Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

8452/06 FG Rear tuning disk brake for 1:5 Trucks and 1:6 Off-Road

Product information "8452/06 FG Rear tuning disk brake for 1:5 Trucks and 1:6 Off-Road"

Genuine FG spare/option part.

The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models.

The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms.

We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights.

In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.

Additional equipment for front and rear tuning disk brake:
  • 8472/01 Flexible bowden cables
  • 8474/05 Alloy bowden cable holder
  • 8469 Alloy guiding plate with ball bearing
  • 8479 Steel bush
  • 8448 Stud bolt for brake lining
  • 8458/02 Lasered tuning disk brake
  • 8457/03 Competition brake lining

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €169.90* €219.90* (22.74% saved)

Average rating of 0 out of 5 stars

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

€299.90*

Accessories / Spare parts

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

8457/03 FG Competition brake lining glued for FG and HPI disc brakes
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*
%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €169.90* €219.90* (22.74% saved)

Average rating of 0 out of 5 stars

1001 Mecatech twin piston hydraulic brake, set incl. brake bleeding set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.

€299.90*

Average rating of 0 out of 5 stars

6020 FG Collet 2,1 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Average rating of 0 out of 5 stars

6106/05 FG Snap rings 19,5mm for wheel square
Genuine FG spare/option part. Securing ring for positioning the brake disk on 11.5, 14 and 17mm square drives.Inner diameter unstretched 19.5 mm.Part is delivered in silver or black color from vendor!Contents:4 pieces

€4.90*

Average rating of 0 out of 5 stars

6738/03 FG Self-locking hexagon nut M3, 15 pcs.
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.80*

Average rating of 0 out of 5 stars

7137/01 FG Bolt for cable holder rear brake - 1pce.
Spare part for , , , , and .

€3.30*

Average rating of 0 out of 5 stars

8448 FG Stud bolt for brake lining - 4pcs.
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.

€13.90*

Average rating of 0 out of 5 stars

8458/02 FG Tuning Brake disk lasered
Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces

€45.90*

Average rating of 0 out of 5 stars

8459/01 FG Brake shaft - 2pcs.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8461/01 FG Brake lever for disk brake front/rear - 2 pcs.
Spare part for , , , , and .

€8.90*

Average rating of 0 out of 5 stars

8462/05 FG Balance
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces

€6.90*

Average rating of 0 out of 5 stars

8463/01 FG Pressure spring - 2pcs.
Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .

€4.60*

Average rating of 0 out of 5 stars

8465 FG Collet set
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces

€8.90*

Average rating of 0 out of 5 stars

8468 FG Screw set for disk brake front/rear
Genuine FG spare/option part. Spare part for 6250/01, 6250/02, 6250/05, 6250/06, 8450/01, 8450/05, 8452, 8452/05, 10450, 10451, 10452 and 10453. Contents:1 set

€4.30*

Average rating of 0 out of 5 stars

8469 FG Guiding plate ball-beared
Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces

€39.80*

Average rating of 0 out of 5 stars

8469/01 FG Ball bearing flange for guiding plate
Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

8470 FG Alloy brake caliper left for rear disk brake - 1pce.
Spare part for , , , , , , , , , , and .

€29.50*

Average rating of 0 out of 5 stars

8471 FG Alloy brake caliper right for rear disk brake - 1pce.
Spare part for , , , , , , , , , , and .

€29.50*

Average rating of 0 out of 5 stars

8472/01 FG Flexible long bowden cable for rear disk brake - 1pce.
Cable: 350 mmSheath: 270 mmSpare part for , , , , and .

€17.90*

Average rating of 0 out of 5 stars

8473/01 FG Flexible short bowden cable for rear disk brake - 1pce.
Cable: 225 mmSheath: 150 mmSpare part for , , , , and .

€17.50*

Average rating of 0 out of 5 stars

8474/05, FG Alloy bowden cable holder short new, 2 pcs.
Revised alloy bowden cable holder short with longer brake lever distance according to the sinking of the pressure spring.Hole center distance 11 mm

€23.90*

Average rating of 0 out of 5 stars

8475 FG Adjustment screw for rear disk brake - 1pce.
Spare part for , , , , , , , , , , and .Thread size M6x17Bore 2 mmWrench size 8 mmTotal length 25 mm

€5.90*

Average rating of 0 out of 5 stars

8479 FG Steel bush for brake caliper - 2pcs.
Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .

€7.90*

Customers also bought

Average rating of 0 out of 5 stars

y1525 Universal screws/nuts/washer set for all FG vehicles
Complete universal set of screws, nuts and washers for all 1/5 and 1/6 scale FG vehicles (except Competition/Evo alloy models).The set includes a total of 309 screws, nuts and washers in different quantities.13 sizes of cap head screws8 sizes of CSH screws3 sizes of button head screws7 sizes of set screws6 sizes of washers3 sizes of self-locking nuts2 sizes of nuts9 sizes of self tapping screws3 sizes of CSH self tapping screws3 sizes of pan head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:3 piecesM3x82 piecesM3x161 piecesM3x183 piecesM3x209 piecesM4x202 piecesM4x252 piecesM4x301 piecesM4x451 piecesM5x162 piecesM5x251 piecesM6x103 piecesM6x401 piecesM6x75CSH screws in 10.9:2 piecesM4x162 piecesM4x258 piecesM4x401 piecesM5x142 piecesM5x256 piecesM5x302 piecesM5x351 piecesM6x16Button head screws in 10.9:10 piecesM4x82 piecesM4x142 piecesM5x40Grub screws:2 piecesM4x305 piecesM5x52 piecesM5x164 piecesM5x252 piecesM5x302 piecesM5x408 piecesM6x6Washers:2 piecesM3,2510 piecesM4,215 piecesM5,33 piecesM6,410 piecesM4,23 pieces10x16x1Self-locking nuts:3 piecesM316 piecesM410 piecesM5Normal nuts:8 piecesM54 piecesM5Sheet metal screws DIN 7981 Torx:7 piecesM2,9x9,52 piecesM2,9x131 piecesM2,9x192 piecesM2,9x226 piecesM4,2x9,59 piecesM4,2x1314 piecesM4,2x1614 piecesM4,2x225 piecesM4,2x32Countersunk head senk sheet metal screws DIN7982 Torx:14 piecesM4,2x1348 piecesM4,2x162 piecesM4,2x32Button head screws DIN 7985 Phillips (Kreuzschlitz) Verz. 4.8:4 piecesM3x41 piecesM3x252 piecesM4x14

€39.90*

Average rating of 0 out of 5 stars

8494/01 FG Torx screw set for alloy differential
Genuine FG spare/option part.Torx screw set suitable for all FG alloy differential gears.Part is delivered in silver or black color from vendor!

€7.90*

Average rating of 0 out of 5 stars

7058 FG Body screws with stop nuts, 15 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Set includes:15 x Allen head body screws M3 x 10 mm15 x Washers15 x M3 Hexagon nut

€7.00*

Average rating of 0 out of 5 stars

6110 FG E-clips set for 1:5 and 1:6 models
Genuine FG spare/option part. Universal safety clips set.Part is delivered in silver or black color from vendor!Content:3 mm5 mm6 mm7 mm

€9.90*

Average rating of 0 out of 5 stars

6734/02 FG Washers, steel 2,7mm, 15 pcs.
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!

€2.30*

Average rating of 0 out of 5 stars

6734/05 FG Washers steel 5,3mm - 15pcs.
Part is delivered in silver or black color from vendor!

€2.60*

Average rating of 0 out of 5 stars

6745 FG Shim ring 10x16x1mm - 10pcs.
Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€5.30*

Customers also viewed

Average rating of 0 out of 5 stars

8450/05 FG Front tuning disk brake for nearly all FG-models
Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining

€169.95*

Average rating of 0 out of 5 stars

8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

Average rating of 0 out of 5 stars

8452 FG Rear disk brake - set
Low-priced retrofitable disk brake for the rear wheels. Suitable for all 1:5 and 1:6 models and Race-Trucks. In connection with the front disk brake very high brake power, optically very effective. We recommend to steer over 2 servos if you install the front and rear disk brake. We deliver the disk brake without uprughts.Contents:1 piece

€122.50*
%

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €169.90* €219.90* (22.74% saved)

Average rating of 0 out of 5 stars

8450/08, FG Conversion kit to Tuning disk brake f./r., set
Conversion kits to convert a front or rear disk brake to a Tuning disk brake for front or rear axle.Kit 06250/08 fits all rims from Ø100mmKit 08450/08 fits all rims up to Ø90mm.

€125.95*

Average rating of 0 out of 5 stars

8475 FG Adjustment screw for rear disk brake - 1pce.
Spare part for , , , , , , , , , , and .Thread size M6x17Bore 2 mmWrench size 8 mmTotal length 25 mm

€5.90*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-530 with Team Truck body and HT-Edition
Former: "Atego" Truck.The Sportsline 08 quality at a reasonable price for beginners. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical description:The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 20T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings .. The models are equipped with a powerful 23 cm³ combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURDimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mmTrucks in action!

€1,349.95*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency