7432/29 FG Primary gears 37 teeth
€32.50
Available
Product information "7432/29 FG Primary gears 37 teeth"
| Clutch | Gear shaft outer | Gear shaft inner | Differential | Reduction ratio |
| 34 | 58 | 23 | 73 | 5,41 |
| 34 | 58 | 23 | 74 | 5,49 |
| 34 | 58 | 24 | 73 | 5,19 |
| 34 | 58 | 24 | 74 | 5,26 |
| 35 | 58 | 23 | 73 | 5,26 |
| 35 | 58 | 23 | 74 | 5,33 |
| 35 | 58 | 24 | 73 | 5,04 |
| 35 | 58 | 24 | 74 | 5,11 |
| 36 | 58 | 23 | 73 | 5,11 |
| 36 | 58 | 23 | 74 | 5,18 |
| 36 | 58 | 24 | 73 | 4,90 |
| 36 | 58 | 24 | 74 | 4,97 |
| 37 | 58 | 23 | 73 | 4,98 |
| 37 | 58 | 23 | 74 | 5,04 |
| 37 | 58 | 24 | 73 | 4,77 |
| 37 | 58 | 24 | 74 | 4,84 |
Contents:
- 1 piece
Login
Customers also bought
Genuine FG spare/option part.Suitable for FG 7347 and FG 7348.Hint:For installation on a Losi DBXL tank the mounting hole of the DBXL tank must be enlarged to 23 mm diameter.Contents:1 piece
Item N° 6432/17 Steel gearwheel 17 teeth, profile displaced, 1 pce. True running steel pinion for minimized wear. Suitable for all FG cars except Formula 1. Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.
Genuine FG spare/option part.Suitable for all 1:5 models, Race-Trucks and Monster models to optimize the road performance.Contents:1 piece
Genuine FG spare/option part. Complete starter unitPull start unit for CY / Zenoah G230/240/260/270/290/320.Contents:1 piece
Genuine FG spare/option part.For installation of 6183/01.Part is delivered in silver or black color from vendor!Content:1 piece
Customers also viewed
Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5
Small steel modul (1,25) transmission set for Sportsline and Challenge Line, improves performance and reliability.
Hard coated surface for wear protection.Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.