y0733/08 Clutch body

rc-car-online

€29.90*

Prices incl. VAT plus shipping costs

Available

Product number: y0733_08

EAN: 4058575047995

Product information "y0733/08 Clutch body"

Clutch body, spare part for BigScale Extreme clutch.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0733/01 Clutch shoes with bonded organic friction pads

Clutch shoes with bonded organic friction pads for BigScale Extreme clutch.

€54.90*

Details

y0733/05 Pressure plate, 1.5 mm flange thickness

Pressure plate, 1.5 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*

y0733/061 Clutch spring green, 1.4 mm, 3 pcs.

Clutch spring green, 1.4 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/09 Front plate

Front plate, spare part for BigScale Extreme clutch.

€19.90*

y0733/064 Clutch spring orange, 1.7 mm, 3 pcs.

Clutch spring orange, 1.7 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/02 Extremely wear resistant organic friction pad

Extremely wear resistant organic friction pad, spare part for BigScale Extreme clutch.Since the connection between lining and shoe is highly loaded, the careful bonding with curing in an oven is of particular importance. Please use exclusively the special Clutch-Safe glue #y0743.You can find ready-to use cluth shoes with correctly bonded friction pads under at # y0733/01.

€19.90*

Details

y0733/065 Clutch spring candy red, 1.8 mm, 3 pcs.

Clutch spring candy red, 1.8 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/063 Clutch spring white, 1.6 mm, 3 pcs.

Clutch spring white, 1.6 mm, optional part for BigScale Extreme clutch.

€9.90*

y0733/03 Mounting screws for friction pads and front plate

Mounting screws for friction pads and front plate, spare part for BigScale Extreme clutch.Dimensions:M3 x 7 mm (f0r 2 mm allen wrench)

€3.90*

y0733/04 Pressure plate, 0.8 mm flange

Pressure plate, 0.8 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*

y0733/062 Clutch spring black, 1.5 mm, 3 pcs.

Clutch spring black, 1.5 mm, spare part for BigScale Extreme clutch, stock spring.

€9.90*

Customers also viewed

TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch

tt_tt1000 Connector: TT1000/01 Universal in - Universal out

Genuine Top Tuning spare/option part. Top Tuning The 20-amp Bigscale switch allows for a maximum input voltage of 30 volt. It is specifically designed as a receiver switch for use in combination with the Hitec HS-1005SGT servo and 4s receiver battery. The switch can also be used for other applications at your discretion with batteries up to 6S.Note: Top Tuning the electronic 20 amp Bigscale high voltage switch delivers the batterys full voltage. It does not replace a voltage regulator! The components which follow down the line (voltage regulator / servos / receiver) must be matched to this voltage! Using the latest MOSFET technology allows the 20 amp Bigscale high voltage switch to handle extreme loads, despite its small size. A blue LED status light clearly displays the activated mode. The 20 amp Bigscale high voltage switch is dust-and splash protected. He has an extremely low internal resistance and very low power consumption in off mode. Nevertheless it is recommended to unplug the battery when the model will not be used for an extended period. Properties:Voltage range: 3 to 30 VLoad: 20 ampsStandby consumption: 17 µAOperating temperature: - 15 ° C to +50 ° CCable length:Battery side 250 mmReceiver side 130 mmWeight: 13 gramsDimensions:Length: 29 mm Width: 13 mmHeight: 12 mmContents:1 piece

€42.90*

7138 FG bowden cable holder for Gas/Zenoah - 1pce.

bowden cable holder for Gas/Zenoah

€4.20*

7028/01 FG Track rod left/right for 1:5 65 mm, 2 pcs.

Genuine FG spare/option part.Alloy track rod.

€12.90*

s054309 Smartech aluminum upper a-arm mount front 4x4

Genuine Smartech spare/option part.Machined alloy version replaces the breakage prone plastic stock part.Suitable for Smartech Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan.Content:1 piece

€29.90*

y19302/01 Flywheel and Clutch puller CY, Zenoah, HPI, Losi

Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece

€17.90*

y0733/04 Pressure plate, 0.8 mm flange

Pressure plate, 0.8 mm flange thickness, spare part for BigScale Extreme clutch.

€9.90*