Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

68405 FG Alloy differential 4WD complete

Product information "68405 FG Alloy differential 4WD complete"

Genuine FG spare/option part. 

Precise, solid and reliable, for use at competitions, not adjustable.

Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.

Content:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

8505 FG Mounting tool for bevel gear wheels - 1pce.
We essentially simplyfied the inserting of the differential bevel gear wheels with the mounting tool. Through the exact positioning of the bevel gear wheels it is guaranteed that the differential bevel wheel axle and the differential driving axle are in true alignment from the beginning.

€7.90*

Average rating of 0 out of 5 stars

y0809 Klüber high performance grease for differentials
Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

Customers also bought

Average rating of 0 out of 5 stars

66257, FG Plastic thrust disk l/h front 4WD,1 pce.

€9.50*

Average rating of 0 out of 5 stars

66258, FG Plastic thrust disk r/h 4WD, 1 pce.

€9.50*

Average rating of 0 out of 5 stars

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

Average rating of 0 out of 5 stars

68252, FG Gilmer belt pulley 12 teeth 4WD, plastic
Genuine FG spare/option part. Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

7342/08 FG Cylinder shroud B for Zenoah G230/260
Genuine FG spare/option part.Contents:1 piece

€23.90*

Average rating of 0 out of 5 stars

7336 FG Insulator for Zenoah / CY Fuelie
Genuine FG spare/option part. For Zenoah G230/G240/G260/G270/G290Height: 17,5 mmContent:1 piece

€23.00*

Customers also viewed

Average rating of 0 out of 5 stars

8484 FG Alloy differential for 1:5 and 1:6 conversion kit
Genuine FG spare/option part. The conversion kit includes all parts needed for a conversion from a standard plastic differential to a non-adjustable alloy differential.Content:1 set

€99.99*

Average rating of 0 out of 5 stars

8501/05 FG Alloy differential self-locking fourfold
Genuine FG spare/option part.In order to be able to transfer even more power and torque on to the rear wheels we distributed the valve effect over 4 friction disks by this quadruple self-locking differential gear.Suitable for all 1:5 models, Trucks, Formula 1 and Leopard.Please note: The differential comes unassembled, we recommend assembly tool: 8505 FG for bevel gear installation.Contents:1 set

€219.00*

Average rating of 0 out of 5 stars

68408 FG Front axle free wheel for 4WD
Genuine FG spare/option part. The advantage of a one-way clutch over conventional or limited slip differentials is the combination of maximum propulsion and outstanding agility in the turns. This results in a 4WD vehicle with the quick turning-in of a 2WD while retaining the advantages of 4WD traction when accelerating out of corners.This applies to offroad and street cars alike.The inner races in the one-way clutch feature the internal spline drive to accept FG differential shafts. They are made of high strength steel, hardened and ground to very close tolerances. Combined with the large one-way clutches, this guarantees the transfer of the high maximum torque.Installation is pretty easy; the one-way clutch unit replaces the bevel gears in the diff including the satellite gear shaft and is inserted as a single piece into the differential case. You just have to take care that the side where the writing on the clutch can be seen goes to the left hand side (in the direction of travel).Fits FG-plastic differential case and HT- or FG-aluminum cases for non-self-locking differential versions.For vehicles not equipped with in-wheel brakes it should be noted that there will be no more braking action in front from the layshaft brake when running the one-way clutch as a front differentialOnly for 4WD models. Suitable for all differential housings except viscous and Powerlock diff.Contents:1 piece

€135.95*
%

Average rating of 0 out of 5 stars

y1587 Conversion kit to electric drive for Carson Wild Attack and HPI Baja 5B
The conversion kit contains all mechanical parts (no electric motor, esc and batteries) you need to convert a Carson Wild Attack or HPI Baja 5B to electric drive.Brushless motors from all common manufacturers with 56 - 58 mm diameter, about 100 - 115 mm motor can length, 700 - 850 KV and 8 mm output shaft will fit. We recommend the TT56112/700 Top Tuning Monster Brushless Motor 700 kV.For the esc,ZTW Beast 200A or other ESCs with similar dimensions and performance data are suitable.The battery box provides a total space of 180 x 84 x 50 mm for the batteries. Operation with 6S - 8S is recommended.The set contains: Battery and receiver box Complete aluminum motor mount Ball bearing for intermediate shaft Motor pinion Chassis struts and mounting plate for esc made of aluminum Extension cable for speed controller installation hardware Exploded view and assembly instructions

€256.40* €269.90* (5% saved)

Average rating of 0 out of 5 stars

2012-208 Mecatech Servosaver rod M4/53 mm
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€12.90*

Average rating of 0 out of 5 stars

6745 FG Shim ring 10x16x1mm - 10pcs.
Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€5.30*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-510 Electro Porsche GT3 RSR up to 200A/8S
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled.According to the installed fourwheel drive the models are easy to handle and to steer. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. The models can be steered easily and smoothly thanks to the built-in all-wheel drive. The control can be regulated simply via transmitter or optionally via the program card. T2M standard equipment brushless motor and ESC:  - ESC 150A controller 6S  - Brushless motor 6SYou can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu.RTR equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

From €1,199.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency