7902/01 FG Electric engine 980KV Brushless
€207.90
Available
Product information "7902/01 FG Electric engine 980KV Brushless"
Powerful brushless engine, high torque, sintered neodymium magnets, hand-wound long working life.
Adapter bushing FG # 66514 is required for installation of steel pinions with 10 mm bore diameter. Suitable for 1/6 buggy / monster / street cars.
Technical data:
- Max. voltage: 22,2V (6S)
- Max. current: 193A
- Max. 30.000RPM
- Power in watt: 4250W
- Rotor poles: 4
- IO: 2.8A
- Resistance: 0.0128
- Length: 82mm
- Diameters: 55 / 58mm with fins
- Weight: 880g
- Shaft Diameter: 8mm
- Length of extend shaft: 30mm
Content:
- 1 piece
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Accessories / Spare parts
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece
Genuine FG spare/option part. For connecting the 200A brushless controller to one or two LiPo batteries.Gold plated 8 mm diameter connectors.Content:2 pieces
Customers also bought
New 160A controller from FG for 1/5 models. Technical data: -Battery connections EC8 - 3-6S LiPo - BEC 6V 7.4V 8.4V 1 piece
Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece
Customers also viewed
Genuine FG spare/option part. Technical data:4.000W 14,8V (4S) Maxi: 193ARPM maxi: 30.000 rpmDimensions: 82 x 58 mmAxle: 30 x 8mmWeight: 880gContent:1 piece
Genuine FG spare/option part. For motors with and without sensor. Only high-quality components were used in the construction! The controller has many programmable parameters, low voltage protection and a temperature shutdown.Parameters can be programmed via the set button, a programming card or a programming box and firmware updates can be performed using the programming box with a PC.Technical data:Continuous current: 160APeak current burst: 1050ABattery: 3S - 8S LiPo or 9-24 cells NiMHBEC: 6V/7.2 V - 3A/6 ADimensions: 70x56x46.5 mmWeight: 240gContents:1 piece
Product information "Hobbywing Ezrun SL 56118SD G2 650kV 4pol, 8mm Shaft for 1:5"The Ezrun 56118SD G2 motor offers convincing performance for 1/5 buggies and trucks. Powerful and made of high quality materials, this engine promises long-lasting fun and a long time. The innovative new sensor interface and rubber cover bearing also provide better waterproof and dustproof effect than traditional and comparable sensor motors.FeaturesNew waterproof sensor cableCompletely sensor-controlled system for more acceleration and greater power development.Best used with the Hobbywing Ezrun MAX5 HV G2 ESCWith high-precision encoder to detect rotor position to counteract interference and enable stable running in sensor mode.Use of high-quality components such as CNC-machined aluminum housing, high-purity copper windings, high-strength explosion-proof rotor, etc. for high durability and smooth running.Easily dismantled for maintenance workTechnical SpecificationsType:Brushless, SensoredkV Rating:650kVNo-Load Current:5.5ACells LiPo:8-12SPoles:4Diameter:56mmLength:119.2mmShaft Diameter:8mmShaft Length:30mmWeight:1272gApplication:1/5 Buggy, TruckDelivery1x Motor1x Manual
Genuine FG spare/option part. 7902 FG Electric engine 1300KV BrushlessTechnical data:4.000W 14,8V (4S) Maxi: 193ARPM maxi: 30.000 rpmDimensions: 82 x 58 mmAxle: 30 x 8mmWeight: 880g7909 Brushless ESC 150ATechnical data:Voltage range: 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185g Contents:1 set
Product information "Hobbywing Ezrun SL 5687 1100kV 4pol, 8mm Shaft for 1:6"Technical Data:Scale: 1/6Sensor type: sensorlessPole: 4RPM/Volt: 1100 kvOuter Diameter: 56mmLength: 87mmShaft Diameter: 8mmApplication: 1/6 with 3-8s Lipo, 1/5 Light Load with 3-8s Lipo