LOSB2544 Losi Alloy Bearing Inserts, Rear Diff, Blue 5ive-T/2.0 and Mini

€34.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_losb2544

EAN: 605482053812

Product information "LOSB2544 Losi Alloy Bearing Inserts, Rear Diff, Blue 5ive-T/2.0 and Mini"

Genuine Losi spare/option part.

Fits Losi 5ive-T and 5ive Mini.

Content:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

AT-5T016/01 ATOP Alloy bearing inserts, rear diff, 5ive-T/2.0/B and Mini

Genuine ATOP spare/option part. Fits the rear plastic gearbox on all cars from the 5ive series and as spare part the ATOP gearbox AT-5T016. Stock size bearings are used.Contents:2 pieces

€19.90*

Similar products

LOSB2071 Losi Front Suspension Arm Set 5T , 2 pcs.

Genuine Losi spare/option part.Since the beginning of 2014 Losi makes the a-arms about 4 mm longer. This does not cause any problems when installed in earlier version cars!Content:2 Pieces

€39.99*

LOSB2076 Losi Rear wishbone arm set 5T, 2 pcs.

Item N° LOSB2076Rear wisbounes Arm Set 5T, 2 pcs.

€29.99*

LOSB2080 Losi Hinge Pin Set 5T and Mini

Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B59011Contents:6 pieces

€29.99*

LOSB2570 Losi Side Guard Set 5T and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:2 pieces

€39.99*

LOSB2073 Losi Front Spindle Carrier Set 5T, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B59010Contents:2 pieces

€19.99*

LOSB2072 Losi Front Spindle Set, 5T, TLR 5ive-B and Mini

Suitable for Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with [B59010/B59011Contents:2 pieces

€19.99*

LOSB2576 Losi Rear Bumper Brace Set 5T, 1 pce.

Item N° LOSB2576Rear Bumper Brace Set 5T, 1 St.

€29.99*

LOSB2551 Losi Steering Post Set 5T, TLR 5ive-B and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B55005Content:2 pieces

€19.99*

LOSB2077 Losi Rear Hub Carrier Set 5T, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B59011Content:2 pieces

€19.99*

LOSB2573 Losi Front & Rear Bumper Set 5T

Genuine Losi spare/option part.Fits Losi 5ive-T .Content:2 pieces

€29.99*

Details

LOSB2574 Losi Front Skid Plate,Bumper Brace & Spacers 5T, 1 pce.

Genuine Losi spare/option part.

€39.99*

Details

LOSB2572 Losi Right Cage Side 5T, 1 pce.

Item N° LOSB2572Right Cage Side 5T, 1 pce.

€39.99*

Customers also viewed

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*

5020/01 FG Front bumper Porsche GT2/GT3

Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€35.90*

y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r

y1477 Versin: y1477/02 Set for the rear axle+ 20EUR

Genuine HT spare/option part.These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.We recommend y0809 Klüber grease for lubrication of closed HD drive cups.A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction. The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.You can find advices for installation at the specifications-tab.Contents:Front set:2 pieces of 300M steel HD differential drive cup, front and rear application2 pieces of driveshaft bootsRear set:2 pieces of 300M steel HD differential drive cup, front and rear application1 pair of modified bearing carriers2 pieces of driveshaft boots

Variants from €119.90*

€139.90*

Details