Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

TT1105 Top Tuning Motor cooling for FG brushless cars, short version.

Product information "TT1105 Top Tuning Motor cooling for FG brushless cars, short version."

Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).

The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.

Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins.


Performance data of the fan:

  • Dimensions: 60 x 60 x 24 mm
  • Operating voltage: 5 - 8.4 V
  • Current: 0.5A
  • Speed: 8.500 1/min @ 8.4 V
  • Flow rate: 39.2 CFM

Scope of delivery:

  • Fan TT1028
  • Short fan mounting frame
  • Protective grille for fan
  • Adapter cable to JR connector
  • Installation hardware

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

TT1027 Top Tuning High-performance fan 50 x 50 x 15 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 50 x 50 x 15 mm can be swapped e.g. for the fan of the ARRMA motor cooling unit or the fans of different speed controllers (e.g. ZTW Beast 200A). The ARRMA application requires approx. 5 mm longer screws due to the 5 mm taller fan (M4x25).The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 50 x 50 x 15 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 10,000 rpm @ 8.4 V Air flow: 28.3 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

TT1028 Top Tuning High-performance fan 60 x 60 x 24 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 60 x 60 x 24 mm can be swapped e.g. for the fan of the ZTW Beast 300A speed controller. For this particular application, M4x40 screws are required instead of the standard M4x30 screws due to the 9 mm taller fan.The air flow is considerably higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 8.4 V Current: 0.5A Speed: 8,500 rpm @ 8.4 V Air flow: 39.2 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

7911 FG Cooling fan for 7900, set
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV.

€39.95*

Average rating of 0 out of 5 stars

ARA390295 ARRMA Motor Fan Set 50mm for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 set

€22.99*

Average rating of 0 out of 5 stars

66518 FG Alum.admission for cooling fan
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV.

€16.90*

Average rating of 0 out of 5 stars

TT1026 Top Tuning High-performance fan 40 x 40 x 10 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size of 40 x 40 x 10 mm can be swapped e.g. for the fans of the FG motor cooling unit or the fans of various speed controllers.The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 40 x 40 x 10 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 16,000 rpm @ 8.4 V Air flow: 16.7 cfm Connector: Dupont 2-pin female (compatible with BEC/Futaba/Universal) Cable length: approx. 17 cm Contents:1 piece

€14.90*

Average rating of 0 out of 5 stars

7911/01 FG Cooling fan for 7900, 2 pcs.
Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV

€25.90*

Average rating of 0 out of 5 stars

ARA390296 ARRMA Motor Heatsink 4685 for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces

€21.99*

Average rating of 0 out of 5 stars

SPMXSEF4 Spektrum Firma Smart 160A w/ CP ESC Replacement Cooling Fan
Genuine Spektrum spare/option part. Contents:1 piece

€10.99*

Average rating of 0 out of 5 stars

AKX018 GPM additional heat sink with fan for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set

€39.90*

Average rating of 0 out of 5 stars

TT1106 Top Tuning Motor cooling for FG brushless cars, long version.
Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Long fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware

€44.90*

Customers also viewed

%

Average rating of 0 out of 5 stars

500304032/ED Carson 1:5 Wild GP Drift Attack Brushless 2.4GHz RTR, 160A / 700kV / up to 8S
Carson Drift Attack special equipment with 65 mm wide front and rear tires!The Carson Wild E Attack is basically the same as the GP version, but instead of the gas engine, a brushless drive unit provides propulsion. In addition to the other motorization, a different receiver box which also carries the drive battery well protected is used.The car comes with completely installed Carson 2.4 GHz remote control, incl. transmitter alkalines, brushless motor with ESC and 35 kg steering servo, as well as a tool set.Motor and esc both allow the use of batteries up to 8S. However, we recommend 6S, as there is a very good compromise between driving performance and run time. One should not forget that the motors performance with 6S is already significantly higher than that of the gas-powered version and that much power needs to be mastered in a comparatively lightweight 2WD car. Motorization Spektrum 160A ESC 56112/700 TT Monster Brushless Motor 700kV Technical details: Up to 80 km/h depending on the battery Differential with steel gears Drift equipment F+H 65 mm wide Aluminium shocks, dust protected Bead-lock rims with off-road tires Aluminium wheel hex drives Ajustable rear wing Completely ballraced 2WD drivetrain Water protected receiver box Aluminium chassis Driving batteries and a charger are still required for driving

€979.90* €1,122.00* (12.66% saved)

