y0733/04 Pressure plate, 0.8 mm flange

rc-car-online

€9.90*

Prices incl. VAT plus shipping costs

Available

Product number: y0733_04

EAN: 4058575047926

Product information "y0733/04 Pressure plate, 0.8 mm flange"

Pressure plate, 0.8 mm flange thickness, spare part for BigScale Extreme clutch.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0733/01 Clutch shoes with bonded organic friction pads

Clutch shoes with bonded organic friction pads for BigScale Extreme clutch.

€54.90*

Details

y0733/05 Pressure plate, 1.5 mm flange thickness

Pressure plate, 1.5 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*

y0733/09 Front plate

Front plate, spare part for BigScale Extreme clutch.

€19.90*

y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.

Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/02 Extremely wear resistant organic friction pad

Extremely wear resistant organic friction pad, spare part for BigScale Extreme clutch.Since the connection between lining and shoe is highly loaded, the careful bonding with curing in an oven is of particular importance. Please use exclusively the special Clutch-Safe glue #y0743.You can find ready-to use cluth shoes with correctly bonded friction pads under at # y0733/01.

€19.90*

Details

y0733/08 Clutch body

Clutch body, spare part for BigScale Extreme clutch.

€29.90*

y0733/062 Clutch spring black, 1.5 mm, 3 pcs.

Clutch spring black, 1.5 mm, spare part for BigScale Extreme clutch, stock spring.

€9.90*

y0733/07 Adjustment screw M5x7.6 mm, 3 pcs.

Adjustment screw M5x7.6 mm, spare part for BigScale Extreme clutch (2.5 mm allen wrench size).

€9.90*

y0733/063 Clutch spring white, 1.6 mm, 3 pcs.

Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/03 Mounting screws for friction pads and front plate

Mounting screws for friction pads and front plate, spare part for BigScale Extreme clutch.Dimensions:M3 x 7 mm (f0r 2 mm allen wrench)

€3.90*

y0733/061 Clutch spring green, 1.4 mm, 3 pcs.

Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*

Customers also viewed

LOS250019 Losi LED Light Bar set, complete, DBXL-E

Genuine Losi spare/option part. Contents:1 piece

€59.99*

F1465 Futaba edge protector - 1pce.

Original part no. F1465Fits 3-PDF and 3-PJ as well.

€29.30*

Brass spacer, Baja premium brake,2 pcs., y0010

€2.00*

y1519 Complete screws/nuts/washer set for Losi 5ive-T + 5ive-T 2.0

Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi 5ive-T and 5ive-T 2.0.The set includes a total of 481 screws, in different quantities which are all used on the Losi 5ive-T.14 sizes of cap head screws12 sizes of CSH screws21 sizes of button head screws6 sizes of set screws5 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:2 piecesM2,5x84 piecesM2,5x2020 piecesM3x1010 piecesM3x124 piecesM4x84 piecesM4x124 piecesM4x202 piecesM4x252 piecesM4x402 piecesM5x162 piecesM5x206 piecesM5x302 piecesM5x352 piecesM5x75Grub screws:7 piecesM3x310 piecesM4x54 piecesM4x84 piecesM5x64 piecesM5x404 piecesM8x16CSH screws in 10.9:16 piecesM4x1222 piecesM4x164 piecesM4x2024 piecesM4x256 piecesM5x1211 piecesM5x202 piecesM5x256 piecesM5x302 piecesM5x5010 piecesM6x162 piecesM6x208 piecesM6x25Safety washers:4 piecesM5Self-locking nuts:10 piecesM312 piecesM412 piecesM510 piecesM6Washers:10 piecesM3,210 piecesM4,310 piecesM5,36 piecesM6,4Button head screws in 10.9:4 piecesM3x820 piecesM3x1010 piecesM3x124 piecesM3x204 piecesM4x84 piecesM4x124 piecesM4x166 piecesM4x2024 piecesM4x254 piecesM4x305 piecesM4x355 piecesM4x404 piecesM5x104 piecesM5x1611 piecesM5x206 piecesM5x308 piecesM5x354 piecesM5x404 piecesM6x164 piecesM6x204 piecesM6x30

€44.90*

Details

160323 HPI Baja 5B SBK build kit Gas-powered without Motor and RTR

BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale Off-Road Buggy Ready for your 23-32cc RC engine Ready for your electronics Enclosed radio box Baja desert racing body design Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Race spec Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub

€769.00*

Configure now

GPM Air filter cover, no. BJAFCO, 1 pce.

GPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.

€13.30*