Maxi-Pin 1/6 offroad competition tire, mounted and glued
Product number:
maxipin_geklebt.1
EAN:
4058575027768
Product information "Maxi-Pin 1/6 offroad competition tire, mounted and glued"
Genuine HT spare/option part.
The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting.
The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"!
Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surface
increased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.
Content:
Prices of the components:
Total EUR 78.80
Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.
Contents:
2 pieces / 1 pair
The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting.
The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"!
Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surface
increased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.
Content:
- Diameter: 155 mm
- Width: 67 mm
Prices of the components:
- Maxi-Pin tires: 39,90 EUR / pair
- Maxi-Pin tire inserts: 9,90 EUR / pair
- Rims FG 6105/01: 14,90 EUR / pair
- Glue set y0067: 13,30 EUR
Total EUR 78.80
Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.
Contents:
2 pieces / 1 pair
Login
Customers also bought
maxipin_geklebt Rubber compound:
hard y1232
Genuine HT spare/option part. The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surfaceincreased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.Content:Diameter: 155 mmWidth: 67 mmPrices of the components:Maxi-Pin tires: 39,90 EUR / pairMaxi-Pin tire inserts: 9,90 EUR / pairRims FG 6105/01: 14,90 EUR / pairGlue set y0067: 13,30 EURTotal EUR 78.80Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.Contents:2 pieces / 1 pairAlso suitable for:With the following wheel adapter: y1183 Rim adapter
y0521 Version:
y0521 - for M6 wheel shafts
Genuine HT spare/option part.This adaptor allows you to install all MadMax/HPI tire/rim combinations on FG, Carso, Smartech 2WD/4WD and other cars with the same wheel shaft configuration. Losi 5ive tires can be used as well, but they hey have to be mounted on MadMax/HPI rims because Losi rims are too thick at the center. The adapter is drilled for 8 mm wheel shafts (FG, Smartech/Carson and many more!), hex size of wheel drive and wheel nut is 24 mm hex with M18x1.0 thread (same as HPI).Please note:FG wheel shafts come with either M6 or M8 thread size. It can even happen that a vehicle has different thread sizes front and rear! Therefore, please make sure which version is required before placing an order.Converting your car takes only a couple of minutes with this easy to install adaptor. just see picture "installation instruction" for a schematic installation.Contents:2 pieces
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces
Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.
Genuine FG spare/option part. Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).Rim with 18 mm square driveDimensions:Diameter: 120 mmWidth: 61 mmContents:2 pieces / 1 pair
Genuine FG spare/option part.Plastic gear plate for single disc brake (off road version). Bearing seats clutch bell: 22 mm x 6 mmBearing seat layshaft: 19 mm x 7 mmContents:1 piece
Similar products
Item N° 06407/05 Mini pin M / OR tires, glued, white, 2 pcs.Spare part for the Leopard 2010 2WD/4WD versionThe new FG Mini Pin tires are designed for harder grounds. They grant the model a lot of stability and tremendous grip in curves. 153 mm diameter64 mm wideThe version M is suitable for cooler temperatures lower than 20°, die version H is for temperatures over 20°. The tires are glued ready to run on the widened 1:6 wheels.These wheels are suitable for the FG Marder, Beetle, Off-Road Buggy and the monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
maxipin_geklebt Rubber compound:
hard y1232
Genuine HT spare/option part. The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track?s surfaceincreased tire wear may be expected. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.For wet conditions the soft compound is recommended, under normal condition the medium compound is usually your best choice.Content:Diameter: 155 mmWidth: 67 mmPrices of the components:Maxi-Pin tires: 39,90 EUR / pairMaxi-Pin tire inserts: 9,90 EUR / pairRims FG 6105/01: 14,90 EUR / pairGlue set y0067: 13,30 EURTotal EUR 78.80Ready mounted and glued 69,90 EUR / pair. Rim with 18 mm square drive.Contents:2 pieces / 1 pairAlso suitable for:With the following wheel adapter: y1183 Rim adapter
Ultragrip 170x80 and 170x60 on black MadMax Extreme rims with 20 beadlock screws, with 18 mm square socket and reinforced silver headlock rings for FG, Smartech and many more. 150 shifted long lugs and a central, 4 mm high ridge on the 60 mm wide front tire, and 210 pieces of square 6 x 4 mm studs on the 80 mm wide rear tire ensure optimal propulsion! The flattened profile structure of the rows of knobs reduces the directional control and guarantees an exceptionally good on-center feel! This makes the car less prone to unwanted traction rolls! Due to the extreme load created by the MadMax Ultragrip tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. The GPM Ultragrip are designed for use on sandy surfaces.We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel drive Regular price EUR 177,40The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
Item N° 67210/05 Mini Pin M / OR tires, Leo wheel white, glued, 2pcs. Completely new revised and in important details improved Mini Pin Off-Road tires. The rubber material is more wear resisting, grip and traction were improved and the tire wall was reinforced to prevent a tearing of the rubber. The tire inserts are now stronger and therefore more wear resistant. The FG Mini Pin tires are especially well-suited for hard and rough ground. They give the model a lot of traction, driving stability and grip in curves. We recommend the M and S version in the front and the rear. The H version with slightly less grip can be used for the front axle.The tires are ready glued on the new Leo wheels. For the assembly you need the 12mm square wheel drivers (Item-no.: FG 6107/07). The glued tires are not suitable for the FG models Marder, Beetle, Off-Road Buggy and Monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Item N° 67214/06 Mini block H / OR tires, glued, white, 2pcs.Completely new revised and in important details improved Mini Block Off-Road tires. The rubber material is more wear resisting, grip and traction were improved and the tire wall was reinforced to prevent a tearing of the rubber. The tire inserts are now stronger and therefore more wear resistant. The FG Mini Block tires are especially well-suited for slightly loose and humid ground. We recommend the M and S version in the front and the rear. The H version with slightly less grip can be used for the front axle. The Mini Block tires are also well-suited as front tires for 2WD models in combination with the Mini Pin tires on the rear axle. The tires are ready glued on the new Leo 1:6 wheels. For the assembly you need the 12mm square wheel drivers (ItemN°. 06107/07).Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The glued tires are not suitable for the FG models Marder, Beetle, Off-Road Buggy and Monster models.
grp_w70 Rubber compund:
Extra Soft - GWH70X
Item N° GWH70 GRP 1:6 Buggy "CUBIC" tire glued, 2 pcs.fine lug treadvery good directional stabilitylow lateral tractionmoderate propulsionfor hard packed surfaceTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.
Complete set of four CRT stadium tires and rims, mounted and glued with tire inserts. Fits FG and Carson 1/6 scale cars.Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Also suitable for:With the following wheel adapter: y1183 Rim adapter
The Maxi-Pin competition tire is particularly suitable for tracks with a hard packed surface, as well as for tracks with a higher percentage of carpeting. The tread is not extended into the tire?s sidewall to reduce the side bite of the Maxi-Pin tire; the car remains controllable on such challenging tracks, which makes this tire a must-have for your "tire box"! Since the Maxi-Pin tire has many fine pins for a high number of biting edges and a low tread depth for reduced flex work, depending on the track's surface increased tire wear may be expected.Unit pricesOne pairMaxi-Pin tires39.90 EUR79.80 EUROne pairTire inserts9.90 EUR19.80 EUROne pair32482 Buggy rim14.90 EUR29.80 EUR64.70 / 129.40 EURDimensions:Diameter: 155 mmWidth: 67 mmInner diameter: 106 mm
%
Off-road tires for sandy underground! Gives great results on those carpets which are typical for some off-road tracks. 462 grippy square studs per tire, a total of more then 1800 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability! Therefore the car is less prone to undesirable side rolls! The rim is the 6-spoke design with a steel reinforcement ring around the wheel drive. The NARROW-GRIP tires are available with either 18 mm square drive to fit FG & co. To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the square or hex drive and completely mounted via tightening the wheel nut! Dimensions:Outer tire diameter: 175 mmTire and rim width: 62 mmRim inner diameter: 119 mmWeight for one tire: 375 grams / for a pair: 750 gramshe manufacturer of the Narrow-Grip 462 indicates that the use of these tires on very heavy models, like the Losi 5ive-T under heavy conditions, such as jumps and shifting / tilting of the chassis, may lead to breakage of spokes or hex socket. Due to this notice that kind of failure will not be compensated. We apologize for this note!As an alternative, we recommend our special offer for the Losi 5ive-T OEM tires and in particular all tire combinations with MadMax EXTREME rims for FG, Smartech and Co.:y1400/01 - Tarmac Bustery1401/01 - Big Digger y1402/01 - Cross Bond y1403/01 - Over Lander y1404/01 - Giant Grip y1416/01 - Ultra Grip Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (18 mm square for FG Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. Wheels drives:18 mm square for FG & co.Contents:2 pieces / 1 pair
grp_gwk70 Rubber compund:
Medium - GWK70B
Item N° GWK70 GRP 1:6 Buggy "CUBIC" tire glued on yellow rims, 2 pcs.fine lug treadvery good directional stabilitylow lateral tractionmoderate propulsionfor hard packed surfaceTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.
Genuine FG spare/option part.With a Ø of 185mm extremely large and 85mm wide OR Truggy tire. Glued on new Truggy rim. A lot of grip, therefore high curve speeds on almost every surfaces possible. Available in different hardnesses. Suitable for all FG Buggy and Monster models. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.
