3105/02 FG Rim 1:6 silver

€29.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_3105_02

EAN: 3410564529843

Product information "3105/02 FG Rim 1:6 silver"

Genuine FG spare/option part.

Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).

Rim with 18 mm square drive

Dimensions:

Diameter: 120 mm
Width: 61 mm

Contents:

2 pieces / 1 pair

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

3106 FG Wheel extension silver

Genuine FG spare/option part. Required for installation of wide tires. Suitable for 3105/01 and 3105/02.Dimensions::Diameter: 120 mmWidth: 27 mmContents:2 pieces

€14.90*

3108 FG Front rim insert Trucks

Genuine FG spare/option part.Required for scale rim appearance.Suitable for FG no.: 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContents:2 pieces

€19.90*

3109 FG Rear rim insert Trucks

Genuine FG spare/option part. Required for scale rim appearance. Suitable for 3105/02.Dimensions:Outside diameter: 100 mmInside diameter: 25 mmContent:2 pieces

€19.90*

y0440 HT Rim reinforcement for FG rim 6105, 6105/01 and 3105

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Off-Road rims 6105, 6105/01 (white) and 3105 (silver).14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€24.90*

Similar products

4412 FG Driveshaft boots

Genuine FG spare/option part. Suitable for all FG models and other. To complete one car you need two sets.For 2WD models you need two sets and for 4WD models you need four sets.Contents:2 pieces

€19.90*

4411/06 FG bearing set with grease filling EVo/Competition

Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€35.95*

3262/01 FG Vehicle decals set CAT-Truck

Genuine FG spare/option part.Contains the stickers of the headlights, the rear lights and the radiator grill.Not included are the advertising labels for the original design. Please order separate.Dimensions:435 x 145 mmContents:1 piece

€16.10*

4173/01 FG Vehicle decals Audi R8 LMS

Genuine FG spare/option part. Contains the vehicle specific decals for an original appearance.Contents:1 set

€49.50*

3438 FG Body detailing kit Truck

Genuine FG spare/option part.Contents:1 set

€19.90*

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

3152/01 FG Extended rear mount Trucks

Genuine FG spare/option part. Rear body mount, bolts to rear shock stay. Suitable for Atego and Mercedes Benz 1834.Dimensions:Total length: 65mmLength until body support: approx. 55mmContents:1 piece

€15.50*

3259 FG Body set Street Truck 4WD

Genuine FG spare/option part. Former: "MB 1834" Truck. The set contains the main body, the driver's cab, the driver's cab side parts and the body screws.The rear bumper won't be delivered and has to be ordered separate. The set is delivered not painted.Dimensions:Length: 870mmWidth: 435mmHeight: 390mmWheelbase: 535mmContents:1 setPainting tips:

€255.50*

Details

4171 FG Front body Audi R8 clear

Genuine FG spare/option part. Contents:1 piece

€52.95*

3258 FG Rear bumper 1834/Atego

Original FG Ersatz-/Tuningteil.Suitable for 1834 and Atego body shells. Bumper is delivered not painted but inclusive the mounts.Inhalt:1 StückPainting tips:

€43.75*

4411/13 FG ball bearing set for 1/5 2WD, sealed, 14 pcs.

Genuine FG spare/option part.Fits too WB535 cars.Content:2 pieces: 10 x 19 x 7 mm2 pieces: 10 x 22 x 6 mm8 pieces: 8 x 22 x 7 mm2 pieces: 12 x 28 x 8 mm

€47.50*

4402 FG Alloy steering stop for alloy uprights

Genuine FG spare/option part. A buckling of the inner front wheel in curves becomes impossible when mounting the alloy steering stop.Suitable for 6103/05, 6103/06, 4403, 4403/01, 4404 and 4406.Dimensions:Length: 24 mmDiameter: 7 mmThread: M4 Contents:2 pieces

€13.90*

Customers also viewed

3106 FG Wheel extension silver

Genuine FG spare/option part. Required for installation of wide tires. Suitable for 3105/01 and 3105/02.Dimensions::Diameter: 120 mmWidth: 27 mmContents:2 pieces

€14.90*

6232 FG Big-Foot rim - 2pcs.

Diameter: 115mmWidth: 108mm18 mm wheel square, with reinforcement ring

€19.90*

6419/06 FG Slick tire rear S1 80mm for 1:6 models with insert - 2pcs.

Durchmesser x Breite / diameter x width 145 x 80 mm

€48.95*

FG Formula 1 Sportsline

Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00*

Configure now

5715 FG Clutch block carrier für Chung Yang

Genuine FG spare/option part. Contents:1 piece

€9.80*

3105/01 FG Rim 1:6 silver - 2pcs.

Item N° 3105/01 Rim 1:6 silver - 2pcs.Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero).Rim with 18 mm square driveBulk:Diameter: 120 mmWidth: 61 mm

€14.40*

Details

y1613 Mammoth Supergrip mounted and glued on silver FG rims

y1613 Version: Front Medium und Heck Supersoft+ 60EUR

Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.

Variants from €89.90*

€149.90*