6429/01 FG Upright front for 1:6 2WD models

€39.90*

Available

Product number: fg_6429_01

EAN: 3410564508442

Product information "6429/01 FG Upright front for 1:6 2WD models"

Genuine FG spare/option part.

Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.

Bearing seats: 22 x 7 mm.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

Accessories / Spare parts

y0932 HT Alloy front uprights for FG / Smartech

€129.90*

Similar products

6431 FG Steel pinion 16 teeth

Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

6427 FG Plastic gear wheel 46 teeth - 1pce.

46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

6425/01 FG Stabilizer front/rear for 1/6 scale models

Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€34.50*

6451/04 FG O-rings for air filter adapter 19x1,5 und 57x2,5mm - 2pcs.

These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.

€3.90*

6438/05 FG Tire insert for slicks 80 mm 1/6

Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

6441 FG Filter oil for foam filter 50ml

Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

6431/01 FG Steel pinion 16 teeth, wide - 1pce.

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

6445 FG Spring tension adjustment clips

Genuine FG spare/option part. Required for preload adjustment on FG off-road shocks.For shocks with 20 mm body diameter. Content:6 rings 5 mm wide2 rings 10 mm wide

€8.90*

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.

Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€16.90*

6494/01 Gear 62 teeth EVO monoblock

€67.50*

6452/04 FG O-ring 19x1,5mm for air filter adapter - 2pcs.

Spare part for 6452/05

€2.60*

6444 FG Air filter adapter for 6442 und 6443 - 1pce.

€17.50*

Customers also viewed

HT alloy front axles for FG, Smartech/Carson and other

alu_vorderachsen Model: y1034 FG Off-Road Buggy 2WD+ 66EUR

HT alloy front axles for FG, Carson and other, set.Available for following cars:- y0906 FG Monster / Stadium 2WD- y1033 FG Marder, Beetle, Pajero and Monster Beetle 2WD- y1034 FG Off-road Buggy 2WD- y1047 Smartech UNO, Attack, Super Attack Off-Road and C5/R5 on-road- y1048 all FG Sportsline 1/5 scale on-road- y1204 Smartech Monster Truck / Pick up Truck, Monster Beetle, Comanche, CRTThe sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower. Axles to choise:Item N°Model:Link to axle:y0906FG Monster / Stadium 2WD Item N°Model:Link to axle:y0906FG Monster / Stadium 2WDalign="center"> y1033FG Marder, Beetle, Pajero und Monster BeetleFG Marder, Beetle, Pajero und Monster Beetley1034FG Off-Road Buggy 2WD FG Off-Road Buggy 2WD y1047Smartech UNO, C5 / R5, Attack, Super Attack, GasBlaster und Touareg Smartech UNO, C5 / R5, Attack, Super Attack, GasBlaster und Touareg y1048FG Sportsline 08, Sportsline 04, Sportsline und Eco-Line FG Sportsline 08, Sportsline 04, Sportsline und Eco-Line y1204Smartech Monster Truck / Comanche, Attack Evo, CRT + CPT Smartech Monster Truck / Comanche, Attack Evo, CRT + CPT

Variants from €249.00*

€315.00*

y0932 HT Alloy front uprights for FG / Smartech

€129.90*

y0963 FG manuals set Marder Race 2WD, set

Genuine FG manual as included with the car.

€3.90*

68515 FG Tuning Conversion Kit for front and rear axle, Marder

Genuine FG spare/option part. Individual prices of the parts in the tuning set: 847,06 EurosAluminum conversion kit to aluminum front axle and aluminum rear knuckle and wishbone for FG Marder.Contents:1 set

€424.95*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C

7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90*

Configure now

y0670 HT Color Ex color remover 100 ml

Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Content: 100 Milliliter (€99.50* / 1000 Milliliter)

€9.95*