GRP C tyres on ATS rims 18 mm square, used "19"

€9.90*

Prices incl. VAT plus shipping costs

Available

Product number: Reifen 19 gebraucht

Product information "GRP C tyres on ATS rims 18 mm square, used "19""

1 pair of GRP C tyre on ATS rim for the front axle with 18 mm square, used.

Condition see photos.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

PMT tyres Eclipse 15 on BBS rims, used "9"

1 pair of PMT tyres Eclipse 15 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€9.90*

GRP D tyre on ATS rims 18 mm square, used "21"

1 pair of GRP D tyre on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP A tyre on ATS rims 18 mm square, used "25"

1 pair of GRP A tyre on ATS rim with 18 mm square, used.Condition see photos.

€9.90*

GRP Formel 1 tires S1 vorne, used "1"

1 pair of Formula 1 tyres S1 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.

€15.00*

GRP Formel 1 tires S3 vorne, used "2"

1 pair of Formula 1 tyres S3 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.

€15.00*

PMT tyre Eclipse 25 on BBS rims, used "30.1"

1 pair of PMT tyre Eclipse 25 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

PMT tyre Eclipse 15 on BBS rims, used "31"

1 pair of PMT tyre Eclipse 15 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

PMT tyre Eclipse 25 on BBS rims, used "33"

1 pair of PMT tyre Eclipse 25 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

PMT tyre Eclipse 20 on BBS rims, used "32"

1 pair of PMT tyre Eclipse 20 on BBS rim used. Rim mount for 18 mm square. See photos for condition.

€12.90*

GRP B tyres on ATS rims 18 mm square, used "18"

1 pair of GRP B tyre on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP tyres on ATS rims 18 mm square, used "22"

1 pair of GRP tyre on ATS rim with 18 mm square, used.Condition see photos.

€9.90*

FG slick tyres B on ATS rims 18 mm square, used "20"

1 pair of FG Slick tyre B on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

Customers also viewed

FG slick tyres B on ATS rims 18 mm square, used "20"

1 pair of FG Slick tyre B on ATS rim for the front axle with 18 mm square, used.Condition see photos.

€9.90*

GRP A tyre on ATS rims 18 mm square, used "25"

1 pair of GRP A tyre on ATS rim with 18 mm square, used.Condition see photos.

€9.90*

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€4.95*

Configure now

FG Sportsline with Mini Cooper body shell, 23cm³ Engine

The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 510 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.Dimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm Touring cars in action!Painting tips:

From €1,149.90*

Configure now

FG Challenge Line 2WD-510 Mini Cooper with 26 cm³ FG engine

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 510 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mm

From €849.90*

Configure now