1213/11 FG Steering linkage l./r., M4 x 42 mm

€20.80*

Prices incl. VAT plus shipping costs

Available

Product number: fg_1213_11

EAN: 3410564536179

Product information "1213/11 FG Steering linkage l./r., M4 x 42 mm"

Genuine FG spare/option part.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

y0529/01 Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball

Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread

€5.90*

Details

Customers also bought

y0529/01 Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball

y0529_01 Version: y0529/01RL One piece each with right- and left hand thread+ 4.9EUR

Variants from €5.90*

€10.80*

y2007 Top Tuning Digital Big Scale Brushless Servo V2, high quality

The brushless Big Scale servo is an extremely robust digital servo, with a high performance brushless motor, in absolute premium quality, with a full aluminum case for optimal heat dissipation in the 2-version with elaborate cooling fins, metal gears and equipped with high-quality 30 cm long silicone insulated cable. Where with other high-performance servos you still have to buy an aluminum top or case as third party options, the brushless Big Scale servo already comes with a full metal case, and above all, the aluminum to features special bushings for the intermediate shafts! Of course, the support from a metal top cover guarantees a much longer service life of the complete gearbox, than with a plastic version! Defective gears are known to be the most frequent cause of failure; especially for highly stressed servos in 1/5 and 1/6 cars! The brushless Big Scale servo is also the first choice for 1/8 and 1/10 race cars, where fast reaction times and high steering forces bring up the demand for an extremely fast and reliable servo! Also, servo mounting tab breakage on the servo cover is virtually impossible with the brushless Big Scale servo. Dimensions:Length: 40 mmWidth: 20 mmHeight: 41.4 mmWeight: 72 gramsPerformance:7.4 V6 VHolding torque kg-cm/oz-in30.0/41726,0/361Speed sec./60°0.110.14Accessories included:Three different plastic servo horns / discFour each rubber grommets and guide sleevesMounting screwsNote: Due to the extreme holding power of the brushless Big Scale servo the rubber grommets should always be installed in combination with the guide sleeves. The brushless Big Scale servo comes with accessories in a high quality plastic case with molded insert.We recommend an aluminum servo arm from the selection of the article:Alloy servoarms, for 25 teeth multi-tooth shaft 9,90 EUR

€109.90*

Servo direct power supply cable, 1 pce.

servo_strom_ohne Application: y0366 - 3 servos, battery connector universal,+ 4EUR

Servo direct power supply cable, 1 pce.With this cable the servos get their current directly from the battery without straining the receiver circuit board.Silicone insulated wires with 0.5 mm² cross section

Variants from €12.90*

€16.90*

66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.

Item N° 66244/01 Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.Spare part for the Leopard 2010 2WD/4WD version

€5.90*

66245 FG Steel ball 7 mm

Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*

6918/20 FG Countersunk screw with Torx M3x20 mm, 10 pieces

Genuine FG spare/option part.Content:10 pieces

€4.30*

Similar products

ARA340156 ARRMA Steel Turnbuckle M6x130mm for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:2 pieces

€14.99*

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005 Length: 6100/04 40 mm+ 1.2EUR

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*

€11.10*

M6 aluminum turnbuckles, 2 pcs.

gewinde_0002 Length: 7028/01 - 65 mm+ 0.4EUR

M6 aluminum turnbuckles for linkagesTurnbuckle 6028/01Aluminum, 74 mm. For all 1/6 Off-Road cars.Turnbuckle 7028/01Aluminum, 65 mm. For all 1:5er touring cars.

€9.30*

4540 FG Titanium camber rod M8 / M10 x 100 mm

Genuine FG spare/option part. Contents:2 pieces

€75.90*

67241 FG Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcs

Item N° 67241 Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcsSpare part for the Leopard 4WD 2010 version

€21.90*

67267 FG Wishbone thread rod M10/M8 x 108mm f. Leopard 2WD/4WD, 2 pcs.

Spare part for the Leopard 2WD/4WD 2010 version

€27.90*

y0782/03 burnished M8 steel turnbuckles - 66 / 84 mm

gewinde_0005_02 Length: 66267B - 66 mm

Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*

y1471 Turnbuckle wrench 6 mm

Genuine HT spare/option part. Handy wrench for 6 mm turnbuckles.Maße: Wrench size: 6 mmLength: 75 mmContent:1 piece

€9.90*

4523 FG Titan wishbone headless pin rear M8 x 53 mm

Genuine FG spare/option part. Contents:2 pieces

€43.10*

67229 FG Turnbuckle right/left M7 x 102mm, 2pcs.

Item N° 67229Turnbuckle right/left M7 x 102mm, 2pcs.Spare part for the Leopard 2010 version

€29.90*

LOS254028 Losi Hinge Pin, Outer MTXL

Genuine Losi spare/option part.Contents:4 pieces

€10.99*

y0782/01 Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.

gewinde_0005_01 Length: 84 mm, 66226+ 2.05EUR

Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*

€21.95*