GRP Formel 1 tires S3 vorne, used "2"

With this robust and reliable FG chassis, which is equipped with a powerful 26 cm³ combustion engine, you get the ideal entry into the fascinating "royal class" of large scale RC models as well as into the competition.The model has a 530 wheelbase. The models are built on a 4 mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in.Further equipment points are differential gear, 24 teeth steel pinion, oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings.The remote control, the two servos and the receiver battery (RTR set!) are required to operate the FG model. This RTR equipment is available in our shop selection for an additional fee.The body shell is clear, but also available in a painted version in our shop selection for an additional fee.Thanks to the numerous available option parts, you can upgrade your FG Challenge Line as required.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 780 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mm

Genuine FG spare/option part.The Off-Road Buggy models get a lot more grip and drive stability mounting the new Off-Road M tires. The narrow Off-Road tires M can be used for the front and for the rear axle.Dimensions:Diameter: 180 mmWidth: 60 mmContents:2 piece

Type GWK33E ,the profile rain tire for the front axle.The most driven Formula 1 tires of the past years were modified for an better tire-to-wheel adhesion. The double tire adhesion on the outside is no longer necessary, only one tire lip has to be glued at this new series. Instead of the optical tire lip a plastic ring has to be glued on. The tires offered as glued are professionally glued from GRP on the wheels and ready to drive. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Measures:Diameter: 140 mmWidth: 60 mmGlued on black rims. Glued by GRP on original Ellegi rim with 18 mm wheel square fits FG, Harm, RS5, Carson, Smartech, Nutech a.s.o

Special offer price !  Including Mecatech Expert hydraulic brake on the front axle.Highlights News 2025Tuning aluminium lower wishbones, one-piece (front and rear) Tuning chassis plate black anodised and milled Tuning milled aluminium rear axle linkage for toe-in adjustment  Perforated tuning clutch bell Side flaps on the rear spoiler in carbon fibreHighlights Formel 1 Competition- Numerous aluminium parts such as front and rear bearings, damper linkage, engine mount, wishbone ends. - Uniball steel ball joints, which allow all possible adjustments of the front and rear axle- gear drive, which ensures high reliability and optimum function. Like all FG Competition models, the Formula Competition from FG is the most successful model of recent years. The experience gained from the competitions has been incorporated into the latest version. With FG gear drive, which is extremely smooth-running and provides more power reserves. With this version, FG Modellsport has certainly created a competition-ready model for the years to come that will seamlessly build on past successes. Highlights Aluminium wishbones FG Gear drive Aluminium rear axle plate FG Adjustable aluminium shock absorbers Aluminium servo saver with ball bearings 26 cc Zenoah engine Airbox Resonance pipe system Mecha. rear disc brakes 5 mm aluminium chassis  blackLexan bodyworkAnother improvement is the hydraulic disc brake in the front wheels. The chassis of the FG Formula 1 Competition is built on a 5mm aluminium chassis and all screws at the bottom of the chassis are countersunk. The front and rear axle carriers as well as the engine unit are connected to each other over the entire length of the chassis, so that almost the rigidity of a monocoque chassis is achieved. The engine is fixed in place using a quick-release fastener, making it possible to change the engine quickly. The rear axle is driven by several smooth-running spur gears and an FG ball drive on the rear axle. The clutch bell is held by a separate flange bearing to reduce the load on the crankshaft. The front and rear axle with versatile adjustment options such as camber, caster, etc. consists of aluminium wishbones at the bottom. Sturdy aluminium rear axle plates reduce wear on the rear axle and provide enormous driving stability. Four oil-pressure shock absorbers, which are actuated via a push-rod suspension, and stabilisers ensure optimum ground contact.The model is powered by a powerful 26 cc engine with airbox and resonance silencer.The chassis is supplied with tuning bowden cable brakes for the rear axles.Equipment of the FG Formula 1 Competition kit 5 mm aluminium chassis, 26 cm³ engine, intake noise filter, tuning resonance silencer, FG gear drive, ball drive, complete rear axle and front axle carrier unit with integrated quick engine mounting, double aluminium wishbone mountings, aluminium triangular wishbones at the bottom of the rear axle and front axle, front and rear aluminium steering knuckles, ball bearing servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes at the front and rear. Servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes front and rear, anti-roll bar for front and rear axle, 10 mm aluminium balls, polycarbonate body, polyamide front spoiler, receiver box, competition tyres with tyre inserts.  The models are supplied as a kit with assembly instructions. The body parts are made of crystal-clear polycarbonate for self-painting. These parts are not included and must be ordered or delivered separately if installation is required!To complete the models, you will also need: -  1 remote control system (transmitter, receiver) -  1 large servo for the steering (approx. 40 - 50 kg)-  2 servos for throttle/brake (approx. 20 - 30 kg)-  batteries and charger. IncludetZenoah 26cc engineClear bodyshell and polycarbonate spoilerMechanical brakes rearHydr. brakes frontDimensionsLength: 960mmWidth: 440mmHeight: 230mmWheelbase: 620mmFormular 1 models in action!Drive:2WDMotorization:GasRTR:Without RTRScale:1/5