8463/01 FG Pressure spring - 2pcs.
€4.60
Available
Product information "8463/01 FG Pressure spring - 2pcs."
Inner diameter 3.3 mm
Wire diameter 0.3 mm
Spare part for , , , , , , , , , , and .
Login
Customers also bought
Cable: 305 mmSheath: 220 mmSpare part for , , , , and .
Genuine FG spare/option part. Spare part for :6250/018450/0184521045010451Content:4 pieces
Genuine FG spare/option part.For adjustment of the bevel gears in the differential.Dimensions:2 pieces: each 5 x 17 x 0.1 mm2 pieces: 8 x 20 x 0.1 mmContents:4 pieces
Cable: 350 mmSheath: 270 mmSpare part for , , , , and .
Genuine FG spare/option part. Fits Zenoah G230/260/240/270/290/320.Reinforced clutch spring for the Zenoah standard clutch. Engagement speed approx. 8000rpm. The engine has a higher torque and therefore more power for acceleration according to the raised operative speed. Suitable for all Zenoah engines.Contents:1 piece
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.
Customers also viewed
Genuine FG spare/option part. Recommended accessory for installation of tuned pipes using teflon tube connectors. Contrary to standard hose clamps this version is self-readjusting down until 20 mm inner diameter!Width 12 mm.Content:2 pieces
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces
Genuine FG spare/option part. Improved servo saver parts A + B with changes in detail. A change of the slope angle improves the protective function. Depending on the steering servo and the desired hardness of the servo saver red and blue FG servo saver springs are recommended. Fits the 2010 model servo saver.Contents:2 pieces
For old system.Cable : 225 mmSheath : 150 mm.1 pieces
Genuine FG spare/option part.Spare part for FG 9439.Length: 10.5 mmInner diameter: 5.9 mmWire diameter: 0.65 mmContents:2 pieces
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece
Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)Pinions up to 16T can be used on the layshaft as well.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Teeth:Item no.:13 Teeth HT y026814 Teeth FG 604614 to 48 Teeth HT y011615 to 48 Teeth FG 604715 to 48 Teeth HT y19354 wide16 to 48 Teeth FG 643116 to 48 Teeth FG 6431/1 wide17 to 48 Teeth HT y19355-116 to 46 Teeth HT y011917 to 46 Teeth HT y1935518 to 46 Teeth FG 643219 to 46 Teeth HT y1935718 to 44 Teeth HT y012319 to 44 Teeth FG 6432/220 to 44 Teeth FG 643321 to 44 Teeth HT y1935820 to 42 Teeth HT y090421 to 42 Teeth FG 7431/2122 to 42 Teeth FG 743121 to 40 Teeth FG 7432/2122 to 40 Teeth FG 7432/2223 to 40 Teeth FG 7432/2324 to 40 Teeth FG 743225 to 40 Teeth FG 7432/2526 to 40 Teeth HT y1936426 to 38 Teeth FG 7433Contents:1 piece