Average rating of 0 out of 5 stars

TT1022 Top Tuning brushless conversion kit for Losi 5ive-T/B and Mini with motor and ESC
Genuine Top Tuning spare/option part.This kit includes all required parts for converting a Losi 5ive-T, 5ive-B or Mini into an electric car.Contents:TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and Miniand your choice of Motor and ESC:-  8S Vision : Hobbywing Ezrun MAX5 250A ESC and 56112 ZTW Monster Brushless Motor 700 kV - 12S Vision+270€ : y1549/01: Hobbywing Ezrun MAX4 300A 12S ESC with TT70120 620KV Brushless motor TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B and MiniAll aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 155 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Contents:Motor mount, rear clamp Battery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop bands4 hook-and-loop bands to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws Hobbywing Ezrun MAX5 ESC 250A with Top Tuning 700KV Brushless Motor 8S: Specifications 56112 ZTW Monster Brushless motor:Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260g Specifications Hobbywing Ezrun MAX5 ESC 250A: technical Data :Type: 1/5 Brushless Sensored Current (continuous/short): 250A / 1600A Input voltage: 6-12S LiPo BEC: 6V/7.4V/8.4V @8A (switch mode) Motor types: Brushless motors (with/without sensor) Motor limits: - 8S Lipo: KV &lt;= 1200 - 12S Lipo: KV &lt;= 800 56118 motor Fan: Yes, operated via the BEC Programming: LED programming card LCD programming box (G2) OTA programming module Separate programming connection Waterproof: Yes Output: 8.00mm Bullet Connector (female) Size: 94.5x59.4x50.9mm Weight: 428.5g Applications: 1/5 buggy, truck  Alternativ 12S: Hobbywing Ezrun 300A 12S Regler mit Top Tuning 620KV Brushless Motor: Technische Daten Regler ESC:Strom (dauer/kurz)300A / 2000AMotortyp:Sensor/Sensorlose Brushless MotorenMotorlimit:12S LiPo: kV <= 600 (70125er Größe)LiPo-Zellen:6-12SBEC:6V / 7.4V / 8.4V mit 10A (schaltbar)Lüfter:Ja (Versorgung über eingebautem BEC)Programmiereingang:Lüfter / PRG-EingangProgrammierung:LED Programmierkarte, LCD Programmierbox, OTA ProgrammiermodulGröße:125x85x61.7mmGewicht:775.4g Max. Amps: 175AMax. Voltage: 42VMax. Power: 7.350WKV (RPM/Volt): 700KVMounting hole depth: 8 mmBolt pattern: 4 x M4 on each 30 mmCase diameter: 57,8 mmCase length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1260gSpecifications TT70120 Top Tuning Beast Brushless motor 620kV:Max. Amps: 200AMax. Voltage: 8-14SMax. Power: 10.000WKV (RPM/Volt): 620KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 70 mmCase length: 120 mmFree shaft length: 30 mmShaft diameter: 8 mmGewicht: 1730g

From €599.90*
%

Average rating of 0 out of 5 stars

HW38010603 Hobbywing Ezrun MAX5 HV Combo 56118SD 650kV G2
Product information "Hobbywing Ezrun MAX5 HV Combo 56118SD 650kV G2"Discover impressive performance with the second generation of the Ezrun MAX5 HV G2 ESC - now available in the combo version with the matching 56118SD G2 motor with 650kV! This enhanced MAX5 series with 250A offers numerous innovations, making the driving experience with 1/5th scale buggies and trucks even more thrilling.Compared to the regular MAX5 combo, the sensor mode has been significantly improved and equipped with a waterproof cable for reliable performance. The power has been increased by a whopping 18%, while reducing heat generation, resulting in even more power and efficiency. The ESC's strong, explosive, and stable output power, along with excellent low-speed linearity, ensures it excels in various applications. Quick acceleration, high-speed maneuvers, jumps, and slower driving are no problem at all. Overall, the ESC has been so greatly improved that you won't want to look back. Especially when paired with the EZRUN 56118SD G2 motor, you also benefit from motor overheating protection and turbo timing adjustment.It's the perfect way to dive right into the 1/5th scale world with ease!Features:Built-in ultra-strong switching mode BEC to support various servos.Up to 24° of turbo timing adjustment (when using a 56118 G2 motor).Data logging function.12 adjustable parameters.Increased capacitor capacity by 45%.New waterproof sensor cable.Fully sensored system for enhanced acceleration and more powerful performance.With the EZRUN 56118SD G2 motor, the MAX5 HV G2 features integrated motor overheat protection.Easy-to-disassemble motor for maintenance work.Technical Specifications:ESCType:Brushless SensoredCurrent (cont./peak):250A / 1600ANo. of Cells:6-12S LiPoMotor Limit:8S Lipo: KV <= 120012S Lipo: KV <= 800 56118 MotorBEC:6V/7.4V/8.4V @8A (Switch Mode)Fan:Yes (BEC)Programming:LED Program CardLCD Programming Box (G2)OTA Bluetooth ProgrammerSeperate Programming PortWaterproof:YesDimensions:94.5x59.4x50.9mmWeight:428.5gApplication:1/5 Buggy, TruckMotorType:Brushless, SensoredkV Rating:650kVNo-Load Current:5.5ANo. of Cells:8-12S LiPoPoles:4Diameter:56mmLength:119.2mmShaft Diameter:8mmShaft Length:30mmWeight:1272gApplication:1/5 Buggy, TruckDelivery:1x Ezrun MAX5 HV G2 ESC with 250A1x 56118SD G2 Motor with 650kV1x Manual

€371.70* €393.00* (5.42% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency