Bubble-Ex for 1/10 up to 1/5 scale rc-cars, used

€25.00*

Prices incl. VAT plus shipping costs

Available

Product number: bubbleex_gebraucht

Product information "Bubble-Ex for 1/10 up to 1/5 scale rc-cars, used"

Indispensable for optimal suspension tuning!

Vacuum container for removal of bubbles from shock fluid when filling shocks.

A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.

Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 14 to 20 mm outer diameter can be used in the Bubble Ex to be "de-bubbled".

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

Optional Speedometer DX2E ACTIVE, second-hand "as good as new"

The Spektrum™ DX2E ACTIVE™ Speedometer Module is an exclusive add on upgrade that actively displays real time MPH or KPH right in front of the driver. All that is needed is a telemetry capable receiver, such as the TM1500 Telemetry Module, and the easy to install Spektrum RPM Sensor.The Spektrum DX2E ACTIVE Speedometer Module features a simple one touch interface, allowing the driver to easily setup the speedometer and view the top speed at the touch of a button. The DX2E ACTIVE Speedometer Module is pre-configured for the Losi® TENACITY™ SCT, making it an exceptionally simple plug and play upgrade system that adds the immersion of brightly lit, heads up speedometer display to your DX2E ACTIVE Radio. And for other vehicles, setup is as simple as inserting your models motor pole count and tire roll out.1 piece, used

€18.00* €32.69* (44.94% saved)

FG 4 jaws Teflon clutch adjustable, used "2"

Fg 4 jaw Teflon clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€45.00*

Lauterbacher 3 jaw clutch adjustable for FG / Carson / HPI / Losi Modelle, used "3"

Lauterbacher clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€50.00*

10530 FG 4-block clutch 05 adjustable, used "5"

Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.-used.See photos for condition and delivery.Adjustable and in many details improved 4-block clutch.This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.

€35.00*

Toro Beast Brushless Motor 1090 kV, used

Specifications Max. Current: 195 A Max. Voltage: 27 V Max. Power: 5,200 W KV (RPM/Volt): 1090 KV Depth of the mounting holes: 8 mm Hole pattern: 4 x M4 on 30 mm bolt circle diameter each Housing diameter: 57.8 mm Housing length: 92 mm Length of shaft: 30 mm Shaft diameter: 8 mm Weight: 960g Connector plug: 8 mm diameter Connection cable: 8AWG Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 1 piece

€149.90*

5188 Mielke HOT - Power tuned pipe exhaust system losi 5T/2.0 and Mini, used.

Genuine Mielke spare/option part. "used"Scope of delivery and condition see photos.The HOT-Power tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi 5ive-T and Losi 5ive-Mini in combination with large displacement and modified engines.The elaborate, angled design in combination with the long tail pipe, makes best use of the available space in the 5ive-T and Mini, allowing for optimum performance!The outlet at the rear contributes significantly to a scale look when driving the car!When designing the system, it was especially important to maximize the distance to the battery box of the Mini / 5ive-T in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box.The tuned pipe is made of aluminum, which keeps both weight and center of gravity low.The set also includes the complete installation hardware!Contents:1 set

€119.00*

Tyre heating blankets orange for 1:5 touring car set 4 pieces

2 pairs of new orange tyre heating blankets for tyre size:Maximum 130 mm outer diameterMaximum tyre width 80 mmSo for all standard 1:5 tyres! ()Operating instructions: The tyre heating blankets may only be operated with 12 - 13.8 volt alternating or direct current. In order to achieve the best possible operating temperature, a power supply unit with 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 power supply unit is ideal here. Of course, the tyre heating blankets can also be operated directly from a 12 volt (without Powerbase) car battery. To avoid damaging the heating coil in the blankets, they must not be kinked and must not be used without tyres!Contents:1 set / 4 pieces

€120.00* €199.00* (39.7% saved)

FG tyre heating blankets for 1:5 touring car set 4 pieces, used

2 pairs of used FG tyre heating blankets for tyre size: - Maximum 120 mm outer diameter - Maximum tyre width 80 mm So for all standard touring car/GT 1:5 tyres! Not suitable for Formula 1 and truck tyres! Operating instructions: The tyre heating blankets may only be operated with 12 - 13.8 volt alternating or direct current. In order to achieve the best possible operating temperature, a power supply unit with 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 power supply unit is ideal here. Of course, the tyre heating blankets can also be operated directly from a 12 volt (without Powerbase) car battery. To avoid damaging the heating coil in the blankets, they must not be kinked and must not be used without tyres! Contents: 1 set / 4 pieces The tyre heating blankets have been tested in our workshop. See photos for condition and scope of delivery.

€75.00*

Perforated clutch bell Lauterbacher, used ‘1’

Used perforated Lauterbacher clutch bell. Fits many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Perforated clutch bell, used ‘3’

Used perforated clutch bell. Suitable for many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Steel Power resonance tube system, used "12"

Here you can purchase a used steel power resonance pipe in good condition. Complete as shown in the photos with manifold and connector. Total length 300 mm Diameter at the thickest point 70 mm. We do not know the manufacturer or the type of resonance tube, so we do not know exactly which large models the resonance tube is suitable for. See photos for condition and scope of delivery.

€69.00*

Samba steel resonance tube system used ‘13’

Here you can purchase a used Samba steel power resonance pipe in mint condition. Complete as shown in the photos with elbow and connector. Total length approx. 300 mm Diameter at the thickest point 65 mm. We do not know the type of resonance tube, so we do not know exactly for which large models the resonance tube is suitable. See photos for condition and scope of delivery.

€129.00*

Customers also viewed

Tyre heating blankets orange for 1:5 touring car set 4 pieces

€120.00* €199.00* (39.7% saved)

Mielke Hurrican Tuning resonance tube with Open Up System, used

Original Mielke spare/tuning part. Mielke HurricanHigh-performance resonance pipe system, especially for 1:5 FG 4WD touring cars and race trucks with 535 mm wheelbase (not suitable for 510 mm wheelbase). With open-up system, can be opened and cleaned from the inside. Includes manifold and mounting kit.

€99.00*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

As good as new Bubble-Ex for 1:10 to 1:5 RC cars, used. "2"

Indispensable for optimum suspension set-up! Vacuum reservoir for removing air bubbles from the shock absorber oil during filling. A vacuum pump is permanently integrated in the lid. The insert has holes for four shock absorbers each in the scales 1:10, 1:8, 1:6 and 1:5. Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more that have a suitable diameter. Shocks between 15 and 32 mm housing diameter can be used in the Bubble Ex and ‘de-bubbled’.Dimensions: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorbers to the top edge of the housing is approx. 150 mm, whereby longer shock absorbers can also be partially pushed together for insertion. Operation: Unlock the vacuum pump by turning it slightly to the left, the operating element then extends a little. The small plug with handle is used to close and ventilate the container. The plug must be pushed in to build up the vacuum. The small membrane on the opposite side indicates whether a vacuum is present. Only when this is bent outwards can the lid of the container be opened again without force (e.g. Losi 5ive-T etc.). Contents: Container with integrated vacuum pump Shock absorber insert.See photos for condition and scope of delivery. 1 piece

€35.00*