Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7427/01 FG Plastic gearwheel 40 teeth 2-speed - 1pce.

Product information "7427/01 FG Plastic gearwheel 40 teeth 2-speed - 1pce."

Suitable for all 1:5 models with 2-speed gear.
Diameter 63 mm
Width 15.5 mm
Tooth width 12 mm
Module: m=1,5

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

7052/01 FG Plastic gear wheel 42 teeth 2-speed
Genuine FG spare/option part. Gearwheel with 42 teeth for the layshaft. Only for the 2 speed box.Dimensions:Diameter: 66 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Content:1 piece

€15.50*

Average rating of 0 out of 5 stars

7431 FG Steel gearwheel hardened 22 teeth - 1pce.
Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€28.50*

Average rating of 0 out of 5 stars

Mielke 5446 Mix clutch shoes 2x aluminum / 1x carbon for Power Gearshift clutches
Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.

€44.90*

Average rating of 0 out of 5 stars

Mielke 5447/01 Springs 2,4 mm made from special steel
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Content:3 pieces

€9.90*

Average rating of 0 out of 5 stars

y0723 Gas-nitrited tuning clutch bell for FG, Smartech/Carson, Harm, RS5 & Co.
Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

7456 FG Alloy hub A 52mm - 1pce.
Item N° 7456 Alloy hub A 52mm - 1pce.Suitable for gear wheels with 42 or 44 teeth in connection with the 2-speed gears or .

€35.90*

Similar products

Average rating of 0 out of 5 stars

7427 FG Plastic gearwheel 40 teeth
Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

6427 FG Plastic gear wheel 46 teeth - 1pce.
46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

7052 FG Plastic gear wheel 42 teeth - 1pce.
Gearwheel with 42 teeth for the layshaft. Diameter 66 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€15.75*

Average rating of 0 out of 5 stars

7425 FG Plastic gearwheel 39 teeth - 1pce.
Suitable for all 1:5 models.Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€17.90*

Average rating of 0 out of 5 stars

6422 FG Plastic gearwheel 44 teeth - 1pce.
44 teeth plastic main gear for the layshaft.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6052 FG Plastic gearwheel 48 teeth
Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

7424 FG Plastic gearwheel 38 teeth
Genuine FG spare/option part.Suitable for all 1:5 models. Requires gear carrier 7423.Dimensions:Diameter: 60 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

y0119 Steel pinion 16 teeth
Steel pinion 16 teeth suitable for 46 mm main gear for FG models.Modul 1,5

€29.90*

Average rating of 0 out of 5 stars

7052/01 FG Plastic gear wheel 42 teeth 2-speed
Genuine FG spare/option part. Gearwheel with 42 teeth for the layshaft. Only for the 2 speed box.Dimensions:Diameter: 66 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Content:1 piece

€15.50*

Average rating of 0 out of 5 stars

7429 FG Plastic gearwheel 41 teeth - 1pce.
Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€17.90*

Average rating of 0 out of 5 stars

y6427/01 FG Plastic gear wheel 46 teeth 2-speed
46 teeth gear wheel for the layshaft with 2-speed gear box.Dampening rubbers with the order number 6051 are not required for this version.Dimensions:Diameter: 72 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5Contents:1 piece

€14.90*

Average rating of 0 out of 5 stars

6422/01 FG Plastic gearwheel 44 teeth 2-speed - 1pce.
44 teeth plastic main gear for the layshaft with 2-speed gear.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Customers also viewed

Average rating of 0 out of 5 stars

6422 FG Plastic gearwheel 44 teeth - 1pce.
44 teeth plastic main gear for the layshaft.Diameter 69 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

7053/01 FG Plastic pinion 22 teeth 2-speed - 1pce.
22 teeth geart for 42 teeth main gear with 2-speed gear. With 35 mm diameter.Please pay attention that plastic pinions with two opposite flat spots cannot be used on clutch bells with 90° angle pinion shaft. Then you need a .

€8.10*

Average rating of 0 out of 5 stars

7427 FG Plastic gearwheel 40 teeth
Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6052 FG Plastic gearwheel 48 teeth
Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

5189 FG Porsche 911 GT3R body shell, Wheelbase 530 mm, painted
Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 7020/17 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm

€299.95*

Average rating of 0 out of 5 stars

FG Sportsline 4WD-510 with Porsche 911 GT3 RSR body
The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis for the Porsche 911 GT3 RSR is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with painted bodyshell, 2.4 GHz radio control system, servos, batteries in our configurator. Team decals are not included in the delivery content and have to be ordered separately.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder polycarbonate bodyshell 2.4 GHz pistol grip radio control system with steering and gas servo.Dimensions: Length: 980 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm Touring cars in action!Painting tips:

From €1,299.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency