FG TR2/TR4 body from our showroom, ready painted. The rear holes for the body mounting are double drilled. See photos for scope of delivery and condition. 1 piece
The last BMW E46 1:5 body for 535mm wheelbase.Attention: This is the main body part. For decorative purposes, the body was glued from the inside. Adhesive residues should be removed as far as possible. The rear window has already been roughly cut out. (see pictures!)Required body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm
The body is made of white polycarbonate. The decal set and front section are included in the price! The body is from our showroom and is already covered with decals. The holes for the rear chequered brackets are drilled twice. Length: 660 mm Width: 290 mm Height: 195 mm Wheelbase: 460 mmCondition and scope of delivery see photos.
Original Losi replacement/tuning part.Unfortunately, the front and rear parts are no longer available from the manufacturer.However, the main Losi Mini body part can also be mounted on a Losi 5ive-T without the front and rear parts. In our shop pictures and the action video you can clearly see that only the Losi Mini main part (i.e. without front and rear parts) can be adapted to the Losi 5T in a visually appealing way as a rally version.Offered here is the version of the Mini adapted for the Losi 5T, in used and with a grilled windshield for optimal engine cooling, as well as laterally adapted mounting brackets and aluminum reinforcement in the rear area for the exhaust.Dimensions:- Width above the wheels: approx. 470 mm- Width in the middle: approx. 430 mm- Length: approx. 930 mm
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. painted Audi TT body shell by MCD with decals set applied. The body shell is an exhibition piece and shows several signs of use like a big paint burst and spilled glue on the front. Otherwise rather small scratches. Dimensions:Wheelbase: 520 mmWidth: 380 mmLength 860 mmHeight: 270 mm
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. Body mounts need to be customized depending on the model. The body is untrimmed and unpainted.
Suitable for 2WD models with a 535 wheelbase, such as FG, Carson and almost all other 1:5 touring cars. The body was deep-drawn from 2 mm thick Lexan. See photos for condition and drillings. Due to the low height of the body, the flatter airbox from FG with order number 9043 is required. Completely painted body for the 1:5 wheelbase 530/535 mm. With rear spoiler, wing mirrors and decal set. Body supports required:
Front part: FG 7020/14 Front bumper Rear carrier: FG 7155 Rear body support Front side: FG 3014 Body support
Rear side: FG 3014 Body mount
Contents 1 piece
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. New body with paint defects.
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. The Set contains the front body, the main body. The body shell is vac-formed from 2 mm Lexan. This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 535 mm wheelbase, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase.The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7012 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeight: 260 mmWheelbase: 530 mm
Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm
Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm
Genuine HT spare/option part.Body shell has a 5 cm long crack at the rear. Otherwise the body shell is completely new and has never been driven before.Fits 535 mm wheel base, current touring car width. A rear wing is available through the shop's options menu. The body shell comes without decals!Required body mounts:Front section: FG 7020/11 Front bumperRear body mount: FG 7152/01 Rear body supportSide front: FG 7012 Body mountSide rear: FG 7014 Body mountAvailable decal sheets:y1329 - Vehicle decalsy1320/01 - Team decals Posty1329/02 - Team decals Samsungy1329/03 - BMW-Bank decalsy0683 - Jägermeister decalsy3006 - rc-car-online decalsDimensions:Length: 885 mmWidth: 392 mmHeight: 260 mmWheel base: 530 mm
Decal sheet is attached. Body shell series is in mint, good condition!Delivered without roll cage!Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware
€179.00*
This website uses cookies to ensure the best experience possible. More information...