Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

TLR354001 TLR hinge pin, rear outer, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC

Product information "TLR354001 TLR hinge pin, rear outer, TiCN coated, 5ive-T/2.0, TLR 5ive-B and Mini WRC"

TLR hinge pin for Losi 5ive-T, TLR 5ive-B and Mini WRC, rear outer; TiCN (titanium carbon nitride) coated; approx 79.5 mm long.

Direct replacement for stock hinge pin from the set LOSB 2080.


Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

LO5T055-ACC Spare bushings set for GPM/Losi 5ive-T front a-arms LO5T055, set
Bushings set for GPM front a-arms part no. LO5T055.

€17.99*

Average rating of 0 out of 5 stars

BJ056/DC Delrin bushings, spare part for GPM rear löwer a-arm
Delrin bushings, spare part for GPM rear lower a-arms BJ056 for HPI Baja cars, set of eight.Dimensions:Outer diameterer: approx. 8.1 mmInner diameter: approx. 6 mmLength: approx. 9.7 mm

€4.90*

Average rating of 0 out of 5 stars

AT-5T023/024 ATOP Aluminum a-arms front and rear Losi 5ive-T/2.0
Genuine ATOP spare/option part.Light weight design (Total weight of all the wishbones is a mere 444 grams), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T front. The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Plastic bushings for the hinge pins guarantee low wear. On the wheel side floating stainless steel bushings allow for normal tightening of the c-hub screws.Contents:1 set

€149.90*

Average rating of 0 out of 5 stars

LO5T056-ACC Spare bushings set for GPM/Losi 5ive-T rear a-arms LO5T056, set
Bushings set for GPM rear a-arms part no. LO5T055.

€8.90*

Average rating of 0 out of 5 stars

LOSB3225 Losi F/R Wheel Hex & Pin 5T, TLR 5ive-B and Mini
Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B55015Content:2 pieces

€39.99*

Similar products

Average rating of 0 out of 5 stars

AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. Closed design, thread size M18 x 1,5 for Losi 5ive-T/B, Mini, DBXL and MTXL. Wrench size 24 mm, may fit other cars as well.Contents:4 pieces

€22.90*

Average rating of 0 out of 5 stars

y0722 Axle plugs for Losi 5ive-T/2.0, Mini
y0722 Quanity: y0722/01 - Set of 4
For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

Average rating of 0 out of 5 stars

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks
Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Average rating of 0 out of 5 stars

y0057 Ball & socket tool for Losi and HPI
Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

LO5T331F GPM Rear Gear Box Protector for Losi 5ive-T/2.0
Full length about 127 mm long. Made from high strength 7075-T6 aluminium. 3,5 mm thickness. Stiffing reinforcing 1,5 mm wide and 1,4 mm thick.Content:Four allen head screws M6 x 20 mm Weight: 357 grams/ pair

€29.90*

Average rating of 0 out of 5 stars

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

AT-5T007 ATOP Aluminum rear skid plate Losi 5ive-T and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: 85 grams.Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€49.90*
%

Average rating of 0 out of 5 stars

AT-5T015/16 ATOP Aluminum front and rear transmission case Losi 5ive-T/2.0/B and Mini
Genuine ATOP spare/option part.AT-5T015 ATOP Aluminum front transmission case Losi 5ive-T/B and MiniCompletely cnc-machined front transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Weight:approx. 297 gramsAT-5T016 ATOP Aluminum rear transmission case Losi 5ive-T/B and MiniCompletely cnc-machined rear transmission case from billet 6061-T6 aluminum by Atop. Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case. It also ends the problem of stripped tread holes for the mounting screws. Set comes with bearing carriers included! We recommend to install the bearings using thread locking compound y0113. Bindulin silicone sealant y19015 is recommended for installing the bearing adaptors into the transmission case. Modification of the Atop bearing carriers is required when using HD differential drive cups y1477. Weight:approx. 418 gramsContents:1 set

€319.90* €349.80* (8.55% saved)

Average rating of 0 out of 5 stars

LO5T056-ACC Spare bushings set for GPM/Losi 5ive-T rear a-arms LO5T056, set
Bushings set for GPM rear a-arms part no. LO5T055.

€8.90*

Average rating of 0 out of 5 stars

AT-5T024 ATOP Aluminum rear a-arms Losi 5ive-T/2.0
Light weight design (119 grams each), CNC-machined from 6061-T6 aluminum by ATOP a-arms fits Losi 5ive-T rear.The chassis-side is wider than stock arms to bring the large longitudinal play at this point down to a reasonable level.Bushings for the hinge pins guarantee low wear.

€79.90*

Average rating of 0 out of 5 stars

AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces

€64.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency