and a pair of rear wing brackets with all necessary screws. The set is delivered with RS Zakspeed painted. Required body mounts: Rear side: 9014 FG Body mounts Front side: 3014 FG Body mounts Rear: 2x 7152/01 FG Extended rear mount Front pumper: 7020/14 FG Front bumper Front: 2x 7155 FG Body mount short adjustable Dimensions:Length: approx. 940 mmWidth front: approx. 390 mmWidth rear: approx. 415 mmHeight: approx. 230 mmContent:1 set
Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is painted and decorated with stickers. Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piece
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. With rear spoiler and fitting set.
Genuine FG spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmContents:1 piece
The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase. The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. painted Audi TT body shell by MCD with decals set applied. The body shell is an exhibition piece and shows several signs of use like a big paint burst and spilled glue on the front. Otherwise rather small scratches. Dimensions:Wheelbase: 520 mmWidth: 380 mmLength 860 mmHeight: 270 mm
Suitable for 2WD models with a 535 wheelbase, such as FG, Carson and almost all other 1:5 touring cars. The body was deep-drawn from 2 mm thick Lexan. See photos for condition and drillings. Due to the low height of the body, the flatter airbox from FG with order number 9043 is required. Completely painted body for the 1:5 wheelbase 530/535 mm. With rear spoiler, wing mirrors and decal set. Body supports required:
Front part: FG 7020/14 Front bumper Rear carrier: FG 7155 Rear body support Front side: FG 3014 Body support
Rear side: FG 3014 Body mount
Contents 1 piece
The body is cut out, painted but not drilled to fit all 1/5th scale (wheelbase 530/535 mm) touring cars. Samba has decided to produce a new touring car body to offer a new car from the WTTC series for the 1:5 drivers. Currently the most requested big scale body with optimal aerodynamics
1.5 mm material thickness. This is offered without a rear spoiler.The body consists of one part.
Width front / rear: 392 mm. Contents:
1 pieceSee photos for scope of delivery and paintwork.
Genuine HT spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included.The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm/ul>Contents:1 piece
Genuine HT spare/option part. Fits chassis with 535 mm wheelbase, standard touring car width. Set of flaps included. The body shell is vac-formed from 2 mm Lexan.This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 530/535 mm wheelbase.Set contains:FG 4149 Body shell A4: 180,-- EURFG 4153/01 Car decals: 24,90 EURFG 4153/02 Window masking: 6,55 EURy0683 Big decals Jägermeister: 22,90 EURSurcharge Jägermeister painting + glueing the decals: 163,20 EURRegular price: 397,55 EURRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mmContents:1 piece
The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan. This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 535 mm wheelbase, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase.Set contains:FG 8180 Body shell set BMW M3 ALMS - 219,95 EURFG 8185/01 Vehicle decals BMW M3 ALMS - 50,50 EURy0683 Large Jägermeister decals - 29,90 EURSurcharge Jägermeister painting + glueing the decals - 195,90 EURRegular price: 496,25 EURThe set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeight: 260 mmWheelbase: 530 mm
The legendary sports car Bugatti EB 110 body shell for 1:5 on-road cars with standard chassis width and 530/535 mm wheelbase. The body shell is vac-formed from 2 mm Lexan.Painted lexan body shell; thermoformed from 1.5 mm material. The body is cut and drilled, thus suitable for 530mm wheel base.Dimensions:Total length approx. 870 mmTotal width approx. 380/385 mmTotal height approx. 220 mmRequired body mounts:Mount front: FG 7020/14 Front bumper Rear body mount: FG 7154/01 Rear body mount Side body mount front: FG 8013 Body mounts Side body mount rear: FG 3014 Body mounts The body support FG 7154/01 is screwed directly onto the rear bridge. For attachment to the rear bridge, 2 holes 4 mm must be drilled in them.As a detailing kit (mirrors, windshield wipers!) set # 5435 is recommended (not included!).Since the Bugatti EB 110 1:5 scale body is - just like the original very low, a very low height air filter (#9043) is required. We also recommend 9.5 mm wide wheel squares: #6107 wheel squares 9.5 mm/M6 - 2pcs.For the body side support #32781 is requires, as is #2152/02 for the rear
Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm
€219.90*
This website uses cookies to ensure the best experience possible. More information...