EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

y0733/065 Clutch spring candy red, 1.8 mm, 3 pcs.

Skip image gallery

€9.90*

Prices incl. VAT plus shipping costs

Available

Product number: y0733_065
EAN: 4058575047971

Product information "y0733/065 Clutch spring candy red, 1.8 mm, 3 pcs."

Clutch spring candy red, 1.8 mm, optional part for BigScale Extreme clutch.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Alternatives

y0733/061 Clutch spring green, 1.4 mm, 3 pcs.
y0733/061 Clutch spring green, 1.4 mm, 3 pcs.
Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*
y0733/062 Clutch spring black, 1.5 mm, 3 pcs.
y0733/062 Clutch spring black, 1.5 mm, 3 pcs.
Clutch spring black, 1.5 mm, spare part for BigScale Extreme clutch, stock spring.

€9.90*
y0733/063 Clutch spring white, 1.6 mm, 3 pcs.
y0733/063 Clutch spring white, 1.6 mm, 3 pcs.
Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*
y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.
y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.
Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*

Customers also bought

y0739/01 Spare aluminum clutch shoes, set of three
y0739/01 Spare aluminum clutch shoes, set of three
Aluminum clutch shoes, spare part for GPM BigScale Alu clutch # y0739.Slight aluminum deposits in the clutch bell and corresponding wear marks in the clutch shoes are normal with the Big Scale ALLOY clutch and have no negative effect on the function. Caution: It is very important that when swapping the full-aluminum clutch shoes against the organic friction pads of a Big Scale CROSS or RACE to use a different or new , because the rough surface of the aluminum deposits in the clutch bell left by the Big Scale ALLOY will cause a high wear on the organic pads.

€44.90*

Similar products

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads
y0743 Clutch-Safe 10 g, adhesive especially for clutch pads
Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*
y0733/03 Mounting screws for friction pads and front plate
y0733/03 Mounting screws for friction pads and front plate
Mounting screws for friction pads and front plate, spare part for BigScale Extreme clutch.Dimensions:M3 x 7 mm (f0r 2 mm allen wrench)

€3.90*
y0733/05 Pressure plate, 1.5 mm flange thickness
y0733/05 Pressure plate, 1.5 mm flange thickness
Pressure plate, 1.5 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*
y0733/061 Clutch spring green, 1.4 mm, 3 pcs.
y0733/061 Clutch spring green, 1.4 mm, 3 pcs.
Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*
y0733/09 Front plate
y0733/09 Front plate
Front plate, spare part for BigScale Extreme clutch.

€19.90*
y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.
y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.
Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*
y0733/063 Clutch spring white, 1.6 mm, 3 pcs.
y0733/063 Clutch spring white, 1.6 mm, 3 pcs.
Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*
y0733/08 Clutch body
y0733/08 Clutch body
Clutch body, spare part for BigScale Extreme clutch.

€29.90*
y0733/04 Pressure plate, 0.8 mm flange
y0733/04 Pressure plate, 0.8 mm flange
Pressure plate, 0.8 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*
y0733/062 Clutch spring black, 1.5 mm, 3 pcs.
y0733/062 Clutch spring black, 1.5 mm, 3 pcs.
Clutch spring black, 1.5 mm, spare part for BigScale Extreme clutch, stock spring.

€9.90*
y0733/07 Adjustment screw M5x7.6 mm, 3 pcs.
y0733/07 Adjustment screw M5x7.6 mm, 3 pcs.
Adjustment screw M5x7.6 mm, spare part for BigScale Extreme clutch (2.5 mm allen wrench size).

€9.90*

Customers also viewed

F1465 Futaba edge protector - 1pce.
F1465 Futaba edge protector - 1pce.
Original part no. F1465Fits 3-PDF and 3-PJ as well.

€29.30*
y1430 Spark plug tester for 1/5 & 1/6 cars
y1430 Spark plug tester for 1/5 & 1/6 cars
The spark plug tester wiil be put in line between the spark plug in the engine and the spark plug cap. When the spark plug is in good working order, pulling the recoil starter will produce a spark easily visible in the clear section of the tester (see video!).

€14.90*
y0739/01 Spare aluminum clutch shoes, set of three
y0739/01 Spare aluminum clutch shoes, set of three
Aluminum clutch shoes, spare part for GPM BigScale Alu clutch # y0739.Slight aluminum deposits in the clutch bell and corresponding wear marks in the clutch shoes are normal with the Big Scale ALLOY clutch and have no negative effect on the function. Caution: It is very important that when swapping the full-aluminum clutch shoes against the organic friction pads of a Big Scale CROSS or RACE to use a different or new , because the rough surface of the aluminum deposits in the clutch bell left by the Big Scale ALLOY will cause a high wear on the organic pads.

€44.90*
y0730/17 Clutch housing
y0730/17 Clutch housing
Genuine GPM spare/option part. Part no. 17 for GPM Big-Scale clutch.y0730y0731Content:1 piece

€22.90*
y0751 K&N Filter cleaner 946 ml
y0751 K&N Filter cleaner 946 ml
Genuine K&N spare/option part. K&N Power Kleen is a high-performance cleaner and degreaser used to remove road grime, engine exhaust and grease from cotton air filters. It is now formulated to clean those troublesome and demanding cleaning jobs. This cleaner is specially formulated to remove oil, lubricants, grease, grime, and other deposits from most surfaces including cotton air filters, painted surfaces, chrome, plastic and more! Genuine K&N air filter cleaner,especially formulated for cleaning cotton air cleaners.Content:946 ml / 32 OZ

Content: 946 Milliliter (€16.17* / 1000 Milliliter)

€15.30*
y1453/01 Elastoplastic Losi 5ive-T/2.0 body shell red
y1453/01 Elastoplastic Losi 5ive-T/2.0 body shell red
Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! Color red (the decals pictured are not included!). The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware

€199.90*
y1183/02 FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.
y1183/02 FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.
Item N° y1183/02FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.These adapters are machined from gas nitrited steel and enable you to put standard rims with 18 mm square drive (FG, Carson, Lauterbacher a.s.o.) on the HPI Baja 5B/SS/T. The track width will be substantially increased.For a complete set covering front and rear axle you need part number y1183.This set includes rim adapters with installation hardware for the front axle only.Measures for front:Outer diameter: circa 17,59 mLength: circa 55,10 mm

€24.90*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency