GLO5T039/01 GPM Carbon fiber brake disk with brake pads for Losi 5ive-T and Mini

€49.90*

Available

Product number: gpm_glo5t039_01

EAN: 4058575105015

Product information "GLO5T039/01 GPM Carbon fiber brake disk with brake pads for Losi 5ive-T and Mini"

Genuine GPM spare/option part.

Complete set for Losi 5ive-T and Mini and brake pads made from high strength aluminium with carbon fiber brake discs.

Dimensions disc:

Diameter: 60 mm
Material thickness: 4,2 mm
Brakedisk adapter: 16,5 x 27 mm

Contents:

2 x Carbon fiber brake disc
2 x outer brake pads
2 x inner brake pads

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

GLO5T039 GPM Carbon fiber brake disk for Losi 5ive-T and Mini

Carbon fiber brake disk for the Losi 5ive-T und Mini.With 2 mm holes and 10 mm long slotts for dirt admission.Measures:Diameter: 60 mmMaterial thickness: 4,2 mmBrakedisk adapter: 16,5 x 27 mmFits Losi 5ive-T and Mini.

From €29.90*

Details

y0779/042 GPM Pads set for Losi 5ive-T and Mini

Genuine GPM spare/option part. Replacement brake pads made from high strength aluminium, for the sets no. y0779/04, GLO5T039/01 and y1338/01.Contents:2 x outer brake pads2 x inner brake pads

€19.90*

Similar products

Perforated clutch bell, used ‘2’

Used perforated clutch bell. Suitable for many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Perforated clutch bell Lauterbacher, used ‘1’

Used perforated Lauterbacher clutch bell. Fits many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

y1426 HT steel gear wheel adapter - smooth track - incl. 40 mm steel gear wheel for the intermediate shaft, used

Fits FG and Smartech touring cars.The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car.The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears!The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€35.90*

FG tyre heating blankets for 1:5 touring cars 1 pair, used

1 pair of used FG tyre heating blankets for tyre size: - Maximum 120 mm outer diameter - Maximum tyre width 80 mm So for all standard touring car/GT 1:5 tyres! Not suitable for Formula 1 and truck tyres! Operating instructions: The tyre heating blankets may only be operated with 12 - 13.8 volt alternating or direct current. In order to achieve the best possible operating temperature, a power supply unit with 12 - 13.8 volts AC or DC and at least 10 amps output power should be used. The T2m Powerbase y1352 power supply unit is ideal here. Of course, the tyre heating blankets can also be operated directly from a 12 volt (without Powerbase) car battery. To avoid damaging the heating coil in the blankets, they must not be kinked and must not be used without tyres! Contents: 2 pieces/ 1 pair The tyre heating blankets have been tested in our workshop. See photos for condition and scope of delivery.

€35.00*

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used

Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Condition see photos.

€39.00*

Elcon differential with quick-release axles for ball drive, used

Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Including ball bearings. Condition see photos. For many FG and Carson Models.

€99.00*

Elcon 4 jaw Teflon clutch adjustable for FG / Carson / HPI / Losi Modells, used "1"

Condition see photos.

€29.00*

Toro Beast Brushless Motor 1090 kV, used

Specifications Max. Current: 195 A Max. Voltage: 27 V Max. Power: 5,200 W KV (RPM/Volt): 1090 KV Depth of the mounting holes: 8 mm Hole pattern: 4 x M4 on 30 mm bolt circle diameter each Housing diameter: 57.8 mm Housing length: 92 mm Length of shaft: 30 mm Shaft diameter: 8 mm Weight: 960g Connector plug: 8 mm diameter Connection cable: 8AWG Features High quality ball bearings 4-pole rotor with high-quality magnets Stator made of super-thin silicon steel High strength 8 mm shaft CNC aluminium housing with cooling fins High temperature resistant copper winding Content: 1 piece

€149.90*

Perforated clutch bell, used ‘3’

Used perforated clutch bell. Suitable for many 1:5 FG and Carson 2WD models. See photos for condition and scope of delivery. 1 piece

€15.00*

Samba steel resonance tube system used ‘13’

Here you can purchase a used Samba steel power resonance pipe in mint condition. Complete as shown in the photos with elbow and connector. Total length approx. 300 mm Diameter at the thickest point 65 mm. We do not know the type of resonance tube, so we do not know exactly for which large models the resonance tube is suitable. See photos for condition and scope of delivery.

€129.00*

FG 4 jaws Teflon clutch adjustable, used "2"

Fg 4 jaw Teflon clutch adjustable for FG, Carson, HPI, Losi and many other models with long adapter for Zenoah, CY or similar engines, used.See photos for condition and delivery.

€35.00*

10530 FG 4-block clutch 05 adjustable, used "5"

Reliable and approved 4-block clutch with teflon linings, adjustable. The well approved clutch was reworked in some details. This clutch is excellent for the use in Off-Road models and is distinguised through reliability and low wear.-used.See photos for condition and delivery.Adjustable and in many details improved 4-block clutch.This clutch is suitable for all FG models and other brands with Zenoah or CY engines.Not suitable for HPI cars.

€25.00*

Customers also viewed

40003 Samba Moca carbon Airbox for Formula 1

Genuine Samba spare/option part. Moca Racing Airbox Carbon ultralight for Moca and Lightscale Formula 1 body shells.Very strong airbox, latest version which was revised in 2023. Contents:1 set

€119.90*

Details

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C

7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90*

Configure now

54150/01 FG FG Monster Buggy WB 535 body shell, clear

Genuine FG spare/option part. Contents:1 piecePainting tips:

€127.95*

AT-5T014 ATOP Ball-raced servo saver for Losi 5ive-B/T and Mini

Genuine Atop spare/option part. Ball-raced servo saver and steering assy for Losi 5ive-B/T and Mini. Replaces all stock parts between steering servo and steering rods except for the servo saver shafts. With ball bearings all around and dual linkages between servo and servo saver steering precision is greatly enhanced. Complete set with ball-raced servo saver, ball-raced centerlink, full metal second side servo linkage and installation hardware.Content:1 set

€89.90*

Details

8450/05 FG Front tuning disk brake for nearly all FG-models

Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining

€169.95*

FG tyre heating blankets for 1:5 touring cars 1 pair, used

€35.00*

Tire set off-road 1:10 2WD original Kyosho, rarity

Undriven.2 pieces of front tires with bushings2 pieces of rear tires with hexagonalTire diameter: 100mmWidth: 50mmScope of delivery as shown in pictures.

€39.00*