y1002 Vehicle decal set Pajero like FG 6217/01

€13.30*

Available

Product number: y1002

Product information "y1002 Vehicle decal set Pajero like FG 6217/01"

Genuine FG spare/option part.

Contains the stickers of the headlights, the rear lights and the radiator grill.

Not included are the advertising labels for the original design. Please order separately.

Dimensions:

410 x 230 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y1395 Genuine LOCTITE 7063 cleaner

The ideal cleaner for pretreatment of Lexan body shells when are to be applied! Decals or detailing kits will stick significantly better to a body shell cleaned with LOCTITE 7063. Also great for removal of "battle scars" from the body shell. But note: The cleaner should not come in contact with the printed surface of the decals!Use to prepare surfaces to be bonded. The product flashes off very quickly and it allows cleaning directly prior to adhesive/sealant application. It is non-corrosive and non toxic.Application:Spray a sufficient amount of product on the surface to be cleaned and wipe while still wet to ensure heavy contamination and excess solvent is removed.Content:400 ml

Content: 400 Milliliter (€37.25* / 1000 Milliliter)

€14.90*

Kunden haben auch gesehen

64155/02 FG Stickers Truggy wheel, set

Genuine FG spare/option part.

€4.90*

Tamiya spray paint PS-62 Pure Orange (ENEOS)

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€111.90* / 1000 Milliliter)

€11.19*

LOS252121 Losi Outdrive Cup, Center, 5mm Pin for DBXL-E 2.0

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

2012-217 Mecatech Radio Plate Big Servo (for short car)

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€95.70*

R198 UFRC Ball B for anti-roll bar

Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:2 pieces

€11.90*

%

y0617 The offroad super combination - Front V-Pin / Rear Mammoth, 1 pair each (2 pairs in total)

The offroad tire combination!V-Pin front and Mammoth wide tires in rear are the unbeatable combination for offroad use.combi set:Mammoth ready glued: 99,90 EURV-Pin ready glued: 78,80 EURTotal: 178,90 EUROffer price: 99,99 EURDescription for V-Pin tires:The V-pin competition tire is particularly suitable for tracks with loose and sandy surface.The high tread profile, extended to the tire shoulder requires a high manufacturing cost.This tread design guarantees an extremely high side traction and provides maximum propulsion especially on surfaces like sand and loose soil for optimum. By cutting of the tread profile of the V-pin tires you can adjust your car's handling easily. The partly or nearly complete removal of the V-pin tire's tread on the outside of the tire, greatly affects the tire's side bite when cornering.Summarized: removing tread from V-Pin tires on the front axle will reduce oversteering, calm your car and make it easier to drive.When oversteering is extreme (e.g. high grass) you may even start cutting the tread on the inside shoulder. This can prevent your car from those annoying traction rolls.Diameter: 163 mmWidth: 65 mmPrices of the components V-Pin:V-Pin tires EUR 39.90 EUR / pairV-Pin tire inserts EUR 9.90 EUR / pairRims FG 6105/01 EUR 14.90 EUR / pairglue set y0067 EUR 13.30 EUR Total EUR 78.80 EUR Description for Mammoth tires:Extra wide tire mounted and glued on genuine 1/6 scale FG buggy rims 6105/01 with extension ring!The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. Diameter: 165 mmWidth: 80 mmRim with 18 mm square driveThe Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! Where other tires spin helplessly the Mammoth provides serious traction. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Combination for the HPI Baja and 5T cars will the rim extension rings glued on the inside!Unit prices Mammoth:Mammoth tires extra wide: 47.20 EUR / pairMammoth inserts extra wide: 9.90 EUR / pairgenuine FG wide track rims 6105/01: 14.90 EUR / pairgenuine FG rim extension rings 6436: 14.90 EUR / pairmounting + glueing rims / extensions / inserts / tires: 13.00 EUR Total: 99.90 EUR Mammoth ready glued: 99,90 EURV-Pin ready glued: 78,80 EURTotal: 178,90 EURIntroductory price: 99,99 EUR Also suitable for:With the following wheel adapter: y1183 Rim adapter

€99.99* €178.70* (44.05% saved)

Cutsomers also bought

6540 FG Receiver box

Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€13.90*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

7333/02 FG Header gasket with heat shield for all Zenoah, CY, Fuelie and more

Genuine FG spare/option part.Fits Zenoah (G230, G240, G260, G270, G290, G320), Chung Yang (CY), Fuelie and HPI engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContenst:1 piece

€8.50*

8466/01 Stainless steel wheel shafts for FG 2WD, 62.5 mm

The wheel shaft is made from stainless steel and precision ground. This insures a perfect fit and prevents corrosion.A special nut with a serrated locking flange will keep the wheel in place. The flanged button head screw replaces the usual E-clipDirect replacement for FG 8466.Contents:2x Wheel shafts2x Nuts2x Screws

€12.90*

6217 FG Team decals Pajero

Genuine FG spare/option part. Contains the advertising labels for original design. The decal set contains no headlights, rear lights etc.Please order separate.Contents:1 piece

€26.90*