PMT tyre Eclipse 20 on BBS rims, used "32"

€12.90*

Prices incl. VAT plus shipping costs

Available

Product number: reifen 32 gebraucht

Product information "PMT tyre Eclipse 20 on BBS rims, used "32""

1 pair of PMT tyre Eclipse 20 on BBS rim used. Rim mount for 18 mm square.

See photos for condition.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

PMT tyres Eclipse 15 on BBS rims, used "9"

1 pair of PMT tyres Eclipse 15 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€9.90*

GRP D tyre on ATS rims 18 mm square, used "21"

1 pair of GRP D tyre on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP A tyre on ATS rims 18 mm square, used "25"

1 pair of GRP A tyre on ATS rim with 18 mm square, used.Condition see photos.

€9.90*

GRP C tyres on ATS rims 18 mm square, used "19"

1 pair of GRP C tyre on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP Formel 1 tires S1 vorne, used "1"

1 pair of Formula 1 tyres S1 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.

€15.00*

GRP Formel 1 tires S3 vorne, used "2"

1 pair of Formula 1 tyres S3 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.

€15.00*

PMT tyre Eclipse 25 on BBS rims, used "30.1"

1 pair of PMT tyre Eclipse 25 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

PMT tyre Eclipse 15 on BBS rims, used "31"

1 pair of PMT tyre Eclipse 15 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

PMT tyre Eclipse 25 on BBS rims, used "33"

1 pair of PMT tyre Eclipse 25 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

GRP B tyres on ATS rims 18 mm square, used "18"

1 pair of GRP B tyre on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP tyres on ATS rims 18 mm square, used "22"

1 pair of GRP tyre on ATS rim with 18 mm square, used.Condition see photos.

€9.90*

FG slick tyres B on ATS rims 18 mm square, used "20"

1 pair of FG Slick tyre B on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

Customers also viewed

y1613 Mammoth Supergrip mounted and glued on silver FG rims

y1613 Version: Version

Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.

€89.90*

FG Challenge Line 2WD-530 Porsche 962C with 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 945 mmWidth: 390 mmHeight: 215 mmWheelbase: 530 mm

From €849.90*

Configure now

y0442 HT rim reinforcement all FG-Monster and Stadium rims

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€29.90*

TT1040 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey / 2.0 and Super Rock Rey / plastic spindles

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting.This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

y1330 BMW 320si WTCC 1/5 body shell, painted, 535 wheelbase, white/light blue

Genuine HT spare/option part.Fits 535 mm wheel base, current touring car width. A rear wing is available through the shop's options menu. The body shell comes without decals!Required body mounts:Front section: FG 7020/11 Front bumperRear body mount: FG 7152/01 Rear body supportSide front: FG 7012 Body mountSide rear: FG 7014 Body mountAvailable decal sheets:y1329 - Vehicle decalsy1320/01 - Team decals Posty1329/02 - Team decals Samsungy1329/03 - BMW-Bank decalsy0683 - Jägermeister decalsy3006 - rc-car-online decalsDimensions:Length: 885 mmWidth: 392 mmHeight: 260 mmWheel base: 530 mm

€99.90*

PMT tyre Eclipse 25 on BBS rims, used "33"

1 pair of PMT tyre Eclipse 25 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*