Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Toro Beast Brushless Motor 1090 kV, used

Product information "Toro Beast Brushless Motor 1090 kV, used"

Specifications 

Max. Current: 195 A Max. Voltage: 27 V 
Max. Power: 5,200 W 
KV (RPM/Volt): 1090 KV 
Depth of the mounting holes: 8 mm 
Hole pattern: 4 x M4 on 30 mm bolt circle diameter each 
Housing diameter: 57.8 mm 
Housing length: 92 mm 
Length of shaft: 30 mm 
Shaft diameter: 8 mm 
Weight: 960g 
Connector plug: 8 mm diameter 
Connection cable: 8AWG 

Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 

1 piece 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

TT70120 Top Tuning Beast Brushless motor 620 kV
Genuine Top Tuning spare/option part. Specifications:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mm and 40 mm bolt circleCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730gFeatures:High Quality BearingsRotor-4Pole High Quality MagnetsStator-Super Thin Silicon Steels Super Strength 8mm ShaftCNC Aluminium Heatsink ShellCopper Wires Of High Temperature EnduranceContents:1 piece

€299.90*

Average rating of 0 out of 5 stars

TT56112/520 Top Tuning Monster Brushless Motor 520kV
Genuine Top Tuning spare/option part. Specifications Max. amps: 129 A Max. voltage: 57 V Max. power: 7,350 W KV (RPM/Volt): 520 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 112 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 1260 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance Contents:1 piece

€219.90*

Average rating of 0 out of 5 stars

7902/01 FG Electric engine 980KV Brushless
Genuine FG spare/option part. Powerful brushless engine, high torque, sintered neodymium magnets, hand-wound long working life.Adapter bushing FG # 66514 is required for installation of steel pinions with 10 mm bore diameter. Suitable for 1/6 buggy / monster / street cars.Technical data:Max. voltage: 22,2V (6S)Max. current: 193AMax. 30.000RPMPower in watt: 4250WRotor poles: 4IO: 2.8AResistance: 0.0128Length: 82mmDiameters: 55 / 58mm with finsWeight: 880gShaft Diameter: 8mmLength of extend shaft: 30mmContent:1 piece

€259.95*

Average rating of 0 out of 5 stars

TT5682/01 Top Tuning Brushless Motor 980 kV
Genuine Top Tuning spare/option part. Specifications Max. amps: 160 A Max. voltage: 30 V Max. power: 4,200 W KV (RPM/Volt): 980 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 82 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 880 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance Contents:1 piece

€169.90*

Average rating of 0 out of 5 stars

TT56112/700 Top Tuning Monster Brushless Motor 700 kV
Genuine Top Tuning spare/option part. Specifications Max. amps: 175 A Max. voltage: 42 V Max. power: 7,350 W KV (RPM/Volt): 700 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 112 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 1260 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance Contents:1 piece

€219.90*

Average rating of 0 out of 5 stars

DYNS1660 Fuze 1/6th Brushless engine 1200kv
Genuine Losi spare/option part.Dimensions:Motor length without shaft: 87,5 mmDiameter Motor: 57,8 mmDiameter of the shaft: 8 mmLength of the shaft: 27 mmContents:1 piece

€209.99*

Average rating of 0 out of 5 stars

700.915 Eicker Racing starter motor ballraced
Motor for starter box, ballraced, with externally accessible brush holders.Dimensions:Diameter: 65 mmLength 106 mmContent:1 piece

€49.90*

Average rating of 0 out of 5 stars

TT5682/02 Top Tuning Brushless Motor 1300 kV
Genuine Top Tuning spare/option part. Specifications Max. amps: 193 A Max. voltage: 22 V Max. power: 4,200 W KV (RPM/Volt): 1300 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 82 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 880 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance Contents:1 piece

€169.90*

Average rating of 0 out of 5 stars

DYNS1665 Dynamite 1/5th Brushless Motor, 800kv
Genuine Losi spare/option part. Contents:1 piece

€249.99*
%

Average rating of 0 out of 5 stars

7902 FG Electric engine 1300KV Brushless
Genuine FG spare/option part. Technical data:4.000W 14,8V (4S) Maxi: 193ARPM maxi: 30.000 rpmDimensions: 82 x 58 mmAxle: 30 x 8mmWeight: 880gContent:1 piece

€199.90* €215.95* (7.43% saved)

Average rating of 0 out of 5 stars

500502033/100 Carson CY-Eline Brushless engine 1.600 Kv
Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€179.99*

Average rating of 0 out of 5 stars

DYNS1670 Dynamite Fuze 1/6 Brushless Motor 750Kv for Super Rock Rey
Genuine Dynamite spare/option part. Series motor of the Super Rock Rey.Contents:1 piece

€229.99*

Customers also viewed

Average rating of 0 out of 5 stars

TT5692 Top Tuning Brushless Motor 1090 kV
Genuine Top Tuning spare/option part. Specifications Max. amps: 195 A Max. voltage: 29 V Max. power: 5,200 W KV (RPM/Volt): 1090 KV Mounting hole depth: 8 mm Bolt pattern: 4 x M4 at 30 mm pitch circle diameter Case diameter: 57.8 mm Case length: 92 mm Free shaft length: 30 mm Shaft diameter: 8 mm Weight: 980 g Connector: 6.5 mm diameter Cable size: 8AWG Features High quality bearings 4Pole rotor with high quality magnets Stator - super thin silicon steel layers Super strength 8 mm shaft CNC Aluminium heatsink case Copper wires with high temperature endurance Contents:1 piece

€179.90*

Average rating of 0 out of 5 stars

y0827 Spout for gas cans, 1 pce.
Spout, fits the standard gas cans, for a spill-free gas up. For gas cans with the following thread size: diameter 37 mm x pitch 5 mm.Compatible with Marder tanks as well!

€22.90*

Average rating of 0 out of 5 stars

y0553 Zenoah G260RC with Walbro carburetor WT 603B
This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

Average rating of 0 out of 5 stars

6046 FG Steel pinion 14 teeth
Genuine FG spare/option part. True running steel pinion for minimized wear. Application: Layshaft pinion on all FG monster cars, not for use on the clutchbell.Dimensions:Diameter: 25 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Contents:1 piece

€32.90*

Average rating of 0 out of 5 stars

y1541 Complete screws/nuts/washer set for Losi Super Baja Rey / Rock Rey
Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi Super Baja Rey.The set includes a total of 321 screws, in different quantities which are all used on the Losi Super Baja Rey / Rock Rey.6 sizes of cap head screws11 sizes of CSH screws13 sizes of button head screws6 sizes of set screws3 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:4 piecesM2x101 piecesM2,5x813 piecesM3x102 piecesM3x122 piecesM3x165 piecesM3x306 piecesM3x45 CSH screws in 10.9:5 piecesM2,5x86 piecesM3x66 piecesM3x1234 piecesM3x161 piecesM4x1010 piecesM4x122 piecesM4x149 piecesM4x166 piecesM4x1814 piecesM4x202 piecesM4x25Button head screws in 10.98 piecesM3x89 piecesM3x195 piecesM3x126 piecesM3x1616 piecesM3x204 piecesM3x304 piecesM3x3512 piecesM4x128 piecesM4x1618 piecesM4x2010 piecesM4x2512 piecesM4x301 piecesM4x35Grub screws:2 piecesM3x63 piecesM4x46 piecesM4x56 piecesM4x61 piecesM5x48 piecesM5x30Washers:Unterlagscheiben:5 piecesM3,25 piecesM4,34 pieces H5 Seeger HalfmoonSelf-locking nuts:4 piecesM335 piecesM4Nuts:2 piecesM45 piecesM5

€44.90*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-510 with BMW E30 body HT-Edition
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper, BMW E30 and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with 2.4 GHz radio control system, servos, batteries in our configurator.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servoDimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips:

From €1,449.95*

Average rating of 0 out of 5 stars

Losi 5ive-T Race body with cage, used
1 piece Losi 5ive-T Race body tipped and painted with cage, used. The body has damage and cracks.  See photos for scope of delivery and condition.

€149.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency