7431/21 FG Steel gearwheel hardened 21 teeth - 1pce.

€28.50*

Available

Product number: fg_7431_21

EAN: 3410564518281

Product information "7431/21 FG Steel gearwheel hardened 21 teeth - 1pce."

Item N° 7431/21
Steel gearwheel hardened 21 teeth - 1pce.

Suitable for 42 teeth main gear wheel.
Diameter 35.7 mm
Bore 10 mm
Total width 18 mm
Tooth width 11.5 mm
Module m=1.5

Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

10466/01 FG Cover for FG inlet silencer - 1pce.

Spare part for and .

€25.90*

7432/22 FG Steel gearwheel hardened 22 teeth - 1pce.

Item N° 7432/22 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€28.50*

7432/23 FG Steel gearwheel hardened 23 teeth - 1pce.

Item N° 7432/23 Steel gearwheel hardened 23 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€33.90*

Mielke 5442 Power Gearshift clutch for FG Formula 1 Competition / RS5 TC/F1 / Harm Sx4 TC / Evo 2020, Mix, 2,3mm springs, short clutch carrier

The new adjustable system features two aluminum and one carbon pad with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.For RS5 models till version T13!Not for FG F1 Sportsline model!

€129.50*

y7087/02 Alloy shock shaft end long

Genuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€15.90*

7052 FG Plastic gear wheel 42 teeth - 1pce.

Gearwheel with 42 teeth for the layshaft. Diameter 66 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.50*

Similar products

6431 FG Steel pinion 16 teeth

Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

6432 FG Steel pinion 18 teeth - 1pce.

Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.00*

7431 FG Steel gearwheel hardened 22 teeth - 1pce.

Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€28.50*

6431/01 FG Steel pinion 16 teeth, wide - 1pce.

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

7750 FG small module 1,25 transmission set, steel

Small steel modul (1,25) transmission set for Sportsline and Challenge Line, improves performance and reliability.

€99.99*

7433 FG Steel gearwheel hardened 26 teeth - 1pce.

Item N° 7433 Steel gearwheel hardened 26 teeth - 1pce.Suitable for 38 teeth main gear wheel.Diameter 41.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€29.90*

6046 FG Steel pinion 14 teeth

Genuine FG spare/option part. True running steel pinion for minimized wear. Application: Layshaft pinion on all FG monster cars, not for use on the clutchbell.Dimensions:Diameter: 25 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Contents:1 piece

€31.50*

HT-Nitrited steel pinions for all FG and 1/5 scale Carson / Smartech C5

Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)Pinions up to 16T can be used on the layshaft as well.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Teeth:Item no.:13 Teeth HT y026814 Teeth FG 604614 to 48 Teeth HT y011615 to 48 Teeth FG 604715 to 48 Teeth HT y19354 wide16 to 48 Teeth FG 643116 to 48 Teeth FG 6431/1 wide17 to 48 Teeth HT y19355-116 to 46 Teeth HT y011917 to 46 Teeth HT y1935518 to 46 Teeth FG 643219 to 46 Teeth HT y1935718 to 44 Teeth HT y012319 to 44 Teeth FG 6432/220 to 44 Teeth FG 643321 to 44 Teeth HT y1935820 to 42 Teeth HT y090421 to 42 Teeth FG 7431/2122 to 42 Teeth FG 743121 to 40 Teeth FG 7432/2122 to 40 Teeth FG 7432/2223 to 40 Teeth FG 7432/2324 to 40 Teeth FG 743225 to 40 Teeth FG 7432/2526 to 40 Teeth HT y1936426 to 38 Teeth FG 7433Contents:1 piece

€29.90*

Configure now

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

6433 FG Steel pinion 20 teeth - 1pce.

Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.90*

66217/01 FG Steel pinion 15T narrow, 1pce.

Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5

€29.95*

7432/25 FG Steel gearwheel hardened 25 teeth

Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece

€35.10*