Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece
Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Available in the colors black or white.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece
The wheel shaft is made from stainless steel and precision ground. This insures a perfect fit and prevents corrosion.A special nut with a serrated locking flange will keep the wheel in place. The flanged button head screw replaces the usual E-clipDirect replacement for FG 8466.Contents:2x Wheel shafts2x Nuts2x Screws
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.
Genuine HT spare/option part. rc-car-online lettering with correspondig logo. All decals are cutted with a plotter. Dimensions:Sheet with car logos: 450 x 160 mmSheet with rc-car-online letterings: 450 x 140 mmContents:1 piece
Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Available in the colors black or white.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
Genuine HT spare/option part. Decal sheet with logos from several rc-car and supplies manufacturers. All decals are cutted with a plotter. List of manufacturers:rc-car-online.deSmartechLightscaleMecatechHPI-RacingRC-PaintRoadiesFGSpektrumClark´sLosiHorizon HobbySpeed-TecGRPBigscalerGPMPMTZenoahMultiplexLRPChung YangMotulHitecDimensions:220 mm x 330 mmContents:1 piece
y3017 Elasto film:
y3017/E On Elasto film, + 100%+ 19.9EUR
Genuine HT spare/option part. Universal sponsor decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.All logos are 40 mm wide, their heights differ depending on the logo; four logos each per sheet.With logos from: Kenwood, Sparco, Shell V-Power, Sonax, Recaro, O-Z Racing, Hankook, ABT, Michelin, H&R, Eibach, Castrol, Akrapovic, Bosch, Bilstein.Size (Height x Width):Complete sheet: 310 mm x 450 mmThis decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece
The DX6C is the perfect savvy solution for bashers, boaters and scalers who want a staggering list of advanced features that includes the virtually unlimited possibilities 6-channel control offers. Key Features Six fully proportional channels with user-friendly steering and throttle mixes Backlit LCD screen for better visibility USB for firmware updates and VRC compatibility Spektrum Smart Technology ready Program and fine-tune compatible AVC receivers In The Box (1) Spektrum DX6C 6-Channel Smart Transmitter (1) Spektrum SR315 3-Channel DSMR Sport Receiver (1) DX6C 6-Channel Smart Transmitter Manual Features Six fully proportional channels with user-friendly steering and throttle mixes Backlit LCD screen for better visibility USB for firmware updates and VRC compatibility Spektrum Smart Technology ready Program and fine-tune compatible AVC receivers 20-model memory Smooth, dual-ball bearing precision Frequency-agile, Spektrum DSMR® 2.4GHz technology Non-slip rubber grips Back button makes navigating the interface more intuitive Steering mix, 4-wheel steering mixing, plus one assignable Mix Bind-progress screen displays status and frame rate Compatible with DSMR and DSM2* receivers EN328 compatible Includes SR315 DSMR receiver OverviewThe DX6C is the perfect savvy solution for bashers, boaters and scalers who want a staggering list of advanced features that includes the virtually unlimited possibilities 6-channel control offers. Built around frequency agile, DSMR® 2.4GHz technology, you can use the DX6C in any type of surface application, including boats. Its range and response, particularly in noisy 2.4GHz environments, are superb.The DX6C includes new upgrades and features that makes the DX6C the ideal upgrade transmitter for RTR vehicles. Upgrades include a backlit LCD display, 6 proportional channels and USB for easy firmware updates and compatibility with the VRC Racing Simulator. Backlit LCD DisplayNew to the DX6C is the backlit LCD display that allows for better visibility under many weather conditions. The backlight is user adjustable through the Backlight set up in the transmitter. 6-Channels6-fully proportional channels allow for more flexibility and versatile control for auxiliary systems such as winches, lights, etc. Its also physically lightweight so that there's less fatigue on you during long trips, plus it's easy to transport with all of your rigs. USB ConnectivityUSB-C port allows for easy firmware updates, plus a convenient link and connection to control VRC Racing Simulator. Fits the Way You DriveThe Spektrum DX6C has many advanced programming features. So naturally it comes with advanced-level, comfortable grip, and easy to reach controls. Smart Technology CompatibleWhen combined with Spektrum Firma Smart ESCs and Spektrum Smart capable receivers, the DX6C receives telemetry data right to your transmitter through the Smart Throttle port on the receiver. Smart Throttle ESCs can send RPM, speed, ESC temp, volts and amp draw. Intuitive SimpleScroll Programming InterfaceSophisticated programming isn't worth much if it's difficult to use. The SimpleScroll interface makes navigating menus and changing settings as simple as 'scroll and click.' It's so easy to use; most users can complete complex programming tasks without ever having to look at the manual. Wheel and Trigger CalibrationThe calibration screen gives you the ability to recalibrate the steering and throttle positions for the ultimate in accuracy. AVC® (Active Vehicle Control) ProgrammingThe DX6C makes it possible to custom tune the AVC system by providing easy-access to dedicated adjustments. In addition, open channels of the DX6C can be used to adjust the AVC steering and throttle systems independently. No matter what you're driving, AVC technology can easily meet your skill level or driving style with control that makes it feel like you're driving a finely tuned vehicle that handles beautifully at every speed.
Genuine FG spare/option part. Individual prices of the parts in the tuning set: 847,06 EurosAluminum conversion kit to aluminum front axle and aluminum rear knuckle and wishbone for FG Marder.Contents:1 set
€424.95*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).