Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

8455 FG Alloy brake caliper for front disk brake - 1pce.

Product information "8455 FG Alloy brake caliper for front disk brake - 1pce."

Spare part for , , , , , , , , , , and .

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

Average rating of 0 out of 5 stars

8463/01 FG Pressure spring - 2pcs.
Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .

€8.90*

Average rating of 0 out of 5 stars

8462/01 FG Plastic bush 4/6x5 mm
Genuine FG spare/option part. Spare part for :6250/018450/0184521045010451Content:4 pieces

€3.70*

Average rating of 0 out of 5 stars

8464/01 FG Bowden cable flexible for front disk brake - 1pce.
Cable: 305 mmSheath: 220 mmSpare part for , , , , and .

€18.90*

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

y6107 Wheel squares 18 mm HART-COAT, 9,5 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€14.95*

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

8465 FG Collet set
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces

€8.50*

Average rating of 0 out of 5 stars

8462/05 FG Balance
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces

€6.90*

Average rating of 0 out of 5 stars

8472/01 FG Flexible long bowden cable for rear disk brake - 1pce.
Cable: 350 mmSheath: 270 mmSpare part for , , , , and .

€17.90*

Average rating of 0 out of 5 stars

8459/01 FG Brake shaft - 2pcs.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

y6107/07 Wheel squares 18 mm HART-COAT, 12 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces

€16.45*

Customers also viewed

Average rating of 0 out of 5 stars

8459/01 FG Brake shaft - 2pcs.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8457/02 FG Brake lining glued front/rear standard - 4pcs.
Affordable standard brake lining with good braking deceleration. Glued on a steel plate. Spare part for , , , , and .Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mm

€39.95*

Average rating of 0 out of 5 stars

6250/08, FG Conversion kit to Tuning disk brake f./r., set
Conversion kits to convert a front or rear disk brake to a Tuning disk brake for front or rear axle.Kit 06250/08 fits all rims from Ø100mm.Kit 08450/08 fits all rims up to Ø90mm.

€99.90*

Average rating of 0 out of 5 stars

OS00.004 OSKART Go-cart RTR, 1/2 scale
OSKART, 1/2 scale premium quality RTR go-cart; with 33 cc engine and complete Spektrum DX2 remote control, including servos, charger, and all required accessories!The OS-Kart comes with a powerfull 33 cc engine whin run on regular 2-stroke mix from a gas station. The 0.7 liter tank lasts for a runtime of approx. 45 minutes.The colour combinations each of the OSKART and driver are different.Fully assembled and ready to run!Dimensions:Length: approx. 900 mmWidth: approx. 630 mmHeight: approx. 470 mmWeight (ready to run): 15 kgThe OSKART comes in a special high quality wooden crate.Shipping weight incl. crate: 30 kg! (approx. 66 lbs)

€1,999.00*

Average rating of 0 out of 5 stars

8470 FG Alloy brake caliper left for rear disk brake - 1pce.
Spare part for , , , , , , , , , , and .

€29.90*

Average rating of 0 out of 5 stars

4493/01 FG Alloy servo saver A 04
Genuine FG spare/option part. Spare part for 4493.Contents:1 piece

€27.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency