Perforated clutch bell, used ‘3’

€15.00*

Prices incl. VAT plus shipping costs

Available

Product number: kupplungsglocke 3 gebraucht

Product information "Perforated clutch bell, used ‘3’"

Used perforated clutch bell.

Suitable for many 1:5 FG and Carson 2WD models.

See photos for condition and scope of delivery.

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

GLO5T039/01 GPM Carbon fiber brake disk with brake pads for Losi 5ive-T and Mini

Genuine GPM spare/option part. Complete set for Losi 5ive-T and Mini and brake pads made from high strength aluminium with carbon fiber brake discs.Dimensions disc:Diameter: 60 mmMaterial thickness: 4,2 mmBrakedisk adapter: 16,5 x 27 mmContents:2 x Carbon fiber brake disc2 x outer brake pads2 x inner brake pads

€49.90*

Perforated clutch bell, used ‘2’

Used perforated clutch bell. Suitable for many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Perforated clutch bell Lauterbacher, used ‘1’

Used perforated Lauterbacher clutch bell. Fits many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

y1426 HT steel gear wheel adapter - smooth track - incl. 40 mm steel gear wheel for the intermediate shaft, used

Fits FG and Smartech touring cars.The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car.The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears!The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€35.90*

FG tyre heating blankets for 1:5 touring cars 1 pair, used

1 pair of used FG tyre heating blankets for tyre size: - Maximum 120 mm outer diameter - Maximum tyre width 80 mm So for all standard touring car/GT 1:5 tyres! Not suitable for Formula 1 and truck tyres! Operating instructions: The tyre heating blankets may only be operated with 12 - 13.8 volt alternating or direct current. In order to achieve the best possible operating temperature, a power supply unit with 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 power supply unit is ideal here. Of course, the tyre heating blankets can also be operated directly from a 12 volt (without Powerbase) car battery. To avoid damaging the heating coil in the blankets, they must not be kinked and must not be used without tyres! Contents: 2 pieces/ 1 pair The tyre heating blankets have been tested in our workshop. See photos for condition and scope of delivery.

€35.00*

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used

Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Condition see photos.

€39.00*

Elcon differential with quick-release axles for ball drive, used

Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Including ball bearings. Condition see photos. For many FG and Carson Models.

€99.00*

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used "1"

Condition see photos.

€29.00*

Toro Beast Brushless Motor 1090 kV, used

Specifications Max. Current: 195 A Max. Voltage: 27 V Max. Power: 5,200 W KV (RPM/Volt): 1090 KV Depth of the mounting holes: 8 mm Hole pattern: 4 x M4 on 30 mm bolt circle diameter each Housing diameter: 57.8 mm Housing length: 92 mm Length of shaft: 30 mm Shaft diameter: 8 mm Weight: 960g Connector plug: 8 mm diameter Connection cable: 8AWG Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 1 piece

€149.90*

Samba steel resonance tube system used ‘13’

Here you can purchase a used Samba steel power resonance pipe in mint condition. Complete as shown in the photos with elbow and connector. Total length approx. 300 mm Diameter at the thickest point 65 mm. We do not know the type of resonance tube, so we do not know exactly for which large models the resonance tube is suitable. See photos for condition and scope of delivery.

€129.00*

FG 4 jaws Teflon clutch adjustable, used "2"

Fg 4 jaw Teflon clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€35.00*

10530 FG 4-block clutch 05 adjustable, used "5"

Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.-used.See photos for condition and delivery.Adjustable and in many details improved 4-block clutch.This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.

€25.00*