75106 HPI Body clips 6 mm, black

€6.27*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: hpi.h75106

Product information "75106 HPI Body clips 6 mm, black"

Genuine HPI spare/option part.

Fits a huge range of RC cars and trucks, and conveniently packaged in packs of 20 for quick replacement. Cool black colour to match every paint scheme.

Content:

20 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

A059 Carson split pins small for Wild GP Attack

Genuine Carson spare/option part. Contents:10 pieces

€6.90*

Kunden haben auch gesehen

B075 HPI Bushing, 6 x 10 x 3 mm

Genuine HPI spare/option part. Dimensions: 6 x 10 x 3 mm.Content:10 pieces

€8.78*

y0428/03 Extension cable universal

In case the battery cable is not long enough.Contents:1 piece

€9.90*

Tamiya spray paint PS-58 pearl clear

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€135.50* / 1000 Milliliter)

€13.55*

8143 FG Body set BMW 320si WTCC 2 mm, painted

Genuine FG spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included. The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmContents:1 piece

€289.95*

FG Sportsline with Porsche GT3 RSR body shell, 23cm³ Engine HT-Edition

The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 510 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.Dimensions: Length: 890 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURTouring cars in action!Painting tips:

Variants from €1,299.90*

€1,469.80*

Configure now

6013 FG Body clips

Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€4.95*