8450/05 FG Front tuning disk brake for nearly all FG-models
€169.95
Available
Product information "8450/05 FG Front tuning disk brake for nearly all FG-models"
Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.
The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms.
We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights.
In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.
Additional equipment for front and rear tuning disk brake:
- Flexible bowden cables
- Alloy guiding plate with ball bearing
- Steel bush
- Stud bolt for brake lining
- Lasered tuning disk brake
- Competition brake lining
Login
Accessories / Spare parts
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.
Spare part for , , , , , , , , , , and .
Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces
Spare part for , , , , , , , , , , and .
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces
Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .
Cable: 305 mmSheath: 220 mmSpare part for , , , , and .
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces
Genuine FG spare/option part. Spare part for 6250/01, 6250/02, 6250/05, 6250/06, 8450/01, 8450/05, 8452, 8452/05, 10450, 10451, 10452 and 10453. Contents:1 set
Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces
Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces
Revised alloy bowden cable holder short with longer brake lever distance according to the sinking of the pressure spring.Hole center distance 11 mm
Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .
Alternatives
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
Customers also bought
Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces
Complete with mounting kit, side flaps and nuts & bolts. The rear wing comes unpainted (clear). Dimensions wing:Width: 280 mmDepth: 45 mmDimensions wing mounts:Height: 28 mmDimensions side flaps:Width: 50 mmHeight: 30 mmPainting tips:
Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece
Genuine HT spare/option part.Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:1 piece / 33 meters
Content: 1000 Zentimeter (€0.80 / 100 Zentimeter)
Customers also viewed
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining
Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces
Low priced retrofitable front axle disk brake for all FG 1:5, 1:6, Off-Road 2WD and all 4WD models. also suitable for the 2-damper front axle and the Mono-Shock axle. The disk brake prevents a breaking-out of the rear, has a very sensitive adjustment and is optically very effective. You are able to run this disk brake with the gas servo, but make sure the servo has a minimum regulating power of 6kg. We deliver the disk brake without uprights. Link to the part scout!Content 6020 8093 6105/05 8455 8457/02 8458 8459/01 8461 8461/01 8462/01 8462/02 8462/06 8462/07 8462/05 8463 8464/01 8465
Additional equipment of the front tuning disk brake compared to disk brake :- Flexible bowden cable - Alloy bowden cable holder- Alloy guiding plate with ball bearing- Steel bearing bush- Stud bolt for brake lining- Tuning brake disk- Competition brake lining
Conversion kits to convert a front or rear disk brake to a Tuning disk brake for front or rear axle.Kit 06250/08 fits all rims from Ø100mmKit 08450/08 fits all rims up to Ø90mm.