7472 FG Tuning clutch bell hardened
Genuine FG spare/option part. Case-hardened Tuning clutch bell in high quality steel. Borings for cooling and a reinforced outside diameter ensure shape stability at high speed. Suitable for all 1:5 and 1:6 models except Formula 1.Shaft 10 x 38 mmFlat sections for set screws with 90° offsetContent:1 piece
7472/01 FG Tuning clutch bell hardened, 1 pce.
Item N° 7472/01 Tuning clutch bell hardened, 1 pce.Case-hardened clutch bell made of hard andtough steel, without cooling hole, therefore suitablefor Off-Road Buggies.
7473/02 FG Engine flange for engine quick mount - 1 piece
Spare part for FG .Outer diameter engine flange 64 mm.
7474 FG Alloy gear plate 97 for 2WD and 4WD
Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece
7475 FG Alloy ball-and-socket joint for 1:5 Truck
Genuine FG spare/option part. Alloy ball-and-socket joints with surface coating, 70% less weight.Contents:10x 7475/014x 7475/022x 7475/032x 7475/04
7475/01 FG Alloy ball-and-socket joint Ø5/10x15mm - 2pcs.
Alloy ball-and-socket joints with surface coating, 70% less weight.
7475/03 FG Alloy ball-and-socket joint Ø10x9,5mm - 2pcs.
Alloy ball-and-socket joints with surface coating, 70% less weight.Bore diameter 4 mm
7475/04 FG Alloy ball-and-socket joint Ø10x13mm - 2pcs.
Alloy ball-and-socket joints with surface coating, 70% less weight.Bore diameter 5 mm
7475/05 FG Alloy ball-and-socket joint Ø10x15mm - 2pcs.
Alloy ball-and-socket joints with surface coating, 70% less weight. Bore diameter 4 mm2 pieces
7475/06 FG Aluminium joint ball with covering disc Ø4/10 x 15,5 mm
Genuine FG spare/option part. Joint ball for the plastic joints of the track rods of all FG models. The plastic joints are subject to wear after longer use or use under dusty conditions. The clearance between ball and joint increases, a re-adjustment of the joint is no longer sufficient. In case of a crash it is possible that the joint jumps off. This joint ball prevents a jumping off of the plastic joint.Content:1 piece
7478 FG Rear alloy upright lengthening
Genuine FG spare/option part. The lengthening of the alloy uprights stiffen the negative inclination of the rear wheel. Use only in connection with alloy uprights 6477 or 6478Not recommended for installation in offroad cars.
7478/01 FG Rear alloy upright extension - 1pce.
Spare part for FG 6478/02.1 pieces
7482/02 FG CFRP rear wing for 7482/01 - 1pc.
Original FG spare part for 7482/01.Material carbon Dimensions: - Length 240 mm - Width 60 mm
7482/03 FG Carbon rear wing bottom part for 7482 - 1pce.
Item N° 7482/03 Carbon rear wing bottom part for 7482 - 1pce.Spare part for .Width 270 mmDepth: 57 mm
7486 FG Alloy engine mount big 1:5 for Zenoah/Solo
Genuine FG spare/option part. CNC-cut alloy engine mount for all FG 1:5 and 1:6 Truck models with horizontal engine ahead as Zenoah ZG22, G230RC, G260RC, FG CY23 and CY26.Bearing seat 19 x 7 mm.Contents:1 piece
7492 FG Rear spring deflection limiting - set
Suitable for all FG 1:5 touring cars and Race-Trucks except Evo.
7493 FG Spring deflection limiter front with body mount
Genuine FG spare/option part. Contents:1 piece
7495 FG Volume compensation for engine - set
Through mounting the volume control you achieve a power increase in the lower speed range. Further advantages are a spontaneous gas reduction and a lower fuel consumption. Suitable for all 1:5 models, 1:6 Race-Trucks, Formula 1 and the Off-Road models Leopard and Beetle.
7495/02 FG Spring - 1pce.
Spare part for .Length 214 mmOuter diameter 30.5 mmWire diameter 1.2 mm
7495/05 FG Hose long/short - 2pcs.
Spare part for .One each:ID 6 mm x L 80 mmID 6.5 mm x L 200 mm