y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

rc-car-online

€11.10*

Prices incl. VAT plus shipping costs

Available

gewinde_0005 Length

Product number: gewinde_0005.1

EAN: 4058575010302

Product information "y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs."

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.

Order no.		Length:
6100/03	M8 left/right	36 mm
6100/04	M8 left/right	40 mm
7076/01	M8 left/right	54 mm
6076/01	M8 left/right	61 mm
y0988	M8 left/right	75 mm

The 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€19.90*

Details

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

Details

Customers also bought

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€34.90* €42.90* (18.65% saved)

7323/14 FG Starter pawl for all CY / Zenoah

Genuine FG spare/option part.Contents:1 piece

€9.80*

y0499 mf-RaceLine microphone filter, 1 pce.

Fits Lauterbach airbox, mf-RaceLine airbox and the new FG airboxes with the numbers 9466 and 9467. Also for all other airboxes, where a filter with an inner diameter of about 35 mm is required (stretches up to 55 mm).

€5.90*

Similar products

1213/11 FG Steering linkage l./r., M4 x 42 mm

Genuine FG spare/option part. Contents:2 pieces

€20.80*

ARA340156 ARRMA Steel Turnbuckle M6x130mm for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€14.99*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: y0988 75 mm+ 3EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€12.90*

M6 aluminum turnbuckles, 2 pcs.

gewinde_0002 Length: 7028/01 - 65 mm+ 0.4EUR

M6 aluminum turnbuckles for linkagesTurnbuckle 6028/01Aluminum, 74 mm. For all 1/6 Off-Road cars.Turnbuckle 7028/01Aluminum, 65 mm. For all 1:5er touring cars.

€9.30*

4540 FG Titanium camber rod M8 / M10 x 100 mm

Genuine FG spare/option part. Contents:2 pieces

€75.90*

67241 FG Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcs

Item N° 67241 Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcsSpare part for the Leopard 4WD 2010 version

€21.90*

67267 FG Wishbone thread rod M10/M8 x 108mm f. Leopard 2WD/4WD, 2 pcs.

Spare part for the Leopard 2WD/4WD 2010 version

€27.90*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66267B - 66 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y1471 Turnbuckle wrench 6 mm

Genuine HT spare/option part. Handy wrench for 6 mm turnbuckles.Maße: Wrench size: 6 mmLength: 75 mmContent:1 piece

€9.90*

4523 FG Titan wishbone headless pin rear M8 x 53 mm

Genuine FG spare/option part. Contents:2 pieces

€43.10*

67229 FG Turnbuckle right/left M7 x 102mm, 2pcs.

Item N° 67229Turnbuckle right/left M7 x 102mm, 2pcs.Spare part for the Leopard 2010 version

€29.90*

LOS254028 Losi Hinge Pin, Outer MTXL

Genuine Losi spare/option part.Contents:4 pieces

€10.99*

Customers also viewed

y0730 GPM Big Scale-Cross adjustable 3 shoe clutch

Genuine GPM spare/option part. The Big Scale-Cross clutch is equipped with 1.3 mm springs, is especially suitable for Off-Road use.Adjustable 3-shoe clutch for:ZenoahChung YangHPI - FueliSmartech PTAnd many other enginesThe GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!y0730y0731Content:1 piece

€99.90* €129.90* (23.09% saved)

LO5T055-ACC Spare bushings set for GPM/Losi 5ive-T front a-arms LO5T055, set

Bushings set for GPM front a-arms part no. LO5T055.

€17.99*

FG Formula 1 Sportsline

Completely mounted, with a 26 cm³ combustion engine and final speed of almost 100 km per hour, what else would you want?A further additional improvement is the installed front disk brake. A clear polycarbonate bodyshell is included.Quality and high-class equipment to a sensible price.Technical description of the Formula 1 Sportsline chassis:The undercarriage of the FG Formula 1 is built on a high-strength 5 mm alloy chassis. All chassis borings (screws) are countersunk. The front and rear axle with their various adjusting possibilities as king pin angle, trailing effect etc. consist of double delta wishbones. The double delta wishbones of the rear axle are supported by additional track rods which enable you a very fast set-up. All adjustments can be made without a dismounting of parts according to the fixed wishbone threaded rods with right-/left-handed thread.The model is equipped with 4 alloy oil-pressure shock absorbers. The push-rod suspension ensures the transmission between single wheel suspension and shock absorber.We deliver this chassis with a powerful 26 cc combustion engine. The engine's power is transmitted over a four-block Teflon clutch on a synchronous belt drive. This synchronous belt drive is also designed for a higher driving power. The BBS wheels and the tires are copies of the big models. All rotating parts are supported by ball bearings.The construction of the Formula 1 chassis is not identical with the other 1:5 scale FG models such as Merc. C-Class, Race Truck a.s.o. and therefore it can?t be converted into or from these models by a conversion kit.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Dimensions:Length: 960 mmWidth: 440 mmHeight: 230 mmWheelbase: 620 mmFormular 1 models in action!

€1,279.00* €1,416.50* (9.71% saved)

Configure now