Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:2 pieces
Genuine GPM spare/option part. GPM aluminum lower hinge pin brackets rear axle for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. With this set, the multi-part front bracket is replaced by a one-piece design with plastic bushings.(Replaces original sets ARA330555, ARA330588 and ARA330557)Contents:2 pieces
Genuine GPM spare/option part. GPM gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.Fits front and rear.(Direct replacement for original set ARA310935)Contents:1 set
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set
Genuine GPM spare/option part. GPM rear uprights for Arrma Kraton / Outcast 8S, CNC machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with a more secure fit for the ball bearings.Comes complete with wishbone pins and screws (directly replaces original sets ARA330565, ARA330564 and ARA723430)Contents:2 pieces
Genuine GPM spare/option part. GPM chassis strut front for Arrma Kraton (version 1 and 2) / Outcast 8S, one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original strut ARA320550 with heads ARA320477).Contents:1 piece
Genuine GPM spare/option part. GPM front shock tower for Arrma Kraton 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320475.Contents:2 pieces
Genuine GPM spare/option part. GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320476.Contents:1 piece
Genuine GPM spare/option part. GPM center gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.(Direct replacement for original set ARA310930)Contents:1 set
Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set
Genuine GPM spare/option part. GPM steering assembly for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum and with 8 ball bearings. More torsion-resistant, less slack and friction than with the standard plastic parts.The scope of delivery includes replacements for original parts ARA320474, ARA340153, ARA340160 as well as ball bearings and screws.The standard steering posts ARA340159 will be re-used!Contents:1 set
Genuine GPM spare/option part. This 6061T6 aluminum conversion kit from GPM replaces the rear camber rods on the Arrma Kraton / Outcast 8S with a fully adjustable a-arm. The triangle created by sturdy stainless steel turnbuckles provides more stability, but still allows some flexibility thanks to ball joints at all mounting points. A solid mounting plate creates the additional mounting points on the chassis.Contents:1 set
Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces
Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces
Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces
Genuine GPM spare/option part. All-metal steering rods from GPM made of 6061T6 aluminum and stainless steel for Arrma Kraton / Outcast 8S. Thanks to clamping device on the ball cups, no lock nuts are required.Contents:1 set
Genuine GPM spare/option part. GPM CVD drive shafts for Arrma Kraton / Outcast 8S, completely made of hardened steel; fits front and rear.These are complete drive shafts, including wheel shafts and CVD center parts. (Replaces original sets 2x ARA310926, 1x ARA310932 and 1x ARA310933)Contents:2 pieces
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:1 set
Genuine GPM spare/option part. Milled 6061T6 aluminum differential case from GPM for Arrma Kraton / Outcast 8S. Fits front and rear application.Contents:1 pieces
Genuine GPM spare/option part. Servo saver machined from 7075 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part.Fits servos with 15T spline shaft.Contents:1 pieces
Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces
€64.90*
This website uses cookies to ensure the best experience possible. More information...