y0733/01 Clutch shoes with bonded organic friction pads

rc-car-online

€54.90*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: y0733_01

EAN: 4058575047896

Product information "y0733/01 Clutch shoes with bonded organic friction pads"

Clutch shoes with bonded organic friction pads for BigScale Extreme clutch.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

GPM SLO5T 16/18/19/20/21 steel pinion incl. washer for Losi 5ive-T, 5ive-B and Mini

gpm_slo5t Teeth: SLO5T019T - 19 teeth+ 5EUR

Hardened steel pinion set for Losi 5ive-T, 5ive-B and Mini, with corresponding engine mount inserts included. All parts with laser etched tooth count.Please note: The pinion do fit the 5ive-T 2.0 as well, of course. However, you then have to use the 5ive-T 2.0 engine mount inserts of the appropriate tooth count, inserts from the 5ive-T do not fit! Available with 16, 18T/19T/20T/21T. The 19T pinion is stock equipment in Losi 5ive-T and Mini, 20T is stock in the 5ive-B.The 16T pinion is profile shifted and has the same dimensions as a normal 18T pinion.It is specially made for vehicles where the stock tires are replaced by much larger diameter rubber (i.e. monster truck tires and MadMax Giant Grip).Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter.SLO5T018T replaces LOSB5046 and LOSB5805SLO5T019T replaces LOSB5044 and LOSB5801SLO5T020T replaces LOSB5045 and LOSB5802The higher the tooth count, the higher the top speed!

Variants from €39.90*

€44.90*

Details

y0733/063 Clutch spring white, 1.6 mm, 3 pcs.

Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini

Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*

7316/09, FG OEM clutch complete, set for Zenoah/CY/Fuelie/Losi engines

Complete clutch with spring, carrier and bolts. For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.

€44.90*

y0119 Steel pinion 16 teeth

Steel pinion 16 teeth suitable for 46 mm main gear for FG models.Modul 1,5

€29.90*

y19355 nitrided hardened Steel pinion with 17 to 46 teeth

Nitrided hardened, highly wear-resistant.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)For use on the clutch bell of FG cars in combination with a 46t spur gear on the layshaft. Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€29.90*

Similar products

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0733/062 Clutch spring black, 1.5 mm, 3 pcs.

Clutch spring black, 1.5 mm, spare part for BigScale Extreme clutch, stock spring.

€9.90*

y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.

Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/07 Adjustment screw M5x7.6 mm, 3 pcs.

Adjustment screw M5x7.6 mm, spare part for BigScale Extreme clutch (2.5 mm allen wrench size).

€9.90*

y0733/08 Clutch body

Clutch body, spare part for BigScale Extreme clutch.

€29.90*

y0733/09 Front plate

Front plate, spare part for BigScale Extreme clutch.

€19.90*

y0733/02 Extremely wear resistant organic friction pad

Extremely wear resistant organic friction pad, spare part for BigScale Extreme clutch.Since the connection between lining and shoe is highly loaded, the careful bonding with curing in an oven is of particular importance. Please use exclusively the special Clutch-Safe glue #y0743.You can find ready-to use cluth shoes with correctly bonded friction pads under at # y0733/01.

€19.90*

Details

y0733/03 Mounting screws for friction pads and front plate

Mounting screws for friction pads and front plate, spare part for BigScale Extreme clutch.Dimensions:M3 x 7 mm (f0r 2 mm allen wrench)

€3.90*

y0733/063 Clutch spring white, 1.6 mm, 3 pcs.

Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/061 Clutch spring green, 1.4 mm, 3 pcs.

Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/05 Pressure plate, 1.5 mm flange thickness

Pressure plate, 1.5 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*

y0733/04 Pressure plate, 0.8 mm flange

Pressure plate, 0.8 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*

Customers also viewed

y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Details

AREA-XL 017/04 Spare pins

Spare part for AREA-XL 017/02 Center differential tower with tuning brake system for Losi Desert XL.Content:4 pieces Montage video:

€5.90*

66226 FG Turnbuckle M10/M8x84mm 4WD, 2 pcs.

Genuine FG spare/option part.Contents:2 pieces

€18.90*