Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

10452 FG Tuning disk brake front for F1 - set

Product information "10452 FG Tuning disk brake front for F1 - set"

Additional equipment of the front tuning disk brake compared to disk brake :
- Flexible bowden cable
- Alloy bowden cable holder
- Alloy guiding plate with ball bearing
- Steel bearing bush
- Stud bolt for brake lining
- Tuning brake disk
- Competition brake lining

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson
Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

Average rating of 0 out of 5 stars

8457/03 FG Competition brake lining glued for FG and HPI disc brakes
Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*

Average rating of 0 out of 5 stars

6020 FG Collet 2,1 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Average rating of 0 out of 5 stars

6565/16 FG Cable ties black 2,5x165 mm - 50pcs.
Item N° 6565/16 Cable ties black 2,5x165 mm - 50pcs.Black cable clamps, indespensable to RC-car drivers for installation of batteries, receiver a.s.o.

€4.90*

Average rating of 0 out of 5 stars

6738/03 FG Self-locking hexagon nut M3, 15 pcs.
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€2.80*

Average rating of 0 out of 5 stars

8093 FG Brake cable bracket - 1pce.
Spare part for , , , , and .

€5.50*

Average rating of 0 out of 5 stars

8448 FG Stud bolt for brake lining - 4pcs.
Stud bolt with double sided thread for well-running brake linings, no jamming of the brake linings possible. Suitable for all mechanical disk brakes.

€13.90*

Average rating of 0 out of 5 stars

8455 FG Alloy brake caliper for front disk brake - 1pce.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8458/02 FG Tuning Brake disk lasered
Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces

€45.90*

Average rating of 0 out of 5 stars

8459/01 FG Brake shaft - 2pcs.
Spare part for , , , , , , , , , , and .

€27.90*

Average rating of 0 out of 5 stars

8461/01 FG Brake lever for disk brake front/rear - 2 pcs.
Spare part for , , , , and .

€8.90*

Average rating of 0 out of 5 stars

8462/05 FG Balance
Genuine FG spare/option part. Spare part for:6250/016250/026250/056250/068450/018450/0584528452/0510450104511045210453Content:2 pieces

€6.90*

Average rating of 0 out of 5 stars

8463/01 FG Pressure spring - 2pcs.
Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .

€4.60*

Average rating of 0 out of 5 stars

8465 FG Collet set
Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces

€8.90*

Average rating of 0 out of 5 stars

8468 FG Screw set for disk brake front/rear
Genuine FG spare/option part. Spare part for 6250/01, 6250/02, 6250/05, 6250/06, 8450/01, 8450/05, 8452, 8452/05, 10450, 10451, 10452 and 10453. Contents:1 set

€4.30*

Average rating of 0 out of 5 stars

8469 FG Guiding plate ball-beared
Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces

€39.80*

Average rating of 0 out of 5 stars

8469/01 FG Ball bearing flange for guiding plate
Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

8474/06, FG Alloy bowden cable holder long new, 2 pcs.
Revised alloy bowden cable holder long with longer brake lever distance according to the sinking of the pressure spring.Hole center distance 19 mm

€23.90*

Average rating of 0 out of 5 stars

8479 FG Steel bush for brake caliper - 2pcs.
Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .

€7.90*

Average rating of 0 out of 5 stars

10450/01 FG Bowden cable for front disk brake for F1 - set
Cable: 465 mmSheath: 385 mmSpare part for .

€19.70*

Average rating of 0 out of 5 stars

10451/05 FG Servo rods for rear disk brake F1
Genuine FG spare/option part. Spare part for .Content:2 pieces

€7.90*

Customers also bought

Average rating of 0 out of 5 stars

10259 FG Body detail kit F1
Genuine FG spare/option part.Contents:1 set

€15.00*

Average rating of 0 out of 5 stars

FG Formula 1 Sportsline
Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,299.00*

Average rating of 0 out of 5 stars

10453 FG Tuning disk brake rear for F1 - set
Additional equipment of the front tuning disk brake compared to disk brake :- Flexible bowden cable - Alloy bowden cable holder- Alloy guiding plate with ball bearing- Steel bearing bush- Stud bolt for brake lining- Tuning brake disk- Competition brake lining

€148.75*

Customers also viewed

Average rating of 0 out of 5 stars

8450/05 FG Front tuning disk brake for nearly all FG-models
Genuine FG spare/option part. Front tuning disk brake for all FG 1:5 models and Race-Trucks, the current version from Evo, with 2-damper front axle and the Mono-Shock axle except Formular 1 and Leopard.The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimum regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:Flexible bowden cablesAlloy guiding plate with ball bearingSteel bushStud bolt for brake liningLasered tuning disk brakeCompetition brake lining

€169.95*

Average rating of 0 out of 5 stars

2005/02 FG Upright with rear left brake caliper for Evo 04
Genuine FG spare/option part. Suitable for Collari rear hydraulic brake (2005).Contents:1 piece

€107.90*

Average rating of 0 out of 5 stars

3000-16 Mecatech Expert brake pad return spring
Genuine Mecatech spare/option part. Contents:8 piece

€7.50*

Average rating of 0 out of 5 stars

10451 FG Rear disk brake for F1 - set
Retrofitable bowden cable disk brakes for Formula 1 Sportsline and Competition models. Essentially improved brake power compared to the standard brake, sensitive adjustment.

€99.99*

Average rating of 0 out of 5 stars

8461 FG Brake lever and servo rods - 2pcs.
Spare part for , , , , , , , , , , and .

€6.30*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency