10530 FG 4-block clutch 05 adjustable, used "5"

€25.00*

Available

Product number: Kupplung FG 5 gebraucht

Product information "10530 FG 4-block clutch 05 adjustable, used "5""

Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.

-used.

See photos for condition and delivery.
Adjustable and in many details improved 4-block clutch.
This clutch is suitable for all FG models and other brands with Zenoah or CY engines.
Not suitable for HPI cars.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

Optional Speedometer DX2E ACTIVE, second-hand "as good as new"

The Spektrum™ DX2E ACTIVE™ Speedometer Module is an exclusive add on upgrade that actively displays real time MPH or KPH right in front of the driver. All that is needed is a telemetry capable receiver, such as the TM1500 Telemetry Module, and the easy to install Spektrum RPM Sensor.The Spektrum DX2E ACTIVE Speedometer Module features a simple one touch interface, allowing the driver to easily setup the speedometer and view the top speed at the touch of a button. The DX2E ACTIVE Speedometer Module is pre-configured for the Losi® TENACITY™ SCT, making it an exceptionally simple plug and play upgrade system that adds the immersion of brightly lit, heads up speedometer display to your DX2E ACTIVE Radio. And for other vehicles, setup is as simple as inserting your models motor pole count and tire roll out.1 piece, used

€18.00* €32.69* (44.94% saved)

Toro Beast Brushless Motor 1090 kV, used

Specifications Max. Current: 195 A Max. Voltage: 27 V Max. Power: 5,200 W KV (RPM/Volt): 1090 KV Depth of the mounting holes: 8 mm Hole pattern: 4 x M4 on 30 mm bolt circle diameter each Housing diameter: 57.8 mm Housing length: 92 mm Length of shaft: 30 mm Shaft diameter: 8 mm Weight: 960g Connector plug: 8 mm diameter Connection cable: 8AWG Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 1 piece

€149.90*

Perforated clutch bell Lauterbacher, used ‘1’

Used perforated Lauterbacher clutch bell. Fits many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Perforated clutch bell, used ‘3’

Used perforated clutch bell. Suitable for many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Steel Power resonance tube system, used "12"

Here you can purchase a used steel power resonance pipe in good condition. Complete as shown in the photos with manifold and connector. Total length 300 mm Diameter at the thickest point 70 mm. We do not know the manufacturer or the type of resonance tube, so we do not know exactly which large models the resonance tube is suitable for. See photos for condition and scope of delivery.

€69.00*

Samba steel resonance tube system used ‘13’

Here you can purchase a used Samba steel power resonance pipe in mint condition. Complete as shown in the photos with elbow and connector. Total length approx. 300 mm Diameter at the thickest point 65 mm. We do not know the type of resonance tube, so we do not know exactly for which large models the resonance tube is suitable. See photos for condition and scope of delivery.

€129.00*

Lauterbacher 3 jaw clutch adjustable for FG / Carson / HPI / Losi Modelle, used "3"

Lauterbacher clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€39.00*

FG 4 jaws Teflon clutch adjustable, used "2"

Fg 4 jaw Teflon clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€35.00*

5188 Mielke HOT - Power tuned pipe exhaust system losi 5T/2.0 and Mini, used.

Genuine Mielke spare/option part. "used"Scope of delivery and condition see photos.The HOT-Power tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi 5ive-T and Losi 5ive-Mini in combination with large displacement and modified engines.The elaborate, angled design in combination with the long tail pipe, makes best use of the available space in the 5ive-T and Mini, allowing for optimum performance!The outlet at the rear contributes significantly to a scale look when driving the car!When designing the system, it was especially important to maximize the distance to the battery box of the Mini / 5ive-T in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box.The tuned pipe is made of aluminum, which keeps both weight and center of gravity low.The set also includes the complete installation hardware!Contents:1 set

€98.00*

GLO5T039/01 GPM Carbon fiber brake disk with brake pads for Losi 5ive-T and Mini

Genuine GPM spare/option part. Complete set for Losi 5ive-T and Mini and brake pads made from high strength aluminium with carbon fiber brake discs.Dimensions disc:Diameter: 60 mmMaterial thickness: 4,2 mmBrakedisk adapter: 16,5 x 27 mmContents:2 x Carbon fiber brake disc2 x outer brake pads2 x inner brake pads

€49.90*

Aluminum Big Bore shock absorber 20mm with spring, used -2-

1 pair of used aluminum shock absorbers with a length of 144 mm. Top and bottom mounting 4 mm. Housing diameter 20 mm. Spring length 90 mm x 2.4 mm. Very good condition, see photos.

€37.00*

GRP foam mounting block

1 GRP mounting stand for supporting and jacking up the of the RC car model. Dimensions: Length 210 mm Width 90 mm Height 43 mm Material hard foam in the colour orange with milled out GRP World Champion logo. See photos for condition and scope of delivery. 1 piece

€15.00*

Customers also viewed

4422/01 FG KG Clutch body for F1 and Solo

Genuine FG spare/option part. Spare part for 4422. Contents:1 piece

€75.30*

Lauterbacher 3 jaw clutch adjustable for FG / Carson / HPI / Losi Modelle, used "3"

Lauterbacher clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€39.00*

5651 Mielke Power Gearshift II Converse clutch for FG Evo / RS5 TC / Harm SX3, 2,4 mm springs, Mix with long clutch carrier

Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

2006 FG Master cylinder - 1pce.

Suitable for Collari front and rear hydraulic brake (and ).

€93.80*

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

10071 FG Clutch carrier for Solo - 1pce.

Fits formula 1 cars only.

€25.50*

7431 FG Steel gearwheel hardened 22 teeth - 1pce.

Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€28.50*