Item N° 67214/05 Mini block M / OR tires, glued, white, 2pcs.Completely new revised and in important details improved Mini Block Off-Road tires. The rubber material is more wear resisting, grip and traction were improved and the tire wall was reinforced to prevent a tearing of the rubber. The tire inserts are now stronger and therefore more wear resistant.The FG Mini Block tires are especially well-suited for slightly loose and humid ground. We recommend the M and S version in the front and the rear. The H version with slightly less grip can be used for the front axle. The Mini Block tires are also well-suited as front tires for 2WD models in combination with the Mini Pin tires on the rear axle. The tires are ready glued on the new Leo 1:6 wheels. For the assembly you need the 12mm square wheel drivers (ItemN°. 06107/07).The glued tires are not suitable for the FG models Marder, Beetle, Off-Road Buggy and Monster models.
Customers also viewed
Genuine FG spare/option part. New universal multi off-road pin spike tire equipped with 540 full and 300 hollow pins. This new concept provides more grip, precise control and longer tire life.The new tyre shape also ensures better suspension and optimum response on the track.The tire comes in four rubber compounds:SS Rubber for use at outside temperatures between 0° and 15°S Rubber for use at outside temperatures between 0° and 20°M Rubber for use at outside temperatures between 20° and 35°H Rubber especially for use on carpet and astro turfThis rubber is radically different from other types and also ensures a totally different reaction of the tire on the track.The extremely high grip level and the optimal steering behaviour of the tire set new standards on the track.Without tire inserts!Contents:2 pieces
Glued on robust 6-spoke star wheels, with 6 ribbed reinforcement bars.With 18 mm wheel square, suitable for most 1:5 / 1:6 RC cars, FG, Carson, etc.Lane widening with 23 mm countersunk nut and 14 mm deep square drive for most models.450 block sections 3.5 mm thick, provide a good grip, even on hard or slippery surfaces.Due to the high-strength 14 mm tire shoulder, the cornering power of the Rallye-Cross 450 is high, despite the high profile of 3.5 mm, but without provoking a disproportionate overdrive of the model.The large inner diameter of 114 mm the rim, as well as the position of the wheel allows on nearly all models to eventually mount a disc brake at the front, as well as rear wheels. The dimension of the inside edge of the rim to the wheel is 20 mm. The 18 mm, 6-braced wheel square of the Rallye-Cross 450 rim is 8 mm deep.Measures of the Rallye-Cross 450 wheel/rim:Outside diameter: 162 mmProfile width: 62 mmRim inside: 114 mmTire shoulder: 14 mmBlock profile: 3,5 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapterWith the following wheel adapter: y0786 Rim adapter
y0580_02 Rubber compound:
1 pair each of M and S
Kit contents:1 pair each of mounted and glued Mammoth Supergrip Front H or M for the front and M or S for the rear.These combinations are recommended for the recreational driver. Glued on FG Leopard Race rims, fits all FG, Smartech, Carson and many other cars. Or for the ambitious driver:Choice of 2 pairs H = hard, M = medium, S = soft or super soft = SS!The softer the compound the more grip the tire will provide, but the harder the compound the longer the tire will last (as in the original Formula 1!) With the same compound for front and rear axle even a 4WD car requires better driving skills! As the saying goes: It turns better ;-) But chances are that you will also produce a more or less gallant spin out every now and then! Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. It is known that any driver has his own preferred combination! The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. Measures:Width: 64 mmDiameter: 153 mmAlso suitable for:With the following wheel adapter: y1183 Rim adapterWith the following wheel adapter: y0786 Rim adapter
%
Genuine Losi 5ive-T 2.0 spare/option part.Some of our customers order their Losi 5ive-T 2.0 with with optional MadMax rims and tires. Therefore we currently have an excess stock of genuine Losi 5ive-T 2.0 tire sets, that we can offer you at an extremely low price Complete mounted and original Losi 5ive-T 2.0 tires.Consists of parts from the following genuine Losi 5ive-T 2.0 sets: LOS45022 Losi Wheel & Beadlock Set, Grey, 5ive-T 2.0 LOS45023 Losi Tire Set, Firm, 5ive-T 2.0 LOSB7241 Tire Inserts front/rear, Soft One pair (two pieces) of complete OEM wheels, as it comes with the Losi 5ive-T 2.0; one each l/h and r/h version. In our shopping selection 2 pairs at a special price! Regular price for this set: 143,95 for two piecesDimensions:Width: 70 mmDiameter: 180 mm24 mm reinforced Wheel hex (Losi and HPI and other)Contents:2 pieces / 1 pair
Genuine Traxxas spare/option part. X-Maxx® black wheels, Maxx® AT tires, foam insertsX-Maxx assembled and glued Maxx AT 8.0x4.0" tires, foam inserts, and black wheels. Package includes (1) left and (1) right side tire and wheel assembly.Dimensions: Width: 100 mm Diameter: 205 mm 24 mm Hexwheel drive Contents:2 pieces