Wheel Squares and accessoires
The special tool for Lightscale wheel nuts is simply inserted into the end of a spark plug wrench and is secured there by use of an o-ring. With its 3 hardened pins the tool locates into the wheel nut and may be used to tighten or untighten it. The tool is universally usable for all Lightscale wheel nuts.The kit contains the tool as well as the o-ring and hardened pins. The tool comes ready for use. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Genuine Lightscale spare/option part.Square Hub with additional steel pins to secure wheels from damage due to turning on the hub.The Lightscale Diamond square hub is reduced to the maximum possible weight saving but serves even better lining and stiffness for the wheel and the brake disc. Furthermore the hub is slightly conical to its outside which makes mounting the tires easier especially in hectically racing situations.The Diamond is available in 11,5, 12 mm and 14,5mm width and fit all common known brands such as FG, RS-5, H.A.R.M. or Contrast and many more as well as all kinds of cars like on road, off road or Formula 1.Contents:2 pieces
Wheel nut front for F1 Cars using M6 Thread on the axle.The Lightscale wheelnut is used in combination with the Lightscale lexan disc to convert F1 rims to an up to date and modern look.Thereby the Lightscale wheel nut works just like a real one in present f1 racing. It is tightened with a 22 open end spanner or socket wrench. Alternatively one may use the special Lightscale tool to tighten or loosen the wheel nut.Due to the use of rifled and conical washers a locking effect is achieved.The kit contains 2 wheel nuts as well as 4 rifled conical washers.Optional parts: Tool for Lightscale wheel nuts item code 50100000, Lightscale lexan disc item code 51009500 and spare rifled conical washers item code 881200058801. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.