AREA-5T-020 Aluminum rear shock tower Losi 5ive-T/2.0/B and Mini
Genuine Area spare/option part.CNC-machined rear shock tower from 6061-T6 aluminum by Area RC.Strong (7 mm thick), yet light weight version (98 grams). Comes with aluminum cage brackets included!Contents:1 piece
AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces
AT-5T002 ATOP Aluminum rear chassis brace Losi 5ive-T/2.0 and Mini
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved design combines increased strength with reduced weight (59 grams).Contents:1 piece
AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set
AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set
AT-5T007 ATOP Aluminum rear skid plate Losi 5ive-T and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: 85 grams.Contents:1 piece
AT-5T013 ATOP Rear camber rods 5ive-T/2.0
Genuine ATOP spare/option part. Upper rear camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 140 mm. Contents:2 pieces
AT-5T015/16 ATOP Aluminum front and rear transmission case Losi 5ive-T/2.0/B and Mini
Genuine ATOP spare/option part.AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/B and MiniCompletely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsAT-5T016 ATOP Aluminum rear transmission case Losi 5ive-T/B and MiniCompletely cnc-machined rear transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Set comes with bearing carriers included! We recommend to install the bearings using thread locking compound y0113. Bindulin silicone sealant y19015 is recommended for installing the bearing adaptors into the transmission case. Modification of the Atop bearing carriers is required when using HD differential drive cups y1477. Weight:approx. 418 gramsContents:1 set
AT-5T016 ATOP Aluminum rear transmission case Losi 5ive-T/B and Mini
Genuine ATOP spare/option part. Completely cnc-machined rear transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Set comes with bearing carriers included! We recommend to install the bearings using thread locking compound y0113. Bindulin silicone sealant y19015 is recommended for installing the bearing adaptors into the transmission case. Modification of the Atop bearing carriers is required when using HD differential drive cups y1477. Weight:approx. 418 gramsContents:1 piece
AT-5T016/01 ATOP Alloy bearing inserts, rear diff, 5ive-T/2.0/B and Mini
Genuine ATOP spare/option part. Fits the rear plastic gearbox on all cars from the 5ive series and as spare part the ATOP gearbox AT-5T016. Stock size bearings are used.Contents:2 pieces
AT-5T022 ATOP Aluminum differential case for Losi 5ive-T/2.0/B and Mini, one-piece design
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by Area RC.The big advantage over the stock plastic part is its temperature insensitivity. While the plastic case loses its strength with increasing temperatures and may finally disintegrate, the aluminum case stays intact.The one-piece design guarantees a true running and leak-free case. Steel bushing for drive cup shaft and O-ring.Fits front, center and rear applications on all Losi 5ive versions and Mini!Contents:1 piece
AT-5T024 ATOP Aluminum rear a-arms Losi 5ive-T/2.0
Light weight design (119 grams each), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T rear.The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Bushings for the hinge pins guarantee low wear.
BJ056/DC Delrin bushings, spare part for GPM rear löwer a-arm
Delrin bushings, spare part for GPM rear lower a-arms BJ056 for HPI Baja cars, set of eight.Dimensions:Outer diameterer: approx. 8.1 mmInner diameter: approx. 6 mmLength: approx. 9.7 mm
LO5T030 GPM Alloy shock tower Losi 5ive-T/2.0 and Mini / B4, rear
Very nicely machined front shock tower from GPM, made of high grade 7075-T6 aluminum. The increased thickness of the upper section makes bending or breaking almost impossible. Cleverly positioned cutouts keep the weight down and make for a pleasing appearance.Direct replacement for the stock part using OEM hardware.Content:1 piece
LO5T056-ACC Spare bushings set for GPM/Losi 5ive-T rear a-arms LO5T056, set
Bushings set for GPM rear a-arms part no. LO5T055.
LO5T331F GPM Rear Gear Box Protector for Losi 5ive-T/2.0
Full length about 127 mm long. Made from high strength 7075-T6 aluminium. 3,5 mm thickness. Stiffing reinforcing 1,5 mm wide and 1,4 mm thick.Content:Four allen head screws M6 x 20 mm Weight: 357 grams/ pair
LOS351013 Losi Rear Cage Mount, Aluminum, 5ive-T / 2.0
Genuine Losi spare/option part. Contents:1 piece
LOSB2544 Losi Alloy Bearing Inserts, Rear Diff, Blue 5ive-T/2.0 and Mini
Genuine Losi spare/option part. Fits Losi 5ive-T and 5ive Mini. Content:2 pieces
LOSB2562 Losi Sway Bar Set & Hardware F&R, 5ive-T/2.0, TLR 5ive-B, TLR 5ive-B and Mini
Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with Losi 5ive part B51007/55039/55040/55014.Compatible with B61039/55039/55040/55013Compatible with B51008/55041Compatible with B51008/55042Compatible with B51008/55043Compatible with B51037/55038/1Compatible with B51016Content:3 pieces
TLR351004 TLR Aluminum Rear Chassis Brace, HA for 5ive-T/2.0 and Mini WRC
Genuine TLR spare/option part.Content:1 pieces
TLR352001 TLR Cross Pins & Support blocks for 5ive-T/2.0, TLR 5ive-B and Mini WRC
Genuine TLR spare/option part.Content:12 pieces Support blocks6 pieces Cross pins
TLR353002 TLR shock shaft, rear, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC
TLR shock shaft for Losi 5ive-T, TLR 5ive-B and Mini WRC rear shocks; TiCN (titanium carbon nitride) coated; approx 96.8 mm long.Direct replacement for stock shock shaft LOSB 2852.Contents:2 pieces
TLR354000 TLR hinge pin, chassis side, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC
TLR hinge pin for Losi 5ive-T, TLR 5ive-B and Mini WRC, front and rear; TiCN (titanium carbon nitride) coated; approx 105.5 mm long.Direct replacement for stock hinge pin from the set LOSB 2080.Contents:2 piece
TLR354001 TLR hinge pin, rear outer, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC
TLR hinge pin for Losi 5ive-T, TLR 5ive-B and Mini WRC, rear outer; TiCN (titanium carbon nitride) coated; approx 79.5 mm long.Direct replacement for stock hinge pin from the set LOSB 2080.Contents:2 pieces