8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road
€169.95
Currently unavailable
Product information "8452/05 FG Rear tuning disk brake for 1:5 FG Evo Trucks and 1:6 Off-Road"
The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models.
The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms.
We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights.
In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.
Additional equipment for front and rear tuning disk brake:
- 8472/01 Flexible bowden cables
- 8474/05 Alloy bowden cable holder
- 8469 Alloy guiding plate with ball bearing
- 8479 Steel bush
- 8448 Stud bolt for brake lining
- 8458/02 Lasered tuning disk brake
- 8457/03 Competition brake lining
Login
Accessories / Spare parts
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces
Genuine FG spare/option part. Securing ring for positioning the brake disk on 11.5, 14 and 17mm square drives.Inner diameter unstretched 19.5 mm.Part is delivered in silver or black color from vendor!Contents:4 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces
Spare part for , , , , and .
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.
Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces
Spare part for , , , , and .
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces
Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces
Genuine FG spare/option part. Spare part for 6250/01, 6250/02, 6250/05, 6250/06, 8450/01, 8450/05, 8452, 8452/05, 10450, 10451, 10452 and 10453. Contents:1 set
Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces
Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces
Spare part for , , , , , , , , , , and .
Spare part for , , , , , , , , , , and .
Cable: 350 mmSheath: 270 mmSpare part for , , , , and .
Cable: 225 mmSheath: 150 mmSpare part for , , , , and .
Revised alloy bowden cable holder short with longer brake lever distance according to the sinking of the pressure spring.Hole center distance 11 mm
Spare part for , , , , , , , , , , and .Thread size M6x17Bore 2 mmWrench size 8 mmTotal length 25 mm
Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .
Alternatives
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set
Mecatech twin piston hydraulic brakeIt is the best brake for RC cars in the large model range from teh Mecatech FW01 and can be retrfitted to many FG models.Best quality for the highest demands!- The main brake cylinder is equipped with volume compensation and ensures constant braking pressure with good metering.- The brake calipers have a double-piston system and steel brake pads and teh epoxy brake discs ensure short braking distances. Installation instructions!Suitable for all FG off-road 2WD/4WD models (Leopard basis) and also for all FG off-road 2WD and 4WD models on a Marder basis with a laterally angled chassis such as (buggy / monster / stadium with original FG 700 ml tank) only with mounting base.Mounting base for all FG Offroad models:9438/01 a> Aluminum wheel chockWhen installing in an FG Evo 2020, 2020.1, 2020.2 and FG Raceline you need the adapter plates y1515.For FG Evo 12-14 models with the wishbone no. evo-2013-1-st-.html">1100/10 or 1100/11, the brake fits without additional accessories.For FG Evo 04-08 models with the wishbones no. evo-04-08-1st-.html">1100/05 or 1100/05, the brake must be 1100/05.When running wheel squares with Seeger ring, the ring has to be removed.Not for FG Formula 1 models.
Customers also viewed
Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining
Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining
Low-priced retrofitable disk brake for the rear wheels. Suitable for all 1:5 and 1:6 models and Race-Trucks. In connection with the front disk brake very high brake power, optically very effective. We recommend to steer over 2 servos if you install the front and rear disk brake. We deliver the disk brake without uprughts.Contents:1 piece
New adjustable 2-jaw clutch. - High-quality workmanship - Pads are individually replaceable - Individually adjustable to the conditions. For FG, Carson, Losi models and HPI Baja 5B, except FG F1 and EVO2020. 1 piece
Genuine HT spare/option part. Gas-nitrited tuning clutch bell; machined from high grade steel with vents for cooling of the clutch system and holes for easy clutch adjustment. The clutch bell features a significantly reinforced wearing surface which guarantees dimensional stability even under high loads!For best mounting of the pinion the clutch bell shaft has to flats with a 90° offset. As an additional safety device a M5 bolt with washer (included) replaces the E-clip found on stock clutch bells.Suitable for many 1/5 and 1/6 cars, such as all FG (except Formula 1), Carson a.s.o.Contents:1 piece
Genuine FG spare/option part.Fits FG cars with 510 mm and 535 mm wheelbase. Not suitable for Competition and Formular 1 models.Included gears:1st gear: 22T / 42T2nd gear: 24T / 40T2-speed gear box, retrofitting is possible for all FG 1:5 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel. If you use the gearwheel 7424/01 (38 teeth) you need the allow hub A 47 mm 7456/01.
Selfadhesive mirror tape, can be used on the mirrors from the detailing kits. Sheet size approx. 125 x 175 mm (roughly 5" x 